STC 800 Dynamic 5-axis machining center

We only judge new technological
solutions by the benefits they bring
you as their user in practice, and
this over the course of many years.
Therefore, we do not rely solely on
revolution but rather on well-targeted
evolution when we develop
new solutions.
Construction principle
- Thermo-symmetrical design
- Elements of closed welded and cast design
- Extremely stable and low vibration
- Optimized using the FE method
- Compact design for complete transport and low space requirement
- Broadly supported rotary table carriage with Gantry drive
- High running and positioning accuracy
- Short positioning and start-up times thanks to high acceleration
Table assembly
- CNC rotary table as fourth simultaneous axis
- Pallet interface with clamping cones
- Concentric, water-cooled direct drive
- High driving torque
- Hydrostatic B axis clamping
- Fast rotating rotary table
Evolution of technology
Axis drives and guides
- Highly dynamic drives with digital control and regulating system
- High feed forces for heavy-duty cutting
- Low-maintenance three-phase servo motors
- Belt drive as pre-stage
- Pretensioned, ground and backlash-free ball screws
- Absolute optical measuring systems on all five axes
- Drives and guides outside of the range of operation
- Large dimensioned, stiff and precise linear guides with
recirculating roller packs
- Pretensioned guide carriages guarantee high machining quality
and long-term accuracy
A axis milling spindle
- Simultaneously controlled fifth CNC axis
- Stable roller bearings on both sides
- High positioning accuracy through a direct optical distance measuring system
- Low-wear worm drive with steel-on-steel elements, coated
- High driving torque
- Hydraulic axis clamping and axis dampening
- Even suitable for heavy-duty cutting