Etude Medley User Manual.pdf - Invacare UK

Wiring Etude Duo
In order to prevent the cables from being torn apart when activating the motors, it is critical that you
follow the instructions below:
1) Connect the cable of the bed end motor (head) directly to the control unit and the bed end motor (foot) cable
through the backrest motor support and into the control unit.
Only 4-sectioned beds: The plug of the thigh motor must be directed through the backrest motor support
into the control unit.
2) Connect the mains cord to the 230V socket outlet.
3) Run the bed end motors to their top position.
4) Place the motor cable of the foot end on the hook at the foot end.
5) Run the backrest to its top position.
6) Place the bed end motor (head) cables on the hooks at the head end.
7) Fasten the locking cam to the control unit.
When working with the foot end, note that there is a risk of getting squeezed since the adjustable leg section is not
firmly locked. Remember to remove the plug from the socket outlet when moving the bed.
Opening at the backrest motor support. Wiring of the bed end motor (foot).
Wiring of the bed end motor (head).
8