Download pdf Brochure - James G. Murphy Co.

PUBLIC James G. AUCTION
Murphy Co.
Commercial & Industrial Auctioneers
9AM - SATURDAY James - MAY G. 5
PUBLIC AUCTION
Murphy Inc.
Preview 8-5, Friday, May 4
Commercial & Industrial Auctioneers
18226 68th Ave Discontinuing NE, Kenmore, Operations, Equipment WA No Longer Required
Humboldt Flakeboard Panels, Inc
Hambro Forest Products, Inc
Particleboard Equipment, Rolling Stock
9AM - THURSDAY - JULY 26
Preview 8-4 Wednesday, July 25 or by appointment
4700 West End Rd, Arcata, CA 95521
Washington Caul Plate Cooler
Leckenby Runaround Section
Cat 950G
Siempelkamp Board Former
Bid live or bid online with MurphyLIVE!
For more information go to www.murphyauction.com • Phone 425.486.1246
For more information go to murphyauction.com • Phone 425.486.1246

NO MINIMUMS - NO RESERVES
Board Press-Caul Transfer & Recovery System
WASHINGTON 6475 ton, 4’x24’ simultaneous 16-opening press, (19) 5”x64”x306”
heating & cooling platens, 1150 hp 11-pump hydraulic unit, (2) 150 hp hot press
pumps, 30 hp filter cooler, 8” inlet & outlet headers, all controls & electrics, catwalk,
supports & containment, MARLEY AQUATOWER cooling tower w/pumps, top platen
170,000 lbs, moving platen 74,000 lbs, bottom platen 134,000 lbs, hot plate 25,000
lbs, (8) columns 126,000 lbs, (4) main rams 108,000 lbs, (4) main cylinders 148,000
lbs, (4) jack rams & cylinders 28,000 lbs, simultaneous closing unit 10,000 lbs,
controls & electrics, approx 650 tons (located in Arcata)
LECKENBY caul transfer & recovery system including hydraulic caul turner, 13’ dia. x
27’ long, holds (17) cauls, (2) rough board side trim hogger saws, tangent type rotary
wicket lowering board cooler, 20’ dia. x 28’ long w/capacity of (32) boards, includes
all forming, mat & board conveyors, hydraulic units, drive controls & electrics, no caul
plates (located in Arcata)
Board Presses & Formers
1989 PATHEX 8400 ton, 8’x27’ single opening top pressure board press, (12) main
cylinders, (4) pull back cylinders, (6) columns, 8’ steel belt w/DC drive, outfeed chains
to vacuum stacker, BISON N1350M single head former w/infeed belt, mat saw,
pumps, piping, electrics & controls, approx. 300 tons (located in Crescent City, sold
by photo in Arcata)
PATHEX 7525 ton press, 8’x24’ window frame down stroke board press, (2)
2-3/4”x107”x300” platens, 109” wear plate, 12” daylight, (12) main cylinders, (4) pull
back cylinders, (6) columns, 105” steel belt w/DC drive, outfeed chains to vacuum
stacker, BISON traveling 3-head former, mat saw, pumps, piping, electrics & controls,
s/n: 4744, approx. 350 tons (located in Crescent City, sold by photo in Arcata)
SIEMPELKAMP 8’x16’ single opening board press, (8) main cylinders, (4) pull back
cylinders, (4) columns, 8’ steel belt w/DC drive, SIEMPELKAMP traveling 3-head
former, outfeed rolls & transfer to over end stacker, pumps, piping, electrics &
controls, approx. 225 tons (located in Crescent City, sold by photo in Arcata)
Refiners-Grinders
SPROUT WALDREN 45-1B gravity discharge refiner, 2000 hp/1785 rpm, 445 volt
(approx. 30,000 lbs) stainless steel disc, plates & internal parts, s/n: 74-1605 (located
in Arcata)
PALLMAN CENTRA SELECTOR PPSM14P refiner, 48” ring, TOSHIBA 250 hp impeller
ring drive, GE 25 hp refining ring drive, approx 9000 lbs, s/n: 8472011 (located in
Arcata)
PALLMAN PKSM12-600 refiner, spare not installed (located in Arcata)
(2) 2006 GRUENDLER 4024 ARISTOCRAT fine grinders, 40”x24” capacity, (8)
hammers per pocket, TECO 125 hp motor (s/n: 50048 located in Arcata; s/n: 50049
located in Crescent City, sold by photo in Arcata)
2006 GRUENDLER 4024 AFG fine grinder, 40”x24” capacity, (8) hammers per pocket,
TECO 125 hp motor, s/n: 500478 (located in Arcata)
GRUENDLER 24-40 PEERLESS grinder, 24”x40” capacity, MARATHON 125 hp motor,
s/n: 22689 (located in Arcata)
GRUENDLER 24-40 center feed grinder, 24”x40” capacity, BALDOR 125 hp motor, s/n:
21651 (located in Arcata)
Sizer-Hogs
JEFFREY 30 WBSS chip sizer/hammermill, 24”x21” rotor, 4-rows w/(10) hammers,
BALDOR Super E 150 hp motor, approx 3000 lbs, s/n: 886562 (located in Arcata)
JEFFREY 36”x48” Type B3 pulverizer/hammer hog, 30”x48” opening, 6-rows of (36)
hammers, AC 150 hp/1180 rpm motor, approx 14,600 lbs, s/n: 8919 (located in
Arcata)
JEFFREY 45WB hammer hog, 41”x27-1/2” opening, 32”x41” rotor, 6-rows of hammers,
GE 250 hp motor, approx 9880 lbs, s/n: 12395 (located in Arcata)
MONTGOMERY 34HD-60BH blo-hog, SIEMENS 100 hp motor, approx 15 tph bark,
approx 10,000 lbs, s/n: 1670 (located in Arcata)
MONTGOMERY blo-hog, TOSHIBA 150 hp motor, approx 10,000 lbs (located in Arcata)
CRESSWOOD EF72-100 grinder/board breaker, 72” arbor w/TOSHIBA 100 hp motor,
s/n: 1000995, EDEM 72”x20’ vibratory conveyor, 36”x60” scissor lift, 24”x24’ covered
paddle belt & 24”x30’ transfer belt (located in Crescent City, sold by photo in
Arcata)
Auctioneers note: A number of items are
located at the Hambro Forest Products
facility in Crescent City and will be sold by
photo at the Arcata auction site.

NO MINIMUMS - NO RESERVES
Screeners-Centrifuge-Scalping Rolls
(3) ROTEX 581 AAMM 6’x12’ auto tensioning screens, 304 stainless screen, 3/4” wire
clothing/open, 1-5/8” balls (3) per pocket, machine speed 200, machine slope +4°,
swing weight 2150 lbs, 7.5 hp motor, top covers w/dust shield, s/n’s: 205604A,
204188A & 204182B (located in Arcata)
(2) ROTEX 532A independently fed two surface 4’x10’ screeners, ball & mesh screening,
7.5 hp motor, top covers w/dust cover (located in Arcata)
ACROWOOD 6096 diamond roll viro screen, 36”x96”x188” (60) adjustable knurled rolls,
15 hp motor to FALK 4207JR09 quad drive 9:1 reducer, s/n: 541099 (located in
Arcata)
SWACO 518 centrifuge w/14”x56” stainless steel bowl, 1900-3200 rpm, 100-250 gpm
feed rate, 4.33” pitch stainless steel conveyor, 25 hp main drive, 7.5 hp back drive,
REX PLANETARY 57:1 reducer, 120”L x 70”W x 34”H, 4660 lbs (located in Arcata)
22’ scalping screen w/(22) 32” rolls (located in Arcata)
Sander Line w/T&G Machine & Stacker
KIMWOOD CONTROL MASTER 48” 6/8-head sander w/added 2-head finishing station,
auto tracking, (2) 200 hp opposed heads, (2) 150 hp opposed heads, (2) 125 hp offset
heads, (2) 100 hp offset heads, 6’-16’ length, 3/8”-1-1/4” thickness, 250 fpm machine
capacity, 22’ in & outfeed rollcases w/40 hp DC motor, AC drives, ABB/IES size 5
starters, spare belts, parts, s/n: 50256400 (located in Arcata)
CONVEY KEYSTONE 16’ panel feed station w/10,000 lb scissor lift, powered infeed rolls,
s/n: D126170 (located in Arcata)
MDI CR85 metal detector, 50” tunnel, s/n: 952859 (located in Arcata)
TRIENCO 506 blow detector (located in Arcata)
DURAND 48” tongue & groove machine, 48”W x 96”L, 3/8”-1-1/2” thick, 100-300 fpm,
PERSKE 15 hp/3500 rpm motor (located in Arcata)
20’ 6” x 2-strand grade station w/EATON & FUJI drives, SAMUEL & LABEL JET bar code
machines, BURLEBACH GM6 panel marker (located in Arcata)
BURELBACH 3-bay panel stacking system, 46 to 48 lbs per sheet, 4’-16’ length, 48”-
51” width, 3/8”-1-1/2” thickness, 25 ppm, 36” stack height, (1) continuous & (2) noncontinuous
tipple type stackers, outfeed rolls, 40 hp hydraulic unit, outfeed conveyor to
SIGNODE 4 type 2 banding dispenser, s/n: 331 (located in Arcata)
Skinner Saw Line
GLOBE 16B-RH skinner saw w/(2) 14” saws x 2-1/4” arbors, approx 15 hp/3600 rpm
arbor motors, left hand saw adjustable, 7.5 hp driven feed thru rollcase, (40) hold
down rolls, 48”x25’ infeed & outfeed rollcases, spare saws, s/n: 16B7417 (located in
Arcata)
GLOBE 13J 5-saw x 24’ equalizer trimmer, (3) adjustable saws w/20 hp/3450 rpm motors,
15’ 5-strand lugged infeed transfer, hydraulic unit, clean out belt, spare saws, s/n:
13J7415 (located in Arcata)
MOR-PANL 24’ continuous over end stacker w/4’ 12-arm lowering hoist & 10-arm
accumulator stacker, 8’ 8” 9-strand infeed belt w/hydraulic driven, 17’ 10-strand
outfeed transfer, 20 hp motor to reducer, 25 hp hydraulic unit, 24” x approx 60’
cleanout belt, max capacity 54”W x 44”H x 25’L (located in Arcata)
T1-11 Specialty Saw Line
KVAL 48” capacity T1-11 saw w/transverse shaft, (2) vertical side heads, approx 10 hp
motors, adjustable from 16”-48” horizontal transverse saw shaft, approx 20 hp motor,
feed thru rolls, EATON drive, 48”x16’ infeed rollcase, side heads, saws & spacers
(located in Arcata)
KEYSTONE 16’ hydraulic stacker w/hook feeder, scissor lift, 6’ 4-strand infeed transfer,
gravity rolls, 10 hp hydraulic unit (located in Arcata)
16’ scissor lift w/board hook & rollcase, 16’ outfeed rollcase to SIGNODE 4 type strap
dispenser, 12’ 4-strand H78 outfeed transfer (located in Arcata)
Router
TOYO RANC-34-2 CNC router w/automatic feeder & APQ-22 panel turner, 4-heads x
7.5 kw, 4500-1500 rpm, 12mm-51mm thickness x 254mm-915mm width x 1918mm-
2363mm length x 54 kg weight capacities, 25.4mm collect chuck, air cylinder tool
selection, FANUC 8-axis control, APQ turning machine, APY67 & APY68 infeed/
stacker systems (located in Arcata)
Panel Saw
HOLZMA type HCL22/43/16QS panel saw system (partially installed), 22-saw carriage
w/18 kw main saw, 2.2 kw scoring saw, 1.5 kw travel motor, angular fence, LIFT-O-
MAT hoists w/powered rolls, 64”x168” max to 20”x73” min panel sizes (remainder of
system disassembled), s/n: 0-241-092-0621 (located in Arcata)
1970 2010
Bid live or bid online with MurphyLIVE!

Humboldt Flakeboard Panels Inc, Arcata, CA
Fab Edge Machine
Custom built fab edge machine w/TOPANGA 81 single poly strand feed thru transfer,
s/n: 8100, 10 hp vertical spindle hogging head, 10 hp horizontal spindle radius head,
(2) 2” edge belt sanders, filler station w/ARO pumps, SAFTRONICS adjustable
frequency drive, 6’ 8-strand C55D infeed transfer to 18”x15’ scissor lift to gravity
rollcases, 5 & 10 hp hydraulic unit, starter cabinet, controls, spare heads (located in
Arcata)
Air Compressors-Dryers-Air Receivers
QNW 1011D rotary screw compressor, 200 hp, s/n: 990358C (located in Arcata)
QNW 740B rotary screw compressor, 150 hp, s/n: 810214 (located in Crescent City,
sold by photo in Arcata)
QNW 740B rotary screw compressor, 150 hp, s/n: 780316 (located in Arcata)
QNW 490B rotary screw compressor, 100 hp, s/n: 91103 (located in Crescent City,
sold by photo in Arcata)
COMPAIR MAKO 5407-15-V3 compressor, 6000 psi, 4-stage, 158.6 hrs, s/n:
A414211AH1127 (located in Crescent City, sold by photo in Arcata)
BREATHING AIR SYSTEMS 10,000 psi air purifier (located in Crescent City, sold by
photo in Arcata)
ZEKS 1600HSFA400 heat sink true recycling dryer, s/n: 233487 (located in Crescent
City, sold by photo in Arcata)
ZEKS 1000HSFA400 air dryer, s/n: 234078 (located in Arcata)
2005 JOHNSTONE 48”x120” air receiver, 150 psi, s/n: 26468 (located in Arcata)
CANPAR 28”x75” air receiver, 165 psi, s/n: C6907 (located in Arcata)
Blowers-Feeders
2007 WESTERN PNEUMATICS 1437-5111, 14”x37”, 5111 series high pressure blower
w/TOSHIBA 300 hp motor to FALK 2070Y1-LR, 850 rpm square box reducer (at 40
ton chip dump; located in Arcata)
RADER 1230-5100, 12”x30”, 5100 series high pressure blower w/TOSHIBA 250 hp
motor, silencer, s/n: A111173 (at 50 ton chip dump; located in Arcata)
SUTORBILT 614-88, 6”x14” 88 series high pressure blower w/40 hp motor (located in
Arcata)
RADER 35X50EF, 35”x50” chip feeder w/15 hp motor to FALK quad drive shaft
mounted reducer (at 40 ton chip dump; located in Arcata)
32”x40” chip feeder w/TECO 5 hp motor to FALK quad drive 25.04:1 shaft mounted
reducer (located in Arcata)
Baghouses-Silos-Cyclones-Surge Bins-Spark Detection
2000 WESTERN PNEUMATICS 528 cart FLT reverse air baghouse w/(528) 4-1/4”x10’
bags, DYNAMIC FAN CORP 25 hp fan, pulse jet cleaning, s/n: FLT212-0023530
(located in Arcata)
2000 WESTERN PNEUMATICS 448 cart FLT reverse air baghouse w/(448) 4-1/2”x10’
bags, DYNAMIC FAN CORP 25 hp fan, pulse jet cleaning, s/n: FLT211-00235
(located in Arcata)
1997 WESTERN PNEUMATICS 630 baghouse, (630) 5”x124” bags, s/n: FLT169-
9718386 (located in Arcata)
CARTER DAY 376RF8 baghouse w/(376) 8’ bags, 3840 sq ft cloth area, s/n: 1G-
023439 (located in Arcata)
WESTEC multi-cone dust collector system w/(12) cone collection systems w/(2) each
rotary valves (located in Arcata)
WELLONS A-21 approx 80-unit fuel silo w/cyclone & conveyor infeed, dual screw auger
outfeed (located in Arcata)
WELLONS approx 25-unit fuel silo w/conveyor infeed, dual screw auger outfeed
(located in Arcata)
(4) 6’ dia. long neck cyclones w/bindicators (located in Arcata)
(6) 4’ dia. long neck cyclones w/rotary air locks (located in Arcata)
Approx 40-unit split live bottom surge bin w/(2) sets of (4) screw augers (located in
Arcata)
(4) Approx 12’x12’x16’ live bottom surge bins w/(6) screw augers w/(2) motors to FALK
square box 20 rpm reducers (located in Arcata)
(2) Approx 6’x6’10’ live bottom surge bins w/(4) screw augers (located in Arcata)
Approx 4’x6’x10’ live bottom surge bin w/(3) screw augers (located in Arcata
Assortment of individual screw augers (located in Arcata)
2007 CLARKES C55 hi-speed abort gate (located in Arcata)
GRECON BS7 & SR 12/6 series spark detection & extinguishing systems (located in
Arcata)
(20±) Low pressure blowers to 300 hp (located in Arcata)
Large quantity of high & low pressure blowpipe to 5’ dia. 5-way gate, flatbacks (located
in Arcata)
Bid live or bid online with MurphyLIVE!

JULY 26, 2012 • AUCTION STARTS 9AM
Boilers-Precipitators
KEELER DS-9-5 package boiler, 300 psi design pressure, 285 psi operating pressure,
25,000 lbs of steam per hour, COEN 210FYR COMPAK gas & sander dust burner,
3052 sq ft heating surface, 560 cu ft furnace volume, industrial steam deaerator tank,
feed water & chemical pumps & tanks, s/n: 15170 (located in Arcata)
(3) GEOENERGY 1013-189 wet electro precipitators w/(189) 10”x13” 304 stainless
steel precipitator tubes w/304 stainless steel support & disk electrodes,
transformer, rectifier & controls, quench chamber, cyclone, collector section, sump/
gas discharge section, blowers, heaters, recycle system w/clarifying tank (located in
Arcata)
Generator
ONAN 150DYE-15R/299058, 150 kw standby generator, 738.9 hrs, 150 kw 3-phase, 99
kw 1-phase, power factor 0.8, KOMATSU 0671A 24 volt 6-cylinder diesel engine, s/n:
56033, CUMMINS/ONAN OT600 amp transfer switch, s/n: F870900156 (located in
Crescent City, sold by photo in Arcata)
Dryers
(3) GUARANTY & BUTNER 20,000-40,000 lb/hr triple pass rotating drum dryers, 12’ dia.
x 40’ long ENERGEX 45 burners, 45M btu/hr, inlet, circulating & exhaust fans, infeed
conveyors (located in Arcata)
Blenders-Mixers-Tanks-Pump
(3) LITTLEFORD EK60 chip gluing blender w/50 hp motors, WP20 psi, 1050-26,400 lbs/
hr, 11 gpm cooling water, 4800 lbs, s/n: 10718, 10685 (located in Arcata)
(2) 36” 3-blade dry mixers (located in Arcata)
Assortment of poly & steel tanks to approx 10,000 gallons (located in Arcata)
Assortment of BUTTERWORTH TF375M press pumps, 6K operating flow rate, 28.6 gpm
to 43 gpm, 75-150 hp (located in Crescent City, sold by photo in Arcata)
Truck Dumps-Scales
PEERLESS 253 semi-portable truck trailer dumper, 34’x10’ platform, 4-1/2 min cycle time,
30 hp/220 gallon hydraulic unit, (2) 4-stage 360” stroke telescopic cylinders, 70° tilt
angle, s/n: T771958 (located in Arcata)
PEERLESS 254 semi-portable truck trailer dumper, 34’x10’, 50 hp/220 gallon hydraulic
unit, (2) 4-stage 360” stroke telescopic cylinders, 63° tilt angle, s/n: 712949 (located in
Arcata)
FAIRBANKS 11-4304 load cell type truck scale, 60 tons x 20 lbs, 10’x70’ concrete deck,
35 ton sectional capacity, digital readout, printer, scale house (located in Arcata)

NO MINIMUMS - NO RESERVES
Electrical (all electrical located and sold at Arcata)
WESTINGHOUSE 2000 kva transformer, 2400Y/1386 volt, s/n: SBT8226-
01041
(4) WESTINGHOUSE 1500 kva transformers, 12,000 & 12,470 to
480Y/277 volt, s/n: PAL4348-0101, 4347-0101, 4346-0101 & 4350-
0103
(4) WESTINGHOUSE 1000 kva transformers, 12,000 to 480Y/277 volt,
s/n: PAL-4358-0101, PAL-4350-0101, PAL-4351-0101 & PAL-4349-
0102
WESTINGHOUSE 750 kva transformer, 12,000 to 480Y/277 volt, s/n:
PAL-4358-0101
OHIO TRANSFORMER CO. 3000 kva transformer, 12,000/2400 volt, s/n:
746002779
GE 1500 kva transformer, 12,470 to 480Y/277 volt, s/n: 0507005-T0L
MARKU 150 kva transformer, 480 to 120/208 volt
Assorted transformers to 75 kva, single & 3-phase
WESTINGHOUSE 5-section main disconnect
GE 12-section MCC w/(70) switches
GE 12-section MCC w/(42) switches
GE 8-section MCC w/(23) switches
SQUARE D 7-section MCC w/(34) switches
GE 6-section MCC w/(37) switches
GE 8000 line 6-section MCC w/(22) switches
SQUARE D 6, 6-section MCC w/(5) switches
GE 8000 line 5-section MCC w/(23) switches
WESTINGHOUSE 2100 series 3-section MCC w/(20) switches
GE 3-section MCC w/(19) switches
WESTINGHOUSE ADVANTAGE 3-section MCC w/(16) switches
GE 8000 line 3-section MCC w/(14) switches
GE 3-section MCC w/(7) switches
WESTINGHOUSE 2100 series 2-section MCC w/(10) switches
CH EATON 2-section MCC w/(9) switches
CH UNITROL 2-section MCC w/(8) switches
CH EATON 2-section MCC w/(7) switches
WESTINGHOUSE ADVANTAGE 2-section MCC w/(5) switches
WESTINGHOUSE 1-section MCC w/(4) switches
GE LIMITAMP 2000 hp/2300 volt/445 amp starter
ABB 400 hp static reduced voltage starter
ASE size 6 static reduced voltage starter
HITACHI HFC-VWA 300 hp solid state starter
(3) CH EATON 300 hp solid state starters
IES/GE 250 hp static reduced voltage starter
(7) IES/ASEA size 5 starters
(2) IES/ASEA 150 hp starters
(3) GE CR306GO 125 hp & 150 hp starters
(3) CH EATON 125 hp soft starts
IES/SAFTRONICS DC6 40 hp solid state starter
(30) 5 hp-75 hp FUJI AF300G11 adjustable frequency drives
(15) EATON DYNAMIC adjustable frequency drives
(2) SAFTRONICS series 10 adjustable frequency drives
(13) HITACHI J300 adjustable frequency drives
Breakers, disconnects, lighting panels, stores
(400±) Installed motors & spares to 2000 hp
Large wire & conduit lot w/over 10,000 connected HP
Miscellaneous Equipment-Tools-Supplies (located and sold at
Arcata)
AMERICAN PACEMAKER 18”x96” lathe; BROWNE & SHARP #2 vertical
mill; WYSONG B-48 offset rolls; metal bandsaw; shop press; No.
5 arbor press; drill presses; double end grinders; 34” shop wrights
bandsaw; 2-hand shears; (3) table saws; (2) radial arm saws; belt
sander; planer; PACIFIC ENGINEERING PRODUCTS 300 psi
portable high pressure pump; BLUE GIANT 4’x8’ scissor lift w/gravity
rolls; AGOR water recovery system; CONVAULT 1000 gallon concrete
fuel tank; 8’x20’ storage container; welders; (5) 165 gallon oil tanks;
(3) self-dumping hoppers; 4’x8’ cutting table; 1”x48”x60”, 1”x60”x120”
& 1/2”x60”x120” steel tables; SURETY SURE STRONG tri-pod w/unihoist;
(2) air source carts; large quantity of respirators & filters; pocket
masks; valve locks; signage; safety harnesses; (4) SIGNODE VT16
plastic banders; (2) SIGNODE strap dispensers; (15) rolls of plastic
banding; (2) SCI ASC source carts; oxy-acetylene set; SNAP-ON
valve refacer; (20±) bolt bins; PRECISION measuring equipment; (3)
hose reels w/guns; (2) wheel type fire extinguishers; SHEL LAB SL09
oven; chip oven; large quantity of bearings & cylinders; belting; spare
motors; nuts & bolts; couplers; wire; intercoms; PORTA POWER air
bander; numerous ladders; portable pumps; flammables cabinet;
rolling stairs; barrel cart; metal lockers; 800 lb drum dolly; barrel
type dust collectors; pallet jacks; carts; CLIMAX keymill; TOLEDO
700 portable threader; GREENLEE 777 bender; air drives & tools;
wrenches; sockets; clamps; pullers; tooling; (2) anvils; large wire &
conduit lot
Bid live or bid online with MurphyLIVE!

NO MINIMUMS - NO RESERVES
Rolling Stock
CAT 950G rubber tire loader w/9’ chip bucket, CAT diesel engine, 23.5-25
tires, s/n: 2JS01031
CAT 950E rubber tire loader w/9’ chip bucket, CAT diesel engine, 23.5-25
tires, s/n: 22Z03665
CAT 936E rubber tire loader w/8’ chip bucket, CAT 3304 diesel engine,
20.5-20 tires, 32,120 hrs, s/n: 45Z05909
1997 HYSTER 360XL forklift, 36,000 lb capacity, diesel, 183” 2-stage 8’
wide mast, side shift, 72” forks, dual pneumatic tires, 9727 hrs, s/n:
D019D02299U
(2) HYSTER H180 forklifts, 18,000 lb capacity, diesel, 212” 2-stage mast,
side shift, 60” forks, dual pneumatic tires, s/n’s: B7P814U, n/a
HYSTER S150A forklift, 15,000 lb capacity, propane, 241” 2-stage wide
mast, side shift, 60” forks, solid tires, s/n: A24D2208R
CAT V130 forklift, 13,000 lb capacity, diesel, 218” 2-stage mast, side shift,
60” forks, dual pneumatic tires, 1699 hrs, s/n: 59W00465
HYSTER S100XL forklift, 10,000 lb capacity, propane, 219” 3-stage mast,
side shift, 48” forks, solid tires, 6484 hrs, s/n: D004D02038T
(4) HYSTER S80XLBCS forklifts, 8000 lb capacity, propane, 202-1/2”
3-stage mast, side shift, 48” forks, solid tires, s/n: D004D05951, 4302
hrs; s/n: D004D02284J, 9373 hrs; s/n: D004D02282J, 2693 hrs; s/n:
D004D01818J, 6603 hrs
(2) HYSTER S80XM forklifts, 8000 lb capacity, propane, 145” 2-stage
mast, side shift, 48” forks, solid tires, s/n’s: F00V02048B; F00V02464B
(3) HYSTER S80XL forklifts, 8000 lb capacity, propane, 218” 3-stage
mast, side shift, 48” forks, solid tires, s/n: D004D08716X, 2609 hrs;
s/n: D004V08405R, 1432 hrs; s/n: D004V02564K, 4471 hrs
HYSTER forklift, approx 8000 lb capacity, propane, approx 180” 2-stage
mast, 48” forks, solid tires
CAT TD80 forklift, 8000 lb capacity, propane, 170” 2-stage mast, side
shift, 48” forks, solid tires, s/n: 5KB01761
HYSTER forklift, 7000 lb capacity, propane, approx 170” 2-stage mast,
48” forks, solid tires, 6678 hrs
HYSTER S70E forklift, 7000 lb capacity, propane, 3-stage mast, solid
tires, s/n: C004D04248Z
HYSTER S60B forklift, 6000 lb capacity, propane, 122” 2-stage mast, 48”
forks, solid tires, 4864 hrs, s/n: B004D03172R
BOBCAT 853 skid steer loader w/6’ bucket, diesel, s/n: 510250330
TENNANT 385 sweeper, propane, s/n: 6334
INGERSOLL RAND 375 portable compressor, DEUTZ 111 hp diesel
engine
JLG 45A aerial platform, 45’ reach, 500 lb capacity, s/n: 030003456
JLG 40HAE aerial platform, 40’ reach, 500 lb capacity, 25° gradability, s/n:
0800017429
1989 GERLINGER 30,000 lb capacity lumber carrier, 114” wide between
arms, gas engine (located in Crescent City, sold by photo in
Arcata)
ROSS lumber carrier, gas engine, 108” between arms (located in
Crescent City, sold by photo in Arcata)
TINK 8’ chip bucket; forklift forks; tires; self-dumping hoppers; forklift parts
Additional photos & information on our website:
murphyauction.com
James G. Murphy Co.
Commercial & Industrial Auctioneers
murphyauction.com
425.486.1246 or 800.426.3008
TERMS & CONDITIONS
An On-Site Buyers Premium of 10% will be charged on all successful bids.
An Online Buyers Premium of 13% will be charged on all successful bids.
PAYMENT: Full payment must be made by no later than 4pm, Friday, July 27.
A 25% deposit is required by the close of business, auction day.
Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or
company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction unless otherwise
announced by the auctioneer. Removal schedule announced on auction
day.
Announcements made by the auctioneer at the time of sale take precedence
over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a
separate and/or aggregate basis.
Due to safety & insurance reasons, persons under 12 not admitted.
DRIVER DIRECTIONS
Humboldt Flakeboard Panels, Inc.: From Hwy 101 take Exit 716A (Hwy
299) to exit 1. Turn right at stop sign, go to West End Road, turn
right to sale site 1/2 mile on the left. Follow signs to office.
Hambro Forest Products, Inc.: In Crescent City, turn East on Elk Valley
Road approx. 1/2 mile to sale site on right. Please check in at guard
shack (registration for auction and all items for sale at this location
will be held at the Arcata location)
WATCH FOR AUCTION SIGNS
Lodging Arcata, CA
Best Western Arcata Inn 707-826-0313
Hampton Inn & Suites 707-822-5896
Howard Johnson Express 707-826-9660
Quality Inn 707-822-0409
Lodging Eureka, CA
Best Western Humboldt Bay Inn 707-443-2234
Best Western Plus Bayshore Inn 707-268-8005
Holiday Inn Express 707-440-9075
Quality Inn 707-443-1601
Red Lion Hotel 707-445-0844
Airports
1970 2010
Arcata/Eureka Airport – Serving United Airlines
Rogue Valley International/Medford Airport – Serving Horizon Air, United
Express, Sky West, and Allegiant Air
FOOD SERVICE AVAILABLE AT THE AUCTION SITE

Public Auction Thursday, July 26, 2012
James G. Murphy Co.
Commercial & Industrial Auctioneers
P.O. Box 82160, Kenmore, WA 98028
Triple Pass Dryers
James G. Murphy Co.
Commercial & Industrial Auctioneers
PUBLIC AUCTION
Humboldt Flakeboard Panels, Inc
Hambro Forest Products, Inc
Particleboard Equipment, Rolling Stock
4700 West End Road, Arcata, CA 95521
Bid live or bid online with MurphyLIVE!
PRESORTED
FIRST CLASS MAIL
U.S. POSTAGE
PAID
SEATTLE, WA
PERMIT NO. 963
Thursday, July 26, 2012 • 9am