Untitled - Tii Network Technologies

CONNECTIVITY PRODUCTS
WIRE TERMINALS
65E-10 – 10-Pair IDC Connector Block
Based on the gel and IDC technologies that have made sealed connections the industry
standard in Network Interface products, with over 400 million rockers in service around
the world, the 10 PAIR IDC block adds a new level of simplicity and efficiency to crossconnect
functions. Tool-less, Gel-Sealed IDC’s terminate and lock 22-26 AWG conductors
and seal the connection against corrosion. The block uses existing Krone type test tools
thereby eliminating the need to re-equip the workforce.
ORDERING INFORMATION
Model No. Description
65E-10 10 Pair Cross Connect Block
DVC-4 Series – Four Line Digital Voice Connector
The DVC-4, four line digital voice connector, distributes EMTA connections to customer’s
telephone lines through sealed IDC rocker assemblies. The module comes equipped with an
RJ-31X jack that provides a series connection to the tip and ring conductors of line one on the
DVC-4. The jack is wired ahead of all station equipment electrically and is typically used with
registered alarm-reporting devices. When an alarm condition occurs, the RJ-31X functions to
cut off all station equipment wired into the home or business.
ORDERING INFORMATION
Model No. Description
DVC-4 Four Line Digital Voice Connector
DVC-4-X Four Line Digital Voice Connector without RJ-31X
160 Series – Wire Terminal Enclosure
The 160G Indoor/Outdoor Wire Terminal Enclosure shields one or two Tii Total Failsafe® (TFS®)
Protector Modules or other electronic devices from most environmental conditions. It has a
mounting base, a flexible grommet and a fitted flange cover that snaps tightly closed.
ORDERING INFORMATION
Model No. Description
160G Indoor/Outdoor Enclosure with Grommet
160GS Indoor/Outdoor Enclosure with Grommet and Ground Stud
8 www.tiinetworktechnologies.com Tel: 888.844.4720 Rev. 8/11