STRIX P75 Low Profile Cordless Connector - STRIX Limited
STRIX P75 Low Profile Cordless Connector - STRIX Limited
STRIX P75 Low Profile Cordless Connector - STRIX Limited
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>STRIX</strong> <strong>P75</strong> <strong>Low</strong> <strong>Profile</strong> <strong>Cordless</strong> <strong>Connector</strong><br />
Overview:<br />
The <strong>STRIX</strong> <strong>P75</strong> is a low profile cordless interface system. The contact housing is designed<br />
to sit in the power base. The adaptor is mounted remotely in the appliance.<br />
Features/Benefits:<br />
• Aesthetic design with low profile installation<br />
• <strong>Low</strong> upthrust forces allow low mass appliance design<br />
Functional Description:<br />
This interface consists of a male contact housing and female adaptor which are both<br />
elliptical in shape. The leading edges of both components are designed to allow them to align<br />
prior to electrical connections being made. The adaptor consists of a flame retardant<br />
moulding containing three pins. All three pins terminate in the upper surface of the adaptor<br />
with male tabs (4.8 x 0.5mm). The adaptor pins pass through shutter slots in the contact<br />
housing and connect with silver contacted leaf springs. All three high quality conductors<br />
terminate in a male tab (4.8 x 0.5mm) at the base of the contact housing. The contact<br />
housing has been specifically designed to prevent ingress of water; however special<br />
drainage paths ensure creepage and clearance paths cannot be bridged.
Installation:<br />
Both the adaptor and contact housing are designed to be held positively<br />
between the upper and lower parts of the appliance base and power<br />
base respectively. Prior to assembly of either the adaptor or contact<br />
housing care must be taken to ensure the connecting leads are not under<br />
strain or trapped by any part of the appliance.<br />
Technical Specification<br />
Electrical Rating:<br />
VOLTAGE: 220-240V RMS @ 50Hz: or 110-120V RMS @ 60Hz<br />
CURRENT: 13amps @ 240V RMS 13amps @ 120V RMS<br />
Design Criteria:<br />
• Designed for incorporation in Class 1 appliances<br />
• Designed to exceed all safety and endurance requirements of International and<br />
National Safety Standards<br />
Material:<br />
Control Body - high temp flame retardant polymer (to U.L. 94-V1)<br />
Certification:<br />
Tested to EN60335-2-15 by B.E.A.B., U.L. recognised to UL1977 and C.S.A. certified.<br />
<strong>Connector</strong>s:<br />
Quick connect receptacle tabs - female 4.8 x 0.5mm to IEC 760
Strix Ltd. Site Copyright Notice 2012<br />
Permission to use, copy and distribute the documentation published by <strong>STRIX</strong> LTD on this World Wide Web<br />
server is hereby granted on the condition that each copy contains the copyright notice in its entirety and that<br />
no part of the documentation is used for commercial purposes but restricted to use for information purposes<br />
within an organisation.<br />
All information published on this World Wide Web server is provided as is without any representation or<br />
warranty of any kind either expressed or implied including but not limited to implied warranties for<br />
merchantability, fitness for a particular purpose on non-infringement. Any <strong>STRIX</strong> LTD documentation may<br />
include technical inaccuracies or typographical errors. Changes and additions may be made by <strong>STRIX</strong> LTD from<br />
time to time to any information contained herein.<br />
<strong>STRIX</strong> and <strong>STRIX</strong> Owl logo are registered trademarks of the <strong>STRIX</strong> Group of Companies around the world.<br />
<strong>STRIX</strong> Group <strong>Limited</strong> • Forrest House • Ronaldsway • Isle Of Man • IM9 2RG • British Isles • Tel: +44 (0)1624 829829
Change language