JBL Osmose 120(0.21MB)

Art.No. 9702910
JBL Osmose 120
Unit for the preparation
of tap water
Your specialist JBL retailer
• For ideal water quality
• High capacity
• Simple to use
• Long service life
• For freshwater and saltwater
JBL Online Laboratory
Safe and fast analysis of
water values.
• Free
• No registration required
• No log-in
• 24 hour
• Simple
www.JBL.de
www.JBL.de
Tap water
too hard?
Or too much phosphate, nitrate, other pollutants?
With JBL´s water preparation unit,
Osmosis 120, you are always in
control of the quality of your
tap water.
Osmosis 120 removes all traces of
hardness, additives and pollutants
from tap water.
For the perfect care of even the most
sensitive animals in freshwater or
saltwater.
www.JBL.de

For top-quality water in your
aquarium – Osmosis 120
With JBL´s water preparation unit, Osmosis 120, you
create the conditions for the perfect care of even
the most sensitive aquarium inhabitants.
Irrespective of the quality of the water
which comes out of your tap, the JBL
Osmosis 120 unit uses reverse
osmosis to produce laboratoryquality
water. In addition to hardness, practically all
the substances which damage the quality of the
water or promote the growth of algae are
removed from the tap water. Suitable for use
with freshwater and saltwater.
Total hardness 95%
Carbonate hardness 95%
With JBL Osmosis 120 the following retention
rates can be achieved:
Phosphate 96%
Nitrate 90%
Chlorine (carbon pre-filter) 100%
Pesticides 98%
Herbicides 98 %
Purest osmosis water
Carbon pre-filter
removes
pesticides,
herbicides and
chlorine which
is damaging the
membrane
Water connection
to the tap
A
PreCarbon
JBL Osmosis 120 – unit for the preparation of
tap water with carbon and fine filters
• Ready for use with 3/4" water connection
• Produces laboratory-quality osmosis water
• High capacity with up to 120 liters in 24 hours at 20° C
• With precision flow regulator
Osmose 120
Osmosis filter
removes total
hardness,
carbonate hardness,
nitrates
and phosphates
B C
Purest osmosis
water
PreSediment
Sediment
pre-filter
removes floatingandmicroparticles
which
are damaging the
membrane.
Waste water with
pollutants
Simple to use! Here's how:
1. Connect hose A to the tap
2. Slowly turn on the water.
The water pressure of the tap (3-6 bar)
is sufficient to operate the unit.
3. Hose B now supplies the purest osmosis water.
4. Polluted water flows out of hose C
.
JBL AquaDur plus
Precise doses of this table
salt-free osmosis salt add
the ideal amount of minerals
to the osmosis water.