2012 - Apacer

Features:
Standard PCI Express bus interface
– PCI Express 2.0*
– 5.0 Gbps maximum transfer rate
Operating systems support
– Windows 7
– Windows Vista
– Windows XP
– Linux**
Capacity
– 12, 25, 50, 100 GB
Performance***
– Sustain Read Speed up to 350 MB/s
– Sustain Write Speed up to 175 MB/s
– Random Read: 6100 IOPS
– Random Write: 1600 IOPS
Flash management design
– On-chip wear leveling algorithms
– Built-in ECC engine
NAND Flash: SLC
PCI-Express SSD
AP-PxxxxXXX-XXX
Integrated Power Management
Temperature ranges
– 0 to 70°C for operating temperature
– -40°C to 85°C for storage temperature
Supply voltage
– 3.3 V +/- 5%
Power consumption***
– Active mode: 440 mA
– Idle mode: 240 mA
Form Factor
– Mini PCI Express
RoHS compliant
Supports synchronous flash interface
Supports AHCI programming interface
and NVMHCI (Non-volatile Memory Host
Controller Interface)
Connector type
– PCI Express bus x1 lane
*The mPDM is not completely backward compatible. Operational instability or inefficiency may occur if this device is applied on a
PCIe 1.0 socket.
**Since Linux is an open system that comes in various user-developed versions, conflicts may occur regarding compatibility
between the device driver and the OS version.
***The performance and power consumption values addressed here are typical and may vary from platforms.
1
© 2012 Apacer Technology Inc. Rev. 1.0