VP 1000-64 Vapour-Phase Soldering System

VP 1000-64
Vapour-Phase Soldering System
Technical data
max. solder product format
max. height of solder product
Energy supply (V) 3+N+PE
Power drawn
Average power consumption with full load
Average power consumption at standby
Compressed oiled air
Medium consumption ca.
Medium basic filling quantity
Heating-up time
Aspiration power
Cooling water inflow
Cooling water reflow
Cooling water pressure
Cooling water (during operation with fresh water)
Option:
Cooling water/cooling system with compressor
additional connection power
VP 1000-64
600 x 400 mm
100 mm
400 V / 50 Hz
8,5 kW
3,5 kWh
2,0 kWh
6 bar oil free
10 - 15 g/h
25 kg
30 min
200 m³/h
1 x tube ½”
1 x tube ½”
2 – 4 bar
10 – 18 °C
2 KW
1

Dimensions and weight
Length A
Width B (Basic model + loading station)
Height C (at 935 mm load/unloading height;
without signal mast)
Load and unloading height (SMEMA)
Aspiration diameter
1.806 mm
1.519 mm
1.420 mm
866 till 935 (depends on adjustment of mounting foot)
100 mm
Power- and consumption values are based on measurements of ASSCON Standard Soldering Systems and on
normal operational conditions. In particular consumption of reflow fluid depends on i.a. products use and respectively
customer-specific production requirement. Therefore in individual cases variations of power- and consumption
values like mentioned above can arise.
Dimension Sheet
C
TD E VP1000-64-1 11.2007
A
B
2