Mikron Respeed Systems

Mikron Respeed Systems
Factory Overhauled Mikron Transfer Machines:
As good as new!

Mikron Respeed Systems
It doesn't always have to be a new one!
Are you on a search for a manufacturing solution with
proven Mikron qualities? But the purchase of a new
machine is not feasible? Mikron Respeed Systems offers
you an alternative which doesn't force you to give up
either our traditional performance features or our comprehensive
service. Our used Mikron Respeed systems are
ready to start a new machining life with you!
Since 2004, Mikron Machining Technology has specialized
in trading in used Mikron transfer machines. The organization
responsible, Mikron Respeed Systems, overhauls and sells
used Mikron transfer machines. These systems offer the
same qualities as new Mikron machines: high productivity,
precision and reliability. You can buy machines straight
from stock ("as-it-is"), inspected or completely overhauled
and retooled according to your requirements.
Mikron Respeed Systems: All advantages at a glance
• Overhauled machines as good as new
• New Mikron guarantee
• Service terms same as for new machinery
• Original Mikron spare parts
• Quick delivery
• Advantageous price
Top „machines,“ which never
lose their speed – like Mikron
Respeed systems!
2

Mikron Respeed Systems
More than just used transfer machines
Used Mikron machines in old condition
A machine for every requirement
Mikron Respeed Systems offers you two different
performance options: Mikron machines with the original
configuration ("as-it-is") or machines reconfigured in
accordance with your production requirements.
Systems in current condition ("as-it-is")
This refers to used Mikron machines, delivered from
stock, which are configured for a specific workpiece. With
minimal adaptation they are almost immediately ready for
production of a new, similar workpiece. There is no
machine for your need in our stock? Not a problem.
Upon request, Mikron Respeed Systems will search for a
used Mikron production system for the production of a
specific workpiece that does meet your requirements.
Thorough reconditioning
3
Partial renovation and adaptation per new
production requirements
Systems per customer-specific configurations
Mikron Respeed Systems will configure to your production
requirements an overhauled Mikron machining system.
Depending on the specific requirements, we will offer you
the right solution:
• Retooled system
• Partially renewed system
• Completely overhauled and renewed system

Test phase
Mikron Service Solutions
Flexible, modular, customer oriented
Our service concept is as modular as the
machine. The optimal service strategy
consists of a mix of condition-oriented,
predictive and reactive services. You
assemble your own custom service package.
Exactly the same as for a new transfer
equipment. Of course we are happy to
advise you.
Your new Respeed system!
Spare Part Service –
for a dependable supply of spare parts
Xchange Service –
to minimize downtime
Product Support –
for the optimum maintenance of your equipment
Business Support –
to guarantee continuous use of your investment
4

Mikron Respeed Systems – The Advantages
Proven Mikron Quality with a Guarantee
Mikron Respeed Systems specializes in overhauling used
Mikron transfer machines and reconditioning to technically
efficient condition.
Depending on the customer's requirements, the machines
undergo the following processes:
• Disassembling of the machine and inspection of all
parts
• Repair or replacement of worn parts with original
Mikron spare parts
• Repainting
• Updating of electrical equipment
• Engineering for reconfiguration, clamping systems,
loading/unloading devices and cutting tools
• Complete assembly and test runs with final acceptance
by the customer
For all of the above, apply Mikron’s strict quality standards.
And there's more: for completely overhauled
machines, Mikron offers the same guarantee terms as for
new machines.
A Mikron Multifactor Respeed, after thorough
overhaul, fit for a new machining life
You will also benefit from other quality advantages
• A tight, worldwide service network: You can count on
our quick and professional support at all times
• Original machinery documentation
• ISO certification – Since 2005, Mikron Machining
Technology has been ISO certified for quality, environment
and safety.
Price / Performance ratio – absolutely superior
The purchase of a Mikron Respeed system is a profitable
investment! The following characteristics will be beneficial
to you
• Typical high Mikron productivity: from 10 to 300
parts/minute (depending on application)
• Attractive purchase price: 30% to 50% lower than for
new machinery
• Extremely economical part costs
• Advantageous delivery times: straight from stock or up
to 8 months, depending on the complexity of the
machine.
5

0811
0306/1000
Mikron Machining
Your contacts
Headquarter
Mikron SA Agno
Via Ginnasio 17
CH-6982 Agno
Tel. +41 91 610 61 11
Fax +41 91 610 66 80
mag@mikron.com
Mikron Tool SA Agno
Via Campagna 1
CH-6984 Bioggio
Tel. +41 91 610 40 00
Fax +41 91 610 40 10
mto@mikron.com
Mikron GmbH Rottweil
Berner Feld 71
D-78628 Rottweil
Tel. +49 741 5380 0
Fax +49 741 5380 580
mro@mikron.com
www.mikron.com
Mikron SAS Nerviano
Via S. Ambrogio 16
I-20015 Parabiago (MI)
Tel. +39 0331 55 12 22
Fax +39 0331 55 12 86
mnv@mikron.com
Mikron Corp. Monroe
200 Main Street
P.O. Box 268
Monroe, CT 06468 / USA
Tel. +1 203 261 31 00
Fax +1 203 268 47 52
mmo@mikron.com
Mikron Taiwan Office
P.O. Box 91-251
Taipei, Taiwan R.O.C.
Tel. +886 2 2231 07 07
Fax +886 2 2231 01 07
mtw@mikron.com
Mikron ® is a trademark of Mikron Holding AG, Biel (Switzerland)