Table saws
Table saws
Table saws
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Table</strong> <strong>saws</strong>
CEDIMA TABLE SAWS SERIES CTS-26 tiles, glazed tiles, natural stone slabs<br />
CTS-26 CTS-26 L<br />
The table <strong>saws</strong> series CTS-26 are very stable and long-lasting cutting machines<br />
for cutting tiles, glazed tiles or thin natural stone slabs.<br />
The XL-version enables cutting large tiles up to 80 x 80 cm edge length without<br />
any diffi culty.<br />
technical data CTS-26 CTS-26 L CTS-26 XL (without picture)<br />
order-No. - 60 03 60 04 60 06<br />
max. cutting depth mm 65 65 65<br />
max. cutting length mm 650 850 1150<br />
max. blade-Ø mm 250 250 250<br />
bore hole of blade mm 25,4 25,4 25,4<br />
speed of cutting shaft rpm 2770 2770 2770<br />
drive motor kW/V/Hz/A 1,1/230/50/8 1,1/230/50/8 1,1/230/50/8<br />
protective system - IP54 IP54 IP54<br />
contents water container/bucket litres 18/20 20/20 25/20<br />
dimensions L/W/H mm 1040/480/480 1240/480/480 1530/480/480<br />
weight kg 58 70 76<br />
sound pressure level db(A) 78 78 78<br />
sound power level db(A) 96 96 96<br />
2<br />
• insertable table with rubber mat and adjustable lateral stop<br />
• precise sliding cutting head, continuously lockable<br />
• adjustable guide rail for mitre cuts from 0° - 45°<br />
• water pump in water container or bucket<br />
• splash guard 2 sides<br />
• easy transport by removable plug-in feet
CEDIMA TABLE SAWS CTS-56, CTS-57 G concrete, bricks, clinkers, natural stone<br />
*400 V version on request<br />
CTS-56 CTS-57 G<br />
The CTS-56 and CTS-57 G are table <strong>saws</strong> for cutting quickly and precisely<br />
bricks, clinkers, natural stone and similar materials.<br />
The combination of stability and technical details make them ideal equipment<br />
for daily use.<br />
technical data CTS-56* CTS-57 G*<br />
order-No. - 60 56 60 39<br />
max. cutting depth mm 130 125<br />
max. cutting length mm 600 600<br />
max. blade-Ø mm 400 400<br />
bore hole of blade mm 25,4 25,4<br />
speed of cutting shaft rpm 2770 2770<br />
drive motor kW/V/Hz/A 2,2/230/50/12 2,2/230/50/12<br />
protective system - IP54 IP54<br />
contents water container/bucket litres 35 35<br />
dimensions L/W/H mm 1180/600/600 1140/580/730<br />
weight kg 70 74<br />
sound pressure level db(A) 69,8 69,8<br />
sound power level db(A) 88,5 88,5<br />
3<br />
• powerful blade drive motor<br />
• lockable swivel cutting head (the CTS-57 G is adjustable for mitre cuts from<br />
0° to 45°)<br />
• smooth-running roller table with adjustable lateral stop<br />
• supply with cooling water by electric water pump and simple cleaning by a<br />
combination of water container with overfl ow plug and bucket<br />
• easy transport and loading by removable plug-in feet, transport rollers, carrying<br />
handles and crane eyes<br />
Loading and transport<br />
For transport unlatch the feet and swivel them up below the water<br />
container. For simple loading in a vehicle, place the wheels into the<br />
provided receptacles at the cross bar. Thus the saw can be placed<br />
onto the loading platform and pushed without diffi culty.
CEDIMA TABLE SAWS SERIES CTS-81<br />
CTS-81 CTS-81 L<br />
<strong>Table</strong> <strong>saws</strong> of CTS-81 series are universal cutting machines for construction<br />
sites. With their infi nitely adjustable, precise and smooth-running sliding<br />
cutting heads they guarantee fatigue-free working.<br />
4<br />
For mitre cuts the guide rail of the <strong>saws</strong> can be adjusted infi nitely from 0° to<br />
45°. Due to the large cutting length the <strong>saws</strong> are especially suitable for cutting<br />
large-sized structures like steps or natural stone slabs.<br />
technical data CTS-81* CTS-81 L* CTS-81 XL*<br />
order-No. - 60 25 60 27 60 29<br />
max. cutting depth mm 130 130 110<br />
max. cutting length mm 850 1250 1640<br />
max. blade-Ø mm 400 400 350<br />
bore hole of blade mm 25,4 25,4 25,4<br />
speed of cutting shaft rpm 2770 2770 2770<br />
drive motor kW/V/Hz/A 2,2/230/50/12 2,2/230/50/12 2,2/230/50/12<br />
protective system - IP54 IP54 IP54<br />
contents water container/bucket litres 25/20 35/20 45/20<br />
dimensions L/W/H mm 1150/670/610 1550/670/610 1950/670/610<br />
weight kg 78 94 110<br />
sound pressure level db(A) 81,4 81,4 81,4<br />
sound power level db(A) 96,5 96,5 96,5<br />
*400 V version on request
CTS-81 XL<br />
For mitre cuts the guide rail of the <strong>saws</strong> can be adjusted infi nitely from 0° to<br />
45°. Please observe: the achievable cutting depth will decrease by the rate of<br />
inclination.<br />
5<br />
concrete, clinkers, steps, large-sized natural stone plates<br />
• powerful drive motors (on demand also as 400<br />
V-version)<br />
• cutting lengths up to 1640 mm (CTS-81 XL)<br />
• adjustable guide rail for mitre cuts<br />
• precise, infi nitely adjutable swivel cutting head<br />
• supply with cooling water by electric water pump and<br />
simple cleaning by a combination of water container<br />
with overfl ow plug and bucket<br />
• handles and removable slide-in feet<br />
• insertable table with rubber mats<br />
• Protection against overlapping cut and splash guard at<br />
3 sides of the machine<br />
• fi nal stop and adjustable lateral stop<br />
For safeguarding especially large work pieces an auxiliary table is available<br />
for the table <strong>saws</strong> of the series CTS-81. The table is supplied with an skidproof<br />
rubber mat and a lay-on edge to which the lateral stop can be mounted (see<br />
accessories page 7).
CEDIMA BLOCK SAWS CTS-265, CTS-375, CTS-425<br />
CTS-375<br />
• infi nitely height-adjustable and lockable cutting head<br />
• feed by lateral hand wheel for comfortable handling<br />
• removable water container, easy cleaning<br />
• lockable steering wheels<br />
• splash guard<br />
• ring eyes for easy relocation on the job site<br />
6<br />
CTS-265<br />
• powerful three-phase motor<br />
• infi nitely height-adjustable and lockable cutting head<br />
• removable water container of stainless steel, easy cleaning<br />
• roller table with feed bar<br />
• water pump in water container<br />
• splash guard<br />
• lockable steering wheels and extra large running wheels for easy transport<br />
• ring eyes for easy relocation on the job site<br />
technical data CTS-265 CTS-375 CTS-425<br />
order-No. - 60 09 60 36 60 01<br />
max. cutting depth mm 265 425 425<br />
max. cutting length mm 500 850 980<br />
max. blade-Ø mm 650 1000 1000<br />
bore hole of blade mm 25,4 60 60<br />
speed of cutting shaft rpm 1420 1070 1072<br />
drive motor kW/V/Hz/A 5,5/400/50/12 7,5/400/50/15,3 7,5/400/50/15,3<br />
protective system - IP54 IP54 IP54<br />
contents water container litres 50 100 65<br />
L/W/H mm 1700/800/1520 1800/1100/1500 1750/930/1650<br />
weight kg 200 325 292<br />
sound pressure level db(A) 87 96 96<br />
sound power level db(A) 104,9 114 114
Block <strong>saws</strong> are designed for cutting large-sized blocks made of concrete,<br />
Poroton or lime sand-stone. With the models CTS-265, CTS-375 and CTS-425<br />
CEDIMA recommends a technique for the construction industry to separate<br />
stones quickly and precisely.<br />
ACCESSORIES FOR TABLE SAWS<br />
large-sized blocks made of concrete, Poroton, lime sand -stone<br />
jolly table for mitre cuts angle stop with scale prism for cutting round objects auxiliary table with rubber mat<br />
7<br />
CTS-425<br />
• infi nitely height-adjustable and lockable cutting head<br />
• lockable roller table with feed bar<br />
• laterally pull-out water container in light plastic design, very easy<br />
cleaning<br />
• 2nd water container can be stored in the frame<br />
• lockable steering wheels<br />
• splash guards rear and right<br />
• ring eyes and mounting left for fork lift for easy and safe relocation<br />
and transport<br />
order-No. operation with description<br />
60 30 CTS-56, CTS-57 G jolly table for mitre cuts, pivoting by 45° on both sides, with angle scale<br />
60 31 CTS-56, CTS-57 G angle stop with scale<br />
60 35 CTS-56, CTS-57 G prism for cutting round objects, with rubber mat against dislocating<br />
60 32 CTS-26, CTS-81 Serie auxiliary table with rubber mat for cutting long objects, 614 x 586 mm, with lay-on edge and slide-in feet
• DIAMOND SAW BLADES<br />
for wet and dry cutting in concrete, reinforced concrete, asphalt, natural stone;<br />
saw blade diameter from 110 to 2200 mm<br />
• DIAMOND DRILL BITS<br />
for wet and dry drilling in concrete, reinforced concrete, asphalt, natural stone;<br />
drill bit diameter from 12 to 1200 mm<br />
• DIAMOND TOOLS<br />
grinding discs for hand-held and fl oor grinding machines, diamond wires,<br />
chamfering discs, diamond chains, diamond segments<br />
• JOINT CUTTERS<br />
with petrol, diesel or electric motor, with and without automatic feed;<br />
cutting depths to 900 mm<br />
• CORE DRILLING MACHINES<br />
hand-held drilling machines and drill columns with electric or hydraulic drill motor;<br />
drill diameter from 12 to 1250 mm<br />
• WALL SAWS & WIRE SAWS<br />
electric, hydraulic and electro-hydraulic wall <strong>saws</strong> up to 730 mm cutting depth;<br />
automatic wire <strong>saws</strong>, circular <strong>saws</strong><br />
• TABLE SAWS<br />
for cutting tiles, glazed tiles, general building materials or large-sized stones;<br />
cutting depths to 425 mm<br />
• SPECIAL MACHINES<br />
reinforced concrete breaker, fl oor grinding machines, suface milling machine,<br />
chain <strong>saws</strong>, hand-held saw<br />
CEDIMA ® Diamantwerkzeug- und Maschinenbaugesellschaft mbH<br />
Lärchenweg 3 • 29227 Celle/Deutschland<br />
Tel. +49 (0)51 41 / 88 54 - 0 • Fax +49 (0)51 41 / 86 42 7<br />
Internet: www.cedima.com • E-Mail: info@cedima.com