Specialty Locks & Trims

7/30/07 © SARGENT Manufacturing Company 2006, 2007 All rights reserved
10 Line Lever Lock
Prefixes & Strikes
Prefix Designation and Description
1 Adapter plates for 1-3/8" thick doors
10▲ SARGENT Signature key system
11▲ SARGENT XC feature (not available w/10, 22, 30, 60, 63, 64,
KESO, SC, SE, VA, VS prefixes)
20 2-3/8" Backset Latch with 1" Front
21▲ SARGENT Construction key system (lost ball)
Standard on new systems est. since 5/1/96
22▲ SARGENT Construction key system (split key)
For pre-established key systems only
23 3-3/4" backset
25 5" backset
28 Strike #808. Lip length 1-1/4"
Lip lengths 1-5/8" to 2-7/8" in 1/4" increments only
30▲ 10 Line lever to accept Schlage cylinder - no cylinder provided
36 6 lobe security head screws
37 Spanner head screws
41 3/4" latch throw
60▲ SARGENT Removable construction core
63▲ SARGENT Removable core cylinder
64▲ SARGENT Removable construction core cylinder
65-73▲ Small format 6-pin uncombinated core (G,L,B,P,Y levers only)
65-73-7P▲ Small format 7-pin uncombinated core (G,L,B,P,Y levers only)
70▲ Small format interchangeable disposable plastic construction
core (G,L,B,P,Y levers only)
72▲ Small format interchangeable 6-pin construction core
(G,L,B,P,Y levers only)
73▲ Small format interchangeable core, 6-pin (G,L,B,P,Y levers only)
73-7P▲ Small format interchangeable core, 7-pin (G,L,B,P,Y levers only)
74 Lead lined (Specify components inside, outside and/or latch tube)
75 Handicap warning milled on backside of inside lever
76 Handicap warning milled on backside of outside lever
77 Handicap warning milled on backside of both levers
80 Levers to accept KESO and Keso F1 cylinders –
no cylinders provided
82▲ SARGENT KESO security cylinder (G,L,B,P,Y levers only)
F1-82 SARGENT KESO Security Cylinder – patented – new key systems
BR Bump Resistant Cylinder (Available with Conventional &
XC Cylinders Only)
FW Freewheeling locking levers (G,L,B,P,Y levers only)
RX* Request to exit - Monitors inside lever rotation
SC▲ Schlage C keyway cylinder, 0 bitted
SE▲ Schlage E keyway cylinder, 0 bitted
SF**▲ L Lever to accept Medeco KeyMark Large Format
Interchangeable and Schlage Full Size Interchangeable Core
SG MicroShield – an antimicrobial powder coat
VA▲ SARGENT V-10 standard cylinder
VS▲ SARGENT V-10 standard un-assembled cylinder
▲ Prefixes not available for 50 function
* Available with functions: 04, 05, 15, 37, 70 & 71
** Supplied Less Cylinder, but with tailpiece needed
6
1-800-727-5477 • www.sargentlock.com
Strikes
• Finishes: 03, 04, 09, 10, 10B, 10BL, 15, 20D, 32D
2-3/4" Curved Lip Strike – Standard
2-3⁄4"
(70mm)
1⁄16"
(2mm)
1-1⁄8"
(29mm)
1-1⁄4"
(32mm)
1-1⁄2"
(38mm)
• Furnished standard with 1-1/4" (32mm)
curved lip from center of strike screw
holes to end of lip
• Lip lengths 7/8" (22mm), 1" (25mm),
1-1/4" (32mm) standard, 1-1/2" (38mm),
1-3/4" (44mm) and 2" (51mm)
• To order strike separately, specify
800 strike x finish x lip length
4-7/8" Curved Lip Strike: (28-Prefix)
1⁄16"
(2mm)
4-7⁄8"
(124mm)
1-1⁄4"
(32mm)
1-1⁄4"
(32mm)
5/16" (8mm)
radius
3/8" (10mm)
start of radius
3-3⁄8"
(85mm)
5/16" (8mm)
radius
3/8" (10mm)
start of radius
• Conforms to ANSI standard
• Furnished standard with curved lip 1-1/4"
(32mm) from center of strike screw holes
to end of lip
• Lip lengths 7/8" (22mm), 1-1/8" (29mm),
1-1/4" (32mm), 1-3/8" (35mm),
1-5/8" (42mm), 1-7/8" (48mm),
2-1/8" (54mm), 2-3/8" (60mm),
2-5/8" (66mm), 2-7/8" (73mm)
• To order strike separately, specify
808 strike x finish x lip length