Guitar Amplification

28231_Hayden2011_broVg_Layout 1 01/08/2011 12:20 Page 17
HGT Series
The Hayden HGT-A20/40 amplifiers bring tone and
flexibility to today’s hard working guitarist. Driven
by 3 x ECC83 tubes in the preamp, the amplifiers
feature 3 channels offering huge flexibility whether
at home, rehearsal or in the studio.
The 20 Watt head and combo employ 2 x EL84 tubes in the power section
while the 40 Watt head and combo use the classic combination of 2 x EL34s.
The dedicated clean channel has an independent EQ (Bass & Treble) and
offers lush crystal clean tones through to a warm, bluesy crunch when
driven hard. Channels 2 and 3 have a shared EQ that features Bass,
Middle and Treble, along with a Contour control for quick and easy fine
tuning of your sound. Channels 2 and 3 both have independent Volume
and Gain controls meaning you can switch from a rhythm to boosted lead
tone simply at the click of a switch. Whether it’s huge British crunch or all
the way to American-styled, fully saturated tones, the HGT-A 20 and 40
heads and combos will not disappoint. Channels can be changed via the
push buttons on the front panel or by using the supplied footswitch.
The HGT-A 20/40 amplifiers also feature digital reverb, an FX loop with
level control and 2 recording out sockets that simulate the tone taken from
a mic in front of a 4x12 cabinet – one leaving the amplifier operational and
one which mutes the amplifier’s power amp section for silent recording.
The heads also feature 2 x 8Ω speaker outputs and 1 x 16Ω output to allow
connection to a wide variety of cabinets.
Listen to Hayden amps at www.haydenamps.com
HGT-A20 Combo
• 20 Watt all tube combo
• Features as HGT-A20 Head
• Custom designed Hayden 12" loudspeaker
HGT-A40 Combo
• 40 Watt all tube combo
• Features as HGT-A40 Head
• Custom designed Hayden 12" loudspeaker