Backsafe Australia - HANDLING EQUIPMENT

HANDLING EQUIPMENT
59
Fork Slippers
Extend the versatility of your lift truck. Designed for ease of operation with slim profile. Standard finish is enamel paint finish black, but
also available zinc plated up to 6.5 tonne capacity. In accordance with AS2359.15 slippers used for general usage should be no longer
than 167% of the supporting tine’s length.
If the slippers are longer than 167%, then usage of those slippers
shall be restricted to their specified application.
n Supplied with locking pins
n Fitted with rating plate
Hire Option
AVAILABLE
Type Length (mm) To suit max tine size (mm) Weight per pair (kg) SWL perpair at 600mml/C
FE1-16 1600 100 X 45 50 3000
FE1-18 1800 100 X 45 56 3000
FE1-21 2100 100 X 45 66 3000
FE1-24 2400 100 X 45 75 3000
FE2-16 1600 130 X 50 60 4500
FE2-18 1800 130 X 50 66 4500
FE2-21 2100 130 X 50 78 4500
FE2-24 2400 130 X 50 88 4500
FE3-16 1600 155 X 55 91 6500
FE3-18 1800 155 X 55 102 6500
FE3-21 2100 155 X 55 119 6500
FE3-24 2400 155 X 55 136 6500
FE3-30 3000 155 X 55 170 6500
Customer Service 1300 305 314
Probe Attachment
Slip-on roll prong suitable for fabric, cable and coil products. Can also be used for carpet
handling, but usage is generally restricted to larger forklifts due to the extended load centre
created by the length of the prong. These attachments quickly adapt to almost any forklift
and require only the connection of a safety chain to prevent unintentional disengagement.
Prongs are manufactured from high tensile steel and can be made to any length.
Model: HSRPPF
Capacity: 350kg @ 2200mm
Probe Diameter: 70mm
Probe Length: 2000mm
Unit Weight: 150kg