Laddomat Brochure - Euroheat

Termoventiler AB
SE-523 93 Marbäck
Laddomat Flue thermostat
To start and stop the charge pump in Laddomat 10, 21,
21-60, 21-100, or 11-30.
The fl ue thermostat starts the pump as soon as the
temperature of the fl ue rises to a predetermined level,
after fi ring starts. In Laddomat 21 the pump fl ow closes
the self-circulation valve with the tank. Hot water from
the boiler top is pumped directly into the boiler bottom
= the boiler quickly becomes hot.
Thermomatic K
Thermomatic K (TMK) is a constant regulator for controlling a turning
mixing valve with a 90 degree opening angle.
TMK can be used for constant maintenance of both cooling and
heating.
Minimum time between fully open and closed positions is 120 seconds.
TMK is suitable for all installations with constant fl ow such as radiator
and underfl oor heating circuits, charging of accumulator tanks etc. This
version is not suitable for domestic hot water control.
The temperature scale is 10–80°C.
Tel. +46 (0)321 – 261 80
Fax +46 (0)321 – 261 89
www.termoventiler.se
When the wood fi re goes out, the pump stops as soon as
the fl ue cools down. In Laddomat 21 the self-circulation
valve opens so that cooled water from the tank bottom can
transfer residual heat in the boiler to the tank top.
When Laddomat 10 is used a water thermostat should be
installed in parallel with the fl ue thermostat. This is as extra
security if the boiler should boil due to too large a bed of
embers.
Thermomatic K used for cooling a boiler
Thermomatic K used for cooling a boiler when the
distance between boiler and tank is big.
Thermomatic K also used for keeping a constant
tempetature for underfl oor heating.
Sales agent: