Løftekløer Lifting Clamps - CERTEX

Other
Lifting
Løftekløer
90
IP for horisontal løft
- Kan anvendes til at løfte stålemner med en overfladehårdhed op til 345 Brinell
(345 Rc).
- Kan anvendes ved temperaturer mellem -40° til +100° C
- Større WLL og andre kloåbninger fås på efterpørgsel.
- Læs altid den medfølgende manual før ibrugtagning af
løftekloen.
IPHTONZ
IPHOZ
IPBC
IPHGZ
Art. No Model WLL per pair in t Jaw in mm Weight kg
04-1042701 0,75-IPHTONZ 0,75 0-30 4,0
04-1042702 1,5-IPHTONZ 1,5 0-60 9,0
04-1042703 3-IPHTONZ 3,0 0-60 14,0
04-1042704 4,5-IPHTONZ 4,5 0-60 20,0
04-1042706 6-IPHTONZ 6,0 0-60 25,0
Art. No Model WLL per pair in t Jaw in mm Weight kg
04-1042601 0,75-IPHOZ 0,75 0-30 6,0
04-1042602 1,5-IPHOZ 1,5 0-45 11,0
04-1042603 3-IPHOZ 3,0 0-45 16,0
04-1042604 4,5-IPHOZ 4,5 0-45 17,0
04-1042606 6-IPHOZ 6,0 0-60 31,0
04-1042609 9-IPHOZ 9,0 0-60 41,0
04-1042612 12-IPHOZ 12,0 0-60 76,0
04-1042615 15-IPHOZ 15,0 0-60 76,0
Art. No Model WLL per pce in t Jaw in mm Weight kg
04-1042101 1-IPBC 1,0 0-20 3,5
04-1042102 2-IPBC 2,0 0-25 6,5
04-1042103 3-IPBC 3,0 0-25 8,5
Art. No Model WLL per pce in t Jaw in mm Weight kg
04-1042201 0,75-IPHGZ 0,75 0-25 4,0
04-1042202 1,5-IPHGZ 1,5 0-25 7,3
04-1042203 3-IPHGZ 3,0 0-40 12,3
04-1042204 4,5-IPHGZ 4,5 0-40 25,0
IPHGUZ
Der tages forbehold for trykfejl og udgåede varer
C E R T E X F O R C E R T A I N T Y
IP for Horizontal Lifting
Art. No Model WLL per pce in t Jaw in mm Weight kg
04-1042302 1,5-IPHGUZ 1,5 0-25 9,0
VOJENS +45 74 54 14 37
HVIDOVRE +45 36 77 40 30
AALBORG +45 98 13 18 88
www.certex.dk
Tilbage / Back
- Can be used to lift classes of steel with a surface hardness of up to 345 Brinell
(345 Rc).
- Can be used at temperatures ranging from -40° C to +100° C;
- Higher Working Load Limits and different jawapertures upon request.
- Before using the clamp always read the instruction
manual supplied with the clamp.