Hotsy 1200 97-6268 0608 - ETS Company Pressure Washers and ...
Hotsy 1200 97-6268 0608 - ETS Company Pressure Washers and ...
Hotsy 1200 97-6268 0608 - ETS Company Pressure Washers and ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
unpacking<br />
Unpack carefully. Wear safety glasses or goggles while<br />
unpacking, assembling, or operating pressure washer.<br />
If there are missing components or hidden damage,<br />
immediately contact carrier concerning discrepancies.<br />
parts included<br />
• <strong>Pressure</strong> Washer<br />
• <strong>Pressure</strong> Hose<br />
• <strong>Pressure</strong> Nozzles (3 Ea.)<br />
• W<strong>and</strong><br />
• Trigger Gun<br />
• Operations Manual<br />
• Gasoline Engine Manual<br />
pressure hose, trigger Gun <strong>and</strong> w<strong>and</strong><br />
1. Install the pressure hose on the pressure washer as<br />
shown in figure 3.<br />
thermal<br />
rupture disk<br />
coil<br />
discharge<br />
block<br />
assembly instructions<br />
outlet<br />
nipple<br />
Figure 3 - <strong>Pressure</strong> Hose Installation<br />
hose Quick<br />
disconnect<br />
NOTE: The pressure nozzle is not to be installed at<br />
this time.<br />
<strong>97</strong>-<strong>6268</strong> • HOTSY <strong>1200</strong> • REV. 8/06<br />
2. Assemble w<strong>and</strong> components as shown in figure 4.<br />
spray Gun<br />
high<br />
pressure<br />
hose<br />
w<strong>and</strong><br />
Figure 4 - Trigger Gun/W<strong>and</strong> Assembly<br />
3. Make sure all connections are secure.<br />
high<br />
pressure<br />
nozzle<br />
PRESSURE WASHER OPERATOR’S MANUAL<br />
7