English - Techwebasto.com
English - Techwebasto.com
English - Techwebasto.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WEBASTO SCHOLASTIC SERIES 5 INSTALLATION<br />
5.7 Fuel System<br />
5.7.1 General Description<br />
The fuel is drawn from the vehicles fuel tank through a fuel standpipe. This standpipe can be utilized on vehicles with<br />
a threaded port in the fuel tank for this purpose.<br />
IMPORTANT! Keep the fuel standpipe 50 mm (2”) from bottom of the fuel tank.<br />
5.7.2 Fuel Supply<br />
Fig. 5-7: Fuel Standpipe Installation<br />
The fuel standpipe and fuel line must be installed according to these instructions to ensure proper heater operation.<br />
1. Cut or extend universal fuel standpipe to length, approx. 50 mm (2”) off fuel tank bottom. Slash cut standpipe<br />
end on a 45° angle to help prevent clogging.<br />
NOTE:<br />
After fuel standpipe has been cut to length, remove all burrs from cut inlet end. Check valve directional indication<br />
mark (arrow or symbol) must point in direction of fuel source (fuel tank).<br />
5-7
Change language