Height Safety Catalogue - Ferno

CMC Rescue S/S Swivel Pulleys
The rotating swivel aligns the rope with the direction of pull making these swivel
pulleys ideal for high anchor points or tripods and the overall length is minimised by
combining the swivel with the pulley. The stainless steel sheave on the single pulley
permits use with either rescue rope or wire cable. The proprietary pivoting side plate
can open without having to disconnect the pulley from the anchor, allowing rope to
be quickly inserted or removed. Use the swivel double pulley when you need two
ropes to run together.
A double detent button prevents accidental opening. Sheave size 51 mm x 13 mm.
Code Sheave Diameter Sheave Width MBS Weight
CMC300431 Single Stainless Steel Light Use 32.7 kN 320 g
CMC300430 Single Stainless Steel General Use 39.4 kN 320 g
CMC300432 Double Aluminium General Use 43.5 kN 414 g
OG1 Prusik Minding Pulley
The OG1 Prusik Minding Pulley has an impressive 36 kN load rating, however its
distinctive feature is the combination of a side opening plate with a unique
stainless steel gate that allows you to access the sheave without having to
disconnect the pulley from its anchor or karabiner. The OG1 Pulley can
accommodate up to three 12 mm karabiners at its connection point.
Researched and developed by our team in Australia, the Versa-OG1 Pulley is an
invaluable aid for any heavy duty industrial rigging or rescue operations. Made
from high grade anodized aluminium and stainless steel.
Sheave size: 51 mm x 13 mm..
Rope Length Width Depth Weight
11 mm - 13 mm 180 mm 120 mm 47 mm 950 g
HARDWARE HARNESSES
- PULLEYS
23