Combine harvester - AGCO GmbH

Combine harvester
L- and E-series

Fendt combine harvester —
innovative, economical and reliable
Fendt offers a wide range of products in the area of harvest machines to suit a variety of
requirements. One of the distinguishing features of the robust Fendt combine harvester
is that it comes with over 130 years of experience and proven technology.
The E-series Fendt combine harvesters are specially designed for the needs of mediumsized
businesses and contractors. It provides a high return of investment as well as reliability
and a solid construction.
The new Fendt L-series models extend the offer of five and six walker models. All L-series
models are also fitted with the Power Feed Roller and the Multi Crop Separator plus.
Therefore combine harvesters of the L-series offer even more flexibility. Higher results
can be achieved even in the most difficult conditions.
2 3
5180 E 176 HP 129 kW
5220 E 226 HP 166 kW
5250 E 243 HP 179 kW
6250 E 243 HP 179 kW
5250 L / 5250 AL 243 HP 179 kW
6270 L 275 HP 202 kW
Contents
Introduction 2 – 3
Cutting unit 4 – 5
Threshing unit 6 – 9
Straw walkers 10 – 11
Cleaning system 12 – 13
Grain tank/Engine 14 – 15
Comfort cabin 16 – 17
Auto Level 18 – 19
Options 20 – 21
518O E – Entry Level Model 22 – 23
Maintenance / Service 24 – 25
Cross section E-series and L-series 26 – 29
Technical details 30 – 31
• Innovative threshing
system with large
cleaning area
• Even crop flow
• Powerful straw walkers
with gentle straw
handling
• Easy-to-adjust HC Sieves
for maximum cleaning
efficiency
• Comfortable cab with
modern operating
elements
• Long service life,
important parts are
galvanised

Very simple: with the multi-coupler, the hydraulic connections for the
cutting table are linked with one action (as standard with the L-series,
optional for the E-series).
The knives are protected by the closed knife fingers. This ensures that there
is no disturbance to the operation in any conditions and that there is always
a clean cut.
The first step to a perfect cut
The FreeFlow cutting table of the Fendt
combine harvester is equipped for the
highest output and is extremely durable.
The widths available are from 4.2 m to 7.6
m. It has a straightforward design and is
bolted together for long life and low
servicing costs.
The reel can reach below the knife level to lift laid crops before cutting.
Perfect work even under difficult conditions.
The efficient cutting table is available with crop lifters as an option.
Cutting table frame
The cutting table is especially strong and reliable
because of the bolted table floor and the
solid frame. The bolted floor plates can easily be
changed. Because it is so robust the various
wearing parts can easily be replaced.
4 5
Cutting knife
With a speed of 1220 strokes per minute and a
cutting speed of 1.73 m per second, a perfect
cut is guaranteed. For a high load-bearing capacity,
the knife fingers are supported from
above and below. Because of the self-cleaning
blades, an optimum cutting quality is achieved,
even in the most difficult harvest conditions.
Auto Level tables control
Auto Level tables adjust automatically to uneven
ground and slopes up to +/- 8%. Allowing
efficient use of the full table width without operator
intervention. Smooth operation is therefore
guaranteed even when using very wide
cutting tables at full capacity.
• FreeFlow cutting table
ensures the highest
throughput
• Solid cutting table frame
with easy-to-replace
wearing parts
• Optimal cutting quality
through double supported
knives
• Table auger is equipped
with fingers over the entire
width
• Simple table mounting
as all hydraulic services
are included in the multicoupler
• Deep-reaching reel for
laid crops
• Auto Level table evens
out unlevel ground

The distance of the front and rear concaves can be easily adjusted electronically
from the cab, independent of each other.
1.threshing drum
2. threshing concave
3. ABC Module
4. beater
Efficient and careful threshing
Large diameter drum give high performance
with an excellent sample and low
grain loss. The cylinder runs quietly with its
high inertia action in all conditions.
The setting of the threshing concave is displayed to the left of your driving seat.
The threshing drum together with the ABC Module have a wrapping angle of 120°. This results in a large and fully
utilisable separating surface for maximum performance in all crops.
1
4
2
3
Threshing drum with performance
capability
The heavy duty drum has eight rasp bars and
has a speed range on the 5 walker from 380 to
1210 rpm and 6 walker from 430 to 1310 rpm.
6 7
Heavy duty concave
The inter wire clearences are narrower at the
front of the concave so a more intensive
threshing is achieved. In the rear section there
is a higher separating capability due to the wider
wire distances.
Active Beater Concave (ABC Module)
The concave of the Fendt E- and L-series is extended
with the ABC Module. The ABC Module
creates an additional separation area and the
straw is guided directly and evenly to the straw
walkers. As a result the separating capacity of
the straw walkers is further optimised.
• 600 mm threshing drum
ensures even running
and gentle treatment of
straw
• Varying wire distances in
the threshing concave for
optimum threshing
results
• Independent settings for
front and rear of the concave
• ABC Module for
improved separation and
guidance of straw to the
walkers

The Power Feed Roller ensures
an even spread of the crop over
the entire width of the threshing
drum. Constant feed of crop to
the threshing system enables
high separation at low power
consumption and less fuel usage.
1
Come what may —
optimum harvest results in all conditions
2
1 Power Feed Roller
2. Main crop elevator
3. ABC Module
4. Multi Crop Separator plus
The threshing system is the heart of everycombine
harvester. Consequently, the
Fendt engineers paid particular attention
to its development. The patented MCS and
PFR ensure that the combine harvester has
the flexibility and the capability to adapt
easily to various crops and varying conditions.
These are available in the L-series.
3
4
Power Feed Roller (PFR)
The crop flow from the cutting table to the
main crop elevator is significantly improved
with the PFR. It is fitted directly in front of the
main crop elevator and has a diameter of 484
mm. At a speed of 267 rpm the PFR distributes
the crop evenly over the entire width. This ensures
that the whole threshing drum width is
used for separation.
8 9
Multi Crop Separator plus (MCS plus)
With the patented MCS plus, the separation
concave of the rotary separator can always be
adapted to suit the crop and conditions. The
MCS plus can be adjusted very simply by pressing
a button on the left-hand side of the machine.
These different settings maintain an excellent
straw quality for baling and also an improvement
of fuel consumption can be
achieved.
600 mm threshing drum ✔ ✔
ABC-module ✔ ✔
Power Feed Roller – ✔
MCS plus – ✔
MCS plus turned in:
Separation concave is positioned underneath
the rotary separator. This setting of
the threshing unit optimizes separation
performance for both long straw and wet
conditions.
E-Series L-Series
MCS plus turned out:
The separation concave is located
above the rotary separator. This
setting is especially recommended
for "easy-to-thresh" crops and dry
conditions.

The view into the walkers; an even and thin straw mat ensures an efficient
separation of remaining grain.
The adjustable dimple plate provides improved chopping quality.
Optimal straw quality, easiest conditions
The combine harvesters of the E- and L-series are equipped with a
multi adjustable high performance straw chopper.
Single lever changeover from chopping to swath in seconds.
The high performance straw walkers efficiently
separate the grain out of the straw
mat. The straw walkers are galvanised for
durability – as are over 80% of the combine
harvester parts. Even with large amounts of
straw the closed bottom straw walker design
ensures high performance and separation.
Straw walkers
The 4250 mm long, high performance walkers,
each having 4 high-steps of 210 mm and 150
mm crank oscillation, produce a thin straw mat.
The crop is efficiently separated through large
openings. The first section is strengthened in
order to withstand the highest loads particularly
in maize.
10 11
Straw chopper
All Fendt combine harvesters of the E- and L-
series are equipped with a straw chopper as
standard. With the straw chopper you achieve
an ideal chopping result. The double serrated
knives and the counter knives, which are also
serrated, are easy to adjust for the required
chopping length. The chopper is switched on
and off simultaneously with the thresher.
Straw management
The threshing system can be easily adjusted
that the straw is treated as gently as possible.
Even in difficult conditions, for example dry or
brittle straw, the best straw quality and a high
quality of animal litter is achieved.
With large amounts of straw, an ideal swath can
be generated, which is perfect for baling.
• High performance straw
walkers for efficient grain
separation
• Especially gentle
treatment of straw
• Straw chopper with even
straw distribution over
entire cutting width as
standard
• User-friendly change
from chopping to swath
• High stability and durability

1 Grain pan
2 HC sieve
3 Fan
4 Grain auger
5 Returns auger
6 Lower sieve
7 Sieve extension
1
The tall dividers ensure that, even while working on slopes, the grain-chaff
mixture is evenly distributed over the entire sieve width.
Here the chaff is separated from the wheat:
high performance cleaning system
3
There are many decisive factors in relation
to the high performance and capability of
harvest machines — but one of the most
important factors is undoubtedly the quality
of the grain sample. With the Fendt optimised
threshing, separating and cleaning
systems you can achieve excellent results in
any crops and conditions.
2
4
5
The fan is mounted directly on the combine harvester chassis. This ensures
reliability and functionality with a lack of vibration during operation.
6
7
Grain pan
The grain pan conveys the grain-chaff mixture
to the sieves. As it moves, the heavier grain
sinks below and the lighter material
remains on top. For an even distribution – even
on slopes – the grain pan is divided lengthwise
by high separators. The grain pan and the
threshing drum are the same width to ensure
that optimal cleaning is always possible.
12 13
High Capacity Sieve (HC Sieve)
The special surface and opposed working HC
Sieve allows for an optimised air flow and
cleaning performance. Because of this the HC
Sieve seldom needs adjustment. Even with
short, brittle straw the HC Sieve ensures the
cleanest crop. High dividers are fitted both
above and below to allow for an even crop distribution
on sloping ground.
Fan
The housing of the high performance fan has
two side vents and also one at the top. The air
flow is distributed over the entire width for
maximum efficiency. Easy to operate from the
cab, the driver can choose between 350 to 1050
rpm. A reduction for light crops to 270 to 840
rpm is optional.
• HC sieves for the best
cleaning performance
and cleanest harvest
crop
• Even crop distribution
from the grain pan to the
sieves
• Fan with three vents,
easy to operate from the
cabin
• Optimal cleaning even
on slopes through high
dividers

The size of the grain tank (5200 l – 8800 l) ideally suits the requirement of the
machine. The 6270 L combine comes with electrically operated grain tank lids as
standard equippment.
Plenty of room for a high yield With plenty of power throughout the harvest
Grain tank
With the turret unloading on the E- and L-series'
Fendt combine harvesters, even very high trailers
can be easily loaded. The high speed of 85 l
per second enables very speedy unloading. A
visual check can be done through the large
window behind the divers seat. In addition the
grain tank is equipped with an inspection hatch
and a light on the auger for night operation.
Grain tank capacity Engine
Engine capacity
5180 E 5200 litres
The engines of the Fendt combine harvesters
are especially equipped for the varying de-
5180 E 176 HP 129 kW
5220 E 7000 litres
mands on the machine. They always have plen- 5220 E 226 HP 166 kW
5250 E
6250 E
7000 litres
7500 litres
ty of power and low fuel consumption. Centralised
radiators cool the engine, hydraulics and
air conditioning. The dust separator ensures
5250 E
6250 E
243 HP
243 HP
179 kW
179 kW
5250 L / 5250 AL 7000 litres
that the powerful cooling system has a clean 5250 L / 5250 AL 243 HP 179 kW
6270 L 8800 litres
and efficient air supply.
6270 L 275 HP 202 kW
14 15
The powerful engine of the Fendt combine harvester is distinguished by its high
throughput and performance.

A place for long days:
comfortable cab for relaxed work
Everything in view, everything under control: from the cab you can see the entire cutting unit.
With Agritronic plus you monitor the most important
information at a glance.
The rear mirrors are electrically adjustable and are
heated for quick clearance on damp mornings.
During the harvest the driver spends many
days and hours on the combine harvester.
In order to stay relaxed and focused over
several hours, Fendt provides a very comfortable
work environment. The cab is
equipped with air conditioning, heating
and electrically adjustable mirrors as standard.
From the driver's seat you have the
best view in all directions.
With the multi-function lever you control: driving direction,
table up/down, tilt of cutting table, reel up/down,
reel forward/reverse, reel speed, unloading auger.
Seat*
The air suspended driver's seat delivers maximum
comfort, even on long working days. The
adjustable steering column also ensures that
the driver is in a comfortable sitting position. A
passenger seat is also provided.
*not in the 5180 E
Multi-function lever
The ergonomically designed multi-function lever
gives the driver precise control over the hydrostatic
drive. All main functions are operated
with one hand.
16 17
Agritronic plus *
The Agritronic plus is the information and control
system in your Fendt combine harvester.
With the Agritronic plus you can, for example,
control the drum and fan speed. In addition, important
information such as forward speed, level
of loss or the number of hectares are on display.
The cutting height and field pressure settings
are also adjusted with the Agritronic plus.
*not in the 5180 E
Side console*
The controls for engaging the threshing unit,
cutting table and unloading auger are located
on the side console. The controls for the threshing
drum, fan setting, 4 wheel drive and Auto
Level function are also positioned on the console.
*not in the 5180 E
• Comfortably equipped
cab
• Relaxed driving with the
air suspended driver's
seat
• Agritronic plus for easy
monitoring
• Ergonomically aligned
operation controls
• The most important
functions at your fingertips
with the ergonomically
designed multi-function
lever
• Whole table visible from
the driver's seat

With Auto Level
Auto Level system
Higher throughput even on slopes
Without Auto Level
The Auto Level function keeps the combine in a horizontal position and allows it to work just as effectively on slopes as on levelled
ground. The crop is distributed evenly onto the threshing and cleaning units, which optimises the productivity of your combine, even in
hilly terrain.
In order to be able to thresh on difficult
slopes, the Auto Level system is the solution:
with the help of the slope compensating
regulation, the combine harvester remains
completely horizontal even on slopes
of up to 20%. This ensures maximum performance
with minimum losses.
Function
The sensitive combine levelling system compensates
for uneven ground and slopes to
achieve maximum productivity. The final drive
swivels at the axle. The hydraulic levelling system
reacts instantly to changes in contours. The
Auto Level control is located on the side console
in the cab.
Total combine levelling up to 20 percent
The final drive of the front axle is swivelled by
two hydraulic cylinders. When driving on
18 19
sloped areas, sensors register every change in
inclination. The final drive is then automatically
swivelled so that the combine always stays horizontal
on slopes of up to 20%.
Manual setting possible
The Auto Level system can also be set manually,
for example, to unload onto a higher
transporter vehicle or to have better
access for maintenance.
• Auto Level slope
levelling system
• Slope levelling of up to
20% gradient
• Manual setting possible
Auto Level combines have constant
throughput on slopes

Even in difficult terrain the combine copes with every
situation because of the powerful 4 wheel drive.
The straw chopper deflectors can be electrically adjusted from the
cab. Even in rapidly changing conditions, an optimum distribution is
guaranteed.
Various options for individual requirements
With the chaff spreader, the chaff is distributed evenly over the entire cutting width. This offers
important advantages, particularly for minimum tillage.
4 wheel drive
With 4 wheel drive you can drive trouble-free
even in difficult ground conditions. Maintenance
for 4 wheel drive is not required. It can
easily be switched on and off on the side console.
An air compressor is also available as an option for quick and easy cleaning
and maintenance of the combine harvester in the field.
Chaff spreader
The chaff spreader is characterised by a very
even distribution of chaff and the ease with
which it can be operated. Especially for farms
using minimal tillage, the chaff spreader is an
important option.
20 21
Electrically adjustable deflectors
For simple setting of the straw spreading width,
electrically adjustable deflectors are available as
an option. The driver can then easily and quickly
adjust the straw chopper deflectors to suit
the particular conditions.
Air compressor
The air compressor allows you to clean the
combine harvester quickly and easily, and also
carry out maintenance on the filter and cooling
system in the field. You therefore save valuable
time during the harvest.

The engine and drive concept for the 5180 E has been ideally adapted to its
performance class. With the turret unloading system in standard spec., even the
entry model is equipped with a practical end efficient technology.
5180 E – Small combine with a large heart
The Fendt 5180 E is the choice for independent
farmers who intend to bring in
their own harvest. The combine harvester
has the same threshing, separating and
cleaning systems as the larger 5220 E and
5250 E models. With that you can achieve
the best harvest quality and high throughput.
The specification differences for the
5180 E and the larger models are in the engine,
grain tank and cab.
Engine
The 176 hp engine with 6.7 l displacement provides
you sufficient performance, easy maintenance
and a particularly high durability. The
long service intervals and low fuel consumption
are a plus in terms of environmental friendliness
and keeping your variable costs low.
22 23
Grain tank
With the turret unloading systems, high trailers
can also be loaded. The grain tank has a capacity
of 5200 l and achieves an unloading speed of
85 l per second. A full grain tank can be unloaded
in just one minute.
The functional cab on the 5180 E offers drivers a comfortable working environment,
even on long work days. The ergonomic layout of all the operating and
information controls enables fast and intuitive use.
Cab
The 5180 E cab is equipped with a mechanically
suspended seat, heating and air conditioning as
standard. The front and rear of the threshing
drum are also controlled from the left of the
driver's seat (independent of one another). The
monitoring screen and further functions are positioned
on the side console for easy access.

Maintenance friendly
Service at the Fendt standard
Maintenance friendliness
In the development of a new Fendt combine harvester, maintenance and ease of maintenance
are always the main focus. With the help of gas struts, the side shieldings are easy to open.
The best advice – not only when buying
Benefit from the competent advice of your Fendt business partner even before buying. He
will inform you about all product features and functions of the Fendt combine harvesters
– individually suited to your needs. After the purchase your nearest service-partner is also
always there for you.
The E and L series combines were designed
for easy maintenance, reliability and durability
to give overall low running costs. This
can be recognised particularly in technical
solutions which are based on proven experience
in combine harvester engineering.
80% of the Fendt combine harvester’s sheet
metal parts are galvanised for long life and
durability.
Easy-access
The shields open up wide to give easy access to the machine workings.
The central electronic unit is easy to reach from the driver's platform. Daily
maintenance points are open and easily accessible.
Low maintenance requirements – daily maintenance is performed in a short time
Only a few maintenance points need to be checked daily. The liquid levels are checked and important
greasing points are serviced in short time. The maintenance intervals for cleaning the radiators
are extended due to the automatic dust vacuuming. Drain pipes are present for simple oil and
cooling fluid changes to ensure that fluids are cleanly collected under the combine harvester
High durability
A long machine life with features designed for
du rability of the machine, low repair costs and a
good resale value ensure good business practice:
• Doubled chrome layers at the ends of the
good grain and returns auger
• Modular construction of the cutting table and
elevators for easy change of parts
• Separate protection of individual components
through slip clutches
• Replaceable wear plates on the rotary separator
teeth
24 25
Know-how through practical training
Benefit from technical instruction to get best from your Fendt combine
harvester in the field, on the street and in the books. Professional instructors
will show you in theory and in practice how to get the most efficient
and safe use of this first class technology.
Fendt original parts – from AGCO parts – so that your Fendt
remains 100% a Fendt: Fendt original parts are tailored exactly to your
Fendt. You have a guaranteed standard of quality and tested functionality.
This works in your favour in many ways: 12 months' guarantee for Fendt
original parts and fitting – performance guarantee at the highest standard.
Central spare parts warehouse in the middle
of Europe
One example of our customer orientated performance
is the fast delivery and high availability
of spare parts. This is why the five large AGCO
warehouses in Europe all work together. The
central warehouse is in Ennery (France), near
Metz. For an order placed through a Fendt business
partner before 6 pm, the parts will be delivered
to the partner by 8 am on the next day
at the latest. This applies to an area with a radius
of 1000 km around Ennery.
Overnight supply
of square parts
Highest availability direct from your local dealer
Spare parts availability plays a particularly important role for harvest machines. For this reason local availability
is a very decisive factor. That is why AGCO parts offers the Fendt dealers the "Opti-parts" programme.
The result is that the Fendt business partners are actively pre-stocked with all common parts, so that many
spare parts are available immediatly from the dealers. This is ideal for keeping downtime to an absolute
minimum.
Always in good shape
Through regular and preventative maintenance, your machine is always kept in top form and ready for use.
Your dealer can actively support you both before and after the harvest with the check list for Fendt harvest
machines. Preventative maintenance minimises the risk of downtime for the next harvest whilst guaranteeing
that the value of your machine remains intact through expert inspection.
Top quality personnel — satisfied customers
Nowadays, your service and technology requirements
can only be met with well trained
workshop personnel. This is why we consider
the education of our business partners to be of
great value, so that the workshop personnel are
always in touch with the latest technology. This
offers you the security of always receiving the
best service and support.

Cross-section of the E-series
1 Cutting table
2 Main crop elevator
3 Threshing drum
4 Concave
5 Beater
6 ABC module
7 Straw walker
8 Grain pan
9 HighCapacity Sieves
10 Straw chopper
11 Fan
12 Good grain auger
13 Returns auger
14 Turret unloading system
15 Grain tank
16 Engine
17 Cab
18 Air suspended driver's seat
19 Adjustable steering column
20 Agritronic plus
1
20
19
17
2
18
26 27
4
15
3
5
6
11
8
16
12
13
14
9
7
10

Cross-section of the L-series
1 Cutting table
2 Power Feed Roller
3 Main crop elevator
4 Threshing drum
5 Concave
6 Beater
7 ABC module
8 Multi Crop Separator plus
9 Straw walker
10 Grain pan
11 HighCapacity Sieves
12 Fan
13 Good grain auger
14 Returns auger
15 Turret unloading system
16 Grain tank
17 Engine
18 Cab
19 Air suspended driver's seat
20 Agritronic plus
1
2
20
18
3
19
28 29
4
6
16
5
7
8
10
12 13
17
14
9
15
11

Cutting table
Cutting width (m)
Terra Control cutting height control
Auto Level table guidance
Cutting frequency (strokes / min)
Feed type
No. of chains
Full width fingers
Reel speed (rpm)
Threshing unit
Drum width (mm)
Drum diameter (mm)
Threshing drum speed range
Wrapping angle threshing drum
Concave area (m2)
Multi Crop Separator plus (MCS plus)
MCS plus width
MCS plus diameter
Total concave area
Electrical concave setting
Independent setting front and back
Straw walker
Straw walker length (mm)
No. of steps
No. of straw walkers
Straw walker area
Cleaning
Total sieve area
Fan type
Fan speed
Fan speed reduction
Returns to drum
Total separation area (m2)
Straw management
Straw chopper
64 knives
52 knives
Double serrated knives
Electrically adjustable deflectors
Chaff spreader
Single lever enabling
Technical specifications
5180 E 5220E 5250 E 6250 E 5250 L 5250 L/AL 6270 L 5180 E 5220E 5250 E 6250 E 5250 100° L 5250 L/AL 6270 4.20 L
Grain tank
5200
4.20
4.20 - 5.40 4.20 - 7.60 4.20 - 7.60 4.80 - 7.60 4.20 - 7.60 4.20 - 7.60 4.80 - 7.60
Capacity (l)
85
7000
7000
7500
7000
SISU
-
-
l
m
l
m
l
m
1220
l
l
1220
Unloading rate (l/sec)
Unloading type
100°
85
85
85
turret unloading
IVECO
NEF
85
7.4
1220
1220
1220
1220 Power Feed 1220 Power Feed
Swivel angle of unloading auger
4.20
100°
100°
100°
6.7
100° 202 / 275
-
-
-
-
Roller Power Feed Roller
Max. unloading height (m)
4.20
4.20
4.20 179 / 243 4.20
450
3
Roller
4
IVECO
450
3
3
3
4
3
13 - 60
Engine
NEF
IVECO
IVECO
IVECO
IVECO
l l l
13 - 60 l
Engine type
6.7
NEF
NEF
NEF
NEF
4
13 - 60 13 - 60 13 - 60 13 - 60
13 - 60
Cubic capacity
129 / 176 6.7
6.7
6.7
6.7 --4000870011,
Power (kW/hp) (ISO TR 14396)
450 165 / 226 179 / 243 179 / 243
179 / 243 500650/75R32
Fuel tank (l)
450
450
450
450 460/70R24
1340
600
380 - 1210
120°
0.83
-
1340
600
0.99
-
4256
4
5
5.73
4.67
Radial fan
350 - 1050
270 - 840
6.72
-
-
1340
600
380 - 1210
120°
0.83
-
1340
600
0.99
l
l
4256
4
5
5.73
4.67
Radial fan
350 - 1050
270 - 840
l
6.72
l
-
l
l
m
m
l
1340
600
380 - 1210
120°
0.83
-
1340
600
0.99
l
l
4256
4
5
5.73
4.67
Radial fan
350 - 1050
270 - 840
l
6.72
l
-
l
l
m
m
l
1600
600
430 - 1310
120°
0.99
-
1600
600
1.18
l
l
4256
4
6
6.81
5.58
Radial fan
350 - 1050
270 - 840
l
7.99
l
l
-
l
m
m
l
1340
600
380 - 1210
120°
0.83
1340
600
1.89
4256
4
5
5.73
4.67
Radial fan
350 - 1050
270 - 840
7.62
-
7000
85
1340
600
380 - 1210
120°
0.83
l
1340
600
1.89
l
l
4256
4
5
5.73
4.67
Radial fan
350 - 1050
270 - 840
l
7.62
l
-
l
l
m
m
l
1600
600
430 - 1310
120°
0.99
1600
600
2.25
4256
4
6
6.81
5.58
Radial fan
350 - 1050
270 - 840
9.06
-
8800
85
100°
30 31
Drive
Hydrostatic drive
Number of gears
4 wheel drive
Cab
Mechanically suspended driver's seat
Air suspended driver’s seat
Passenger seat
Heating
Air conditioning
Agritronic plus
Monitor
Weights and dimensions
Height (transport position) (mm)
Length with chopper (mm)
Weight* (kg)
Tyres
Front (standard)
Rear (standard)
Transport width with tyres:
800/65R32 (mm)
650/75R32
620/75R34
620/75R30
*depends on equipment installed
optionalbasic specifications – not available
3
-
-
-
-
4000
8700
10,300
620/75R30
405/70-20
-
3250
3195
3195
l
3
m
-
l
l
l
l
l
-
4000
8700
10,800
620/75R30
405/70-20
3628
3250
3195
3195
l
3
m
-
l
l
l
l
l
-
4000
8700
10,800
650/75R32
460/70R24
3628
3250
3195
-
l
3
m
-
l
l
l
l
l
-
4000
8700
11,500
650/75R32
460/70R24
3880
3490
3480
-
4
--4000870011,
900650/75R32
460/70R24
3628
3250
3195
-
l
4
m
-
l
l
l
l
l
-
4000
8700
11,200
650/75R32
460/70R24
-
3490
-
-
3880
3490
3480
-

Sales agent:
Leaders drive Fendt!
MD-E-L/1.0-EN/09-08/15 AZ
All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and
running costs of the vehicles correspond with the latest information available at the time of going to
press. Changes may be made before the time of purchase. Your Fendt dealer will be pleased to supply
you with up-to-date information.
AGCO GmbH
Fendt-Marketing
D-87616 Marktoberdorf
Fax (0) 8342 / 77-220
www.fendt.com