KRAMER Catalog.pdf - Musicworld.bg

WP-28
WAP-1
WP-4iR
European version
USA version
European version
USA version
European version
USA version
ROOM CONNECTIVITY ► WALL PLATES ► ACTIVE WALL PLATES
■
Wall Plate Size - European version - 2 Gang.
USA version - 3 Gang.
ACTIVE WALL PLATE - COMPOSITE, S-VIDEO, COMPONENT
VIDEO & AUDIO RECEIVER
The WP-28 is a twisted pair receiver for composite video, s-Video,
or component video and unbalanced stereo or S/PDIF audio signals.
It converts a twisted pair signal from the WP-27 back into the
original audio and video formats.
■
■
■
■
■
Video Switching - Between either CV or s-Video (Y/C) and component
video.
Level (Gain) & EQ (Peaking) Controls Power Connect System - Only
one unit in a system, either the transmitter or the receiver needs to
be connected to a power source.
System Range - Up to 100m (320ft).
Cable - UTP (unshielded twisted pair) such as CAT 5.
Wall Plate Size - European version - 2 Gang.
USA version - 3 Gang.
ACTIVE WALL PLATE - POWER AMPLIFIER WITH 2X1
SWITCHING
The WAP-1 is a high-performance power amplifier for line level
unbalanced stereo audio signals. It delivers a speaker output of 9W
RMS per channel into a 4Ω load.
■
■
■
■
Front Panel Connections - Dual 3.5mm inputs for inputs 1 and 2.
Rear Panel Connections - Terminal blocks for secondary input (input 1)
and terminal blocks for two speakers outputs.
Control - Level (volume).
Wall Plate - 2 Gang.
ACTIVE WALL PLATE - INFRARED REPEATER
The WP-4iR is an infrared signal repeater that can operate at
distances up to 75m. This model extends infrared signals into areas
where there is no direct line-of-sight for normal infrared signal
operation.
■
■
■
Outputs - Up to 4 signals can be distributed to IR receivers.
Optional IR Emitter Cables - C-A35/IRE-10' single emitter (1 included)
& C-A35/2IRE-10' dual emitter (Not included).
Wall Plate - 1 Gang.
KRAMER ELECTRONICS, Ltd
DIRECTORY OF PRODUCTS 2009/2010
WWW.KRAMERELECTRONICS.COM
9.33