Powerful! - FLEX

Powerful!
FLEX Cordless drill driver and rotary hammer drills.

Cordless drill driver
Two speeds on the ALi 10.8 G ensure optimum
speed selection for drilling and screwdriving.
ALi 10.8 G includes an LED lamp as standard
equipment and is powered by the auxiliary
battery.
2
The ergonomic grip and low weight make the
ACH 14.4 easy to use in all positions.
The easy-change battery pack reduces work
interruptions to a minimum.
FLEX cordless
tools have the
power.
Designed for professional continuous
operation constructed appropriately
robust – e.g solid, yet light aluminium gear
housing and completelymetal drill chucks
on the cordless drills and hammer drills
ensure lasting stability and long service
life.
The user friendliness is exemplary:
with non-slip rubber grip to improve
the feel in the hand and an ultrasensitive
accelerator trigger switch with quick stop.
The benefits are innumerable.
Advantages of lithium ion
technology
- No memory effect
- Powerful: full battery power from
the first to the last screw
- Low weight, lighter than conventional
batteries, better to handle
- FLEX Protection system: protects
from overloading, overheating and
deep discharge.

ALi 10,8 G
2 speed cordless drill/screwdriver
with lithium ion technology
• 20 torque and 1 drill setting
• Quick-action chuck with spindle lock
• Exchangeable lithium ion battery 1,3 Ah
• No memory effect
• Integrated LED light
• Rapid battery charger (charge time 60 min)
• Small machine with lots of power
• Ergonomically designed, non-slip, soft grip handle for safe,
comfortable working
• Perfect for drilling in wood, plywoods, plastics and metal.
Thanks to its compact design it is especially good when working
in restricted spaces
SPECIFICATIONS
Battery voltage 10,8 V
Battery capacity 1,3 Ah
Torque max. (drill setting) 38 Nm
Torque positions 20+1
No load speed 1st gear 0-345 rpm
No load speed 2nd gear 0-1240 rpm
Chuck Ø 0,8-10 mm
Weight with battery 1,1 kg
Type Order no.
ALi 10,8 G 338.583
Standard equipment:
2 battery pack
1 rapid battery charger
1 LED light
Bit set
1 plastic carry case
Accessories ALi 10,8
Rapid charger
LED light
Battery pack
Cordless drill driver
Charging time 60 min for battery pack 10.8 V/1.3 Ah Li-Ion.
Battery not included. The standard auxiliary battery in the
ALi 10.8 V series or battery pack 336.319 can be used.
Li-Ion battery pack 10.8 V/1.3 Ah for ALi 10.8 series.
QP Order
no.
1 336.327
QP Order
no.
1 336.335
QP Order
no.
1 336.319
3

Cordless drill driver
AC 14,4 ACH 14,4
2-speed cordless drill driver 14.4 V
with lithium ion technology
• Exchangeable lithium ion battery 2,6 Ah
• No memory effect
• Integrated LED light
• Quick-action chuck with spindle lock
• 15 torque settings and 1 drill setting
• Clockwise and counterclockwise rotation; middle setting: safety
lock
• Charge indicator
• Rapid battery charger (charge time 60 min)
• Ergonomically designed, non-slip, soft grip handle for safe,
comfortable working
• Ideally suited for use on the construction site. Max. torque: soft
torque 25 Nm, hard torque 75 Nm
• Two speeds for excellent results in drilling wood, composite wood
products, plastic and metal
SPECIFICATIONS
Battery voltage 14,4 V
Battery capacity 2,6 Ah
Torque max. (drill setting) 25/75 Nm
No load speed 1st gear 0-500 rpm
No load speed 2nd gear 0-1800 rpm
Chuck Ø 1,5 - 13 mm
Weight with battery 1,9 kg
Type Order no.
AC 14,4 348.449
4
Standard equipment:
2 battery pack
1 rapid battery charger
1 plastic carry case
2-speed cordless impact drill 14.4 V
with lithium ion technology
• Exchangeable lithium ion battery 2,6 Ah
• No memory effect
• Integrated LED light
• Quick-action chuck with spindle lock
• 15 torque settings and 1 drill setting
• Clockwise and counterclockwise rotation; middle setting: safety
lock
• Hammer drilling function
• Charge indicator
• Rapid battery charger (charge time 60 min)
• Ergonomically designed, non-slip, soft grip handle for safe,
comfortable working
• Ideally suited for use on the construction site. Max. torque: soft
torque 25 Nm, hard torque 75 Nm
• Two speeds for excellent results in drilling wood, composite wood
products, plastic and metal
SPECIFICATIONS
Battery voltage 14,4 V
Battery capacity 2,6 Ah
Torque max. (drill setting) 25/75 Nm
No load speed 1st gear 0-500 rpm
No load speed 2nd gear 0-1800 rpm
Chuck Ø 0-27000 rpm
Weight with battery 1,5 - 13 mm
Weight with battery 1,9 kg
Type Order no.
ACH 14,4 348.430
Standard equipment:
2 battery pack
1 rapid battery charger
1 plastic carry case

Acessories AC 14,4/ACH 14,4
Battery pack
Li-Ion rechargeable battery pack 14.4 V/2.6 Ah for AC and ACH
T
QP Order
no.
1 348.708
Diamond dry drill bits
For drilling without water using cordless drill drivers
or drills. Ideal for drilling dowel holes in fine stoneware
tiles (up to hardness 5), granite and marble.
Advantages at a glance
• low technical effort in comparison with wet drilling,
only cordless screwdriver required
• no noise nuisance
• no dirty water
• no contamination of the tile grout with drilling sludge
• subsequent cleaning and drying of the work area not
required
Tips and tricks:
The service life of the drill bit is increased many times
if the drill bit is cooled down briefly in water after each
drilling process. The cooling process removes particles
stuck to the cutting edges. To work effectively and
economically, the DD-DRY should be used exclusively for
drilling through hard coverings. Dowel holes in masonry
or concrete should be made with HW drill bits.
Optimum cooling by
wax filling. The wax
is melted by the heat
generated during the
drilling process and
therefore cools the diamond
impregnation.
The multi-layered diamond
impregnation
ensures a maximum
service life and rapid
work progress.
Diamond impregnation
in the hollow spindle
crushes the drill core
and reduces the drilling
resistance.
Designation D
in mm
T
in mm
L
in mm
QP Order no.
DD-DRY D6x30 HEX 6 30 80 1 386.286
DD-DRY D8x30 HEX 8 30 80 1 386.294
DD-DRY D10x30 HEX 10 30 80 1 386.308
DD-DRY D14x30 HEX 14 30 80 1 386.316
Rapid charger
Charging time 60 mins.. for Li-Ion battery 14.4 V/2.6 Ah
QP Order
no.
1 348.694
Tile drill bits
For drilling without water using cordless drill drivers
or drills. The extremely hard tip of the drill bit is pressed
gently onto the surface of the tile. This makes a precision
mark for the required drill hole. As the drill bit is
self-centring, it cannot slip on hard surfaces. Ideally
suited for drilling dowel holes in tiles and fine stoneware
up to hardness 3.
Tips and tricks:
The drill bit drills through the covering (e.g. tile) only.
A suitable carbide drill bit should be used for the material
(masonry, concrete, etc.) under the covering. Insert tile
drill bit TD clockwise only.
D=Ø D
The hollow shank redu-
Absolutely precise spot
ces the weight and
drilling. The carbide
stores the coolant.
drill point breaks the
Hexagonal shank AF
for clamping in 13mm
surface coating and
prevents the drill bit
T
chuck, prevents over-
from wandering.
tightening in the chuck
The vacuum-welded
and damage to the
carbide cutting edge
L shank. The three chuck
jaws are positioned
ensures maximum
service life and a
L
fully on the clamping
surfaces and provide
the best grip.
durable connection.
Designation D
in mm
T
in mm
Cordless drill driver
Cutting edge with
diamond cut allows
exact spot drilling and
tear-free drilled holes.
The spiral spindle
guarantees quick
removal of the drilling
dust.
The hardened shank
reduces damage and
guarantees optimum
concentricity.
L
in mm
QP Order no.
TD D5x50 D10 5 50 110 1 386.324
TD D6x50 D10 6 50 110 1 386.332
TD D8x50 D10 8 50 110 1 386.340
5

2,5 kg Rotary hammer drill
CHE 2-26 SDS-plus. The compact multi-talent.
The light 2.5 kg and compact 800 watt CHE 2-26 SDS-plus hammer drill and chisel is ideal for drilling, hammer-drilling in
masonry and concrete, for plugs, anchoring systems and through-holes. The 2.5 kg hammer drill is ideal for light-duty chiselling
work and removal of plaster and tiles.
Small but really fine. Even wall tiles present no difficulty for the CHE 2-26 SDS-plus thanks to its chiselling function. The chisel can be set in all positions.
The CHE 2-26 SDS-plus has no trouble at all in dealing with plug
holes and through-holes up to 26 mm for electrical cables and
tubes.
6
No tools are needed to change drills and chisels thanks to SDS-plus.
As a result, the CHE 2-26 SDS-plus can be rapidly set to all the requirements.

CHE 2-26 SDS-plus
Universal rotary hammer drill 2,5 kg, SDS-plus
• Light 800 watt hammer drill and chisel hammer, pistol design
with the clockwise/anticlockwise rotation function
• Hammer drilling
• Depth limit gauge: for precision drilling
• Rotation stop for chiselling
• Max. drilling range up to 26 mm
• Accelerator switch with lock-on function
• Ideal for drilling and hammer drilling, diameters from 4-18 mm
in masonry and concrete for dowel fixings or through-holes.
• For light-duty chiselling work when removing plaster and tiles
SPECIFICATIONS
No load speed 0-1100 rpm
Blows per minute 0-5200 rpm
Single impact energy (EPTA) 2,3 J
Max. drill hole Ø in concrete 26 mm
Max. drill hole Ø
in masonry (drill bit)
68 mm
Max. drill hole Ø in wood 30 mm
Power input 800 watt
Tool fixture SDS-plus
Weight 2,5 kg
Type Order no.
CHE 2-26 SDS-plus 365.904
Standard equipment:
1 handle
1 drill depth stop
Carry case
2,5 kg Rotary hammer drill
Easy-to-operate switch for
the following functions:
1 Drilling without hammer
2 Drilling with hammer
3 Continuous chisel positioning
4 Hammer function for
chiselling
Acceleration trigger, lock-on
function and a clockwise/
anticlockwise function.
The soft grip ensures a
secure hold.
The additional handle
with an integrated depth
stop can be easily rotated
and locked at the desired
position. With the SDS-plus
you can quickly change both
drills and chisels without
any tools.
7

5 kg Rotary hammer drill
CHE 5-45 SDS-max. Handy 5 kg combined hammer drill.
The handy and powerful 1100 watt CHE 5 -45 SDS-max hammer drill and chisel in L form has a hammer-impact drill function,
chisel function and a rotation stop for chiselling with vibrationdampened handle. It also has a service display. Regular
maintenance greatly extends the life of the machine.
The CHE 5-45 SDS-max is ideal for drilling, hammer-drilling in both masonry and concrete. For example, drilling holes for anchoring systems and
through-holes. Suitable for light-duty chiselling to remove plaster and masonry as well as lightweight concrete.
8

CHE 5-45 SDS-max
Universal rotary hammer drill, 5 kg, SDS-max
• Handy L-design 1100 watt rotary hammer drill and chisel hammer
• Hammer drilling
• Rotation stop for chiselling
• Max. drilling range: up to 45 mm with hammer drill, 80 mm
drilling with a core drill, 90 mm drilling with carbide metal drill
bit
• With a variable speed setting for optimum speed depending on
requirement and tool
• With supplementary handgrip and vibration-dampened handle
• Ideal for hammer-drilling, Diameter 10-32 mm in masonry and
concrete for composite or injection anchoring systems and
through-holes
• Suitable for light-duty chiselling work to remove plaster,
masonry and lightweight concrete
• The integrated service display indicates the next change for
carbon brushes as well as the service interval
SPECIFICATIONS
No load speed 235-500 rpm
Blows per minute 1350-2870 rpm
Single impact energy (EPTA) 7,1 J
Chisel positions 12
Max. drill hole Ø in concrete 45 mm
Max. drill hole Ø
in masonry (drill bit)
105 mm
Power input 1100 watt
Tool fixture SDS-max
Weight 5,9 kg
Type Order no.
CHE 5-45 SDS-max 365.912
Standard equipment:
1 drill depth stop
1 handle
1 tube of grease
Carry case
5 kg Rotary hammer drill
The additional handle
with an integrated depth
stop can be easily rotated
and locked at the desired
position. With the SDS-max
you can quickly change both
drills and chisels without
any tools.
Setting of the 12 chisel
positions.
Easy-to-operate switch for
the following functions:
Drilling with hammer and
chisel functions.
The vibration-dampened
and anti-slip handle ensures
a secure hold and eases
strain on the user.
With a variable speed
setting for optimum speed
depending on requirement
and tool
The CHE 5-45 SDS-max has
both a power system (green)
and service display. Send the
machine to FLEX customer
service should the service
display (red) light up.
Keeping to the maintenance
intervals clearly extends the
life of the machine.
9

5 kg Demolition hammer
10
DH 5 SDS-max.
The powerful 5 kg
demolition hammer.
The DH 5 SDS-max 5 kg demolition hammer is very handy and
compact. With its powerful and sturdy 1050 watt motor it is
ideal for medium-duty chiselling work in concrete and masonry
particularly in walls and ceilings, for concrete face-lifting, tile
and plaster removal and for through holes in walls and floors.
It has a radially and axially hinged additional handle.
This allows the user to always set the optimal gripping position.
The rear grip is equipped with vibration damping. This allows
the user to work longer without tiring – even in continuous use.

DH 5 SDS-max
Demolition hammer, 5 kg, SDS-max
• Very handy and compact L-design 1050 watt chisel hammer
• With side handle, can be both radially and axially rotated and
vibration-dampened handle
• Ideal for medium-duty chiselling work in concrete and masonry,
especially in walls. Concrete face-lifting, removal of tiles and
plaster and knocking-through in walls and floors
SPECIFICATIONS
Blows per minute 3500 rpm
Power input 1050 watt
Single impact energy (EPTA) 6,7 J
Chisel positions 12
Tool fixture SDS-max
Weight 5 kg
Type Order no.
DH 5 SDS-max 365.920
Standard equipment:
1 handle
1 tube of grease
Carry case
5 kg Demolition hammer
The vibration-dampened
and anti-slip handle ensures
a secure hold and eases
strain on the user.
Setting of the 12 chisel
positions.
The additional handle
is axially and radially
adjustable. For an optimum
hold and precision guidance.
11

Screwing and drilling
Accessories CHE 2-26 SDS-plus
SDS 2-plus drill
SDS-plus flat chisel
SDS-plus sharp chisel
12
Drill with 2 solid carbide alloy cutters, reinforcement chamfer
and centering point for easy, precision-point working.
Asymmetrical,high-capacity double conveyor spirals for quick
transfer of the drill dust. Core reinforcement for maximum
energy transfer from hammer drill to drill tip. Vibration-damping
and also conveys more energy to the cutting bit. Ideal for
drilling in concrete, masonry and natural stone.
Diameter in
mm
Length
in mm
QP Order
no.
4 110 1 367.931
5 110 1 367.958
6 110 1 367.966
5 160 1 367.974
6 160 1 367.982
8 160 1 367.990
10 160 1 368.008
12 160 1 368.016
6 210 1 368.024
8 210 1 368.032
10 210 1 368.040
12 210 1 368.059
14 210 1 368.067
16 210 1 368.075
8 260 1 368.083
10 260 1 368.091
12 260 1 368.105
14 260 1 368.113
16 310 1 368.121
18 200 1 368.148
20 200 1 368.156
18 450 1 368.164
20 450 1 368.172
22 450 1 368.180
25 450 1 368.199
Extremely hard, ideal for demolition work.
Designation Dimensions
in mm
Extremely hard, ideal for demolition work.
QP Order
no.
flach 20 x 250 1 368.490
Designation Dimensions
in mm
QP Order
no.
spitz 250 1 368.504
SDS-plus broad-flat chisel
SDS-plus tile chisel
Chisel/drill set SDS-plus
The broad flat chisel is excellent for stripping plastered walls.
Higher removal rate due to wedge effect. More material removal
per chisel stroke.
Designation Dimensions
in mm
The tile chisel is suited for renovation work. It has a large leaf
width, can be optimally placed in joints and also preserves the
underground.
Set consisting of:
SDS 2-plus drills
1x 5 Ø x 110 mm,
1x 6 Ø x 110 mm,
1x 6 Ø 160 mm,
1x 8 Ø x 160 mm,
1x 10 Ø x 160 mm,
1x sharp chisel SDS-plus 250 mm,
1x flat chisel SDS-plus 250 mm.
QP Order
no.
spat 40 x 250 1 368.512
Designation Dimensions
in mm
QP Order
no.
gekröpft 40 x 250 1 368.628
Quick-release drill chuck for CHE 2-26 SDS-plus
SDS-plus adapter
Diameter in
mm
Adapter for 1/2“ drill chuck (Order No. 272.639).
QP Order
no.
1 368.571
QP Order
no.
1,5-13 1 272.639
QP Order
no.
1 368.652

Accessories CHE 5-45 SDS-max
SDS 2-max drill
SDS 4-max drill
Drill with 2 sharp carbide cutters. For drilling in concrete,
masonry and natural stone.
Diameter in
mm
Length
in mm
QP Order
no.
12 340 1 368.202
14 340 1 368.210
15 340 1 368.229
12 340 1 368.237
14 540 1 368.245
15 540 1 368.253
The drill tipped 4-cut head design ensures centric guidance
in the drill hole. Two additional secondary cutters protect the
drill from impacting on any steel reinforcement. Moreover, the
special spiral design reduces vibrations. Highly suitable for
drilling in reinforced concrete.
Diameter in
mm
Length
in mm
QP Order
no.
16 340 1 368.261
18 340 1 368.288
20 320 1 368.296
22 320 1 368.318
25 320 1 368.326
28 370 1 368.334
30 370 1 368.342
32 370 1 368.350
35 370 1 368.369
16 540 1 368.377
18 540 1 368.385
20 520 1 368.393
22 520 1 368.407
24 520 1 368.415
25 520 1 368.423
28 570 1 368.431
30 570 1 368.458
32 570 1 368.466
35 570 1 368.474
40 570 1 368.482
Designation Dimensions
in mm
Screwing and drilling
Accessories CHE 5-45 DH 5 SDS-max
SDS-max flat chisel
SDS-max sharp chisel
SDS-max broad-flat chisel
SDS-max tile chisel
SDS-max chisel set
Extremely hard, ideal for demolition work.
QP Order
no.
flat 25 x 400 1 368.539
Extremely hard, ideal for demolition work.
Designation Dimensions
in mm
QP Order
no.
pointed 400 1 368.547
The broad flat chisel is excellent for stripping plastered walls.
Higher removal rate due to wedge effect. More material removal
per chisel stroke.
Designation Dimensions
in mm
QP Order
no.
spat 50 x 400 1 368.555
The tile chisel is suited for renovation work. It has a large leaf
width, can be optimally placed in joints and also preserves the
underground.
Designation Dimensions
in mm
QP Order
no.
cambered 50 x 300 1 368.563
Set consisting of 1x sharp chisel 400 mm SDS-max, 1x flat
chisel SDS-max 25 x 400 mm.
QP Order
no.
1 368.601
13

Core drilling
Drilling where low noise, no dust or vibration is requested, is
where the FLEX core drilling technology comes into its own.
Without vibration, a concrete core is cut out with absolute
precision - even reinforcing bars pose no problem. Ideal for
drilling and through hole work in sensitive areas, such as
hospitals, laboratories, computer facilities, office buildings
and schools, etc.
With our range of dry and wet core drills and the complementary
accessory range, we provide you with the tools for
effective, low-vibration and economical working.
The innovative extraction
system in conjunction
with the FLEX
VCE 45 M AC reduces the
production of healthharmful
drilling dust
to a minimum.
Centring star for pinpoint
accuracy. To ensure the
optimum positioning of
the centring bar in each
drill bit, the FLEX accessory
programme includes
the matching centring
star.
Quick-Snap-System
Only the FLEX Quick-snap system with its removable
extractor ring allows work to be done with and without dust
extraction using the same basic holder. Core bits: no special
core bits are required. All core bits with a standard M16
thread can be used. (Special core bits are needed when dust
extraction is used.)
1 M16 thread core bits are used with the Quick-Snap system.
2 The drill bit chuck allows drill bits to be replaced without the use of a
chuck key.
3 Comprising of a removable extraction ring and the basic holder. Forextracting
health-harmful dusts and increasing tool life.
4 The rotating adapter is used with the extractor ring for connection to the
FLEX vacuum cleaners when drilling.
1 2
4
3

BH 612 VR BH 812 VV
2-speed core drill for dry drilling
• VR microprocessor control: with tachogenerator constant speed
control, soft start, continuous speed control trigger, restart
protection after power failure, overload protection, temperature
monitoring and speed selection
• Long additional handle: turns and latches in pre-set positions to
absorb high torque in freehand operation
• Safety slip clutch: offers protection if the core drill is jammed
• Clamping neck: 53 mm, suitable for application in drilling stands
• Mechanical 2-speed gear unit and variable, electric speed setting
provide optimum speeds for a wide range of drilling diameters
• Ideal for dry drilling
SPECIFICATIONS
Power input 1500 watt
Power output 1000 watt
Machine connection 5⁄8“-16 UN
Speed under load
1st/2nd gear
0-1000 /
0-2500 rpm
Max. drilling Ø masonry 120 mm
Weight 4,1 kg
Type Order no.
BH 612 VR 333.255
Standard equipment:
1 handle
1 open-ended wrench SW 22
1 drill depth stop
1 clamp fitting with ratchet clip
1 plastic carry case
Core drilling
Core drill for dry drilling
• VV electronic control: constant speed control, soft start
with continuous speed control trigger, overload protection,
temperature monitoring and speed selection
• Long additional handle: turns and latches in pre-set positions to
absorb high torque in freehand operation
• Safety slip clutch: offers protection if the core drill is jammed
• Clamping neck: 53 mm, suitable for application in drilling stands
• Ideal for dry drilling
• Mechanical 2-speed gear unit and variable, electric speed setting
provide optimum speeds for a wide range of drilling diameters
SPECIFICATIONS
Power input 1800 watt
Power output 1200 watt
Speed under load
1st/2nd gear
0-1000 /
0-3800 rpm
Tool fixture 5⁄8“-16 UN / M 16
Max. drilling Ø masonry 180 mm
Weight 4,2 kg
Type Order no.
BH 812 VV 260.190
Standard equipment:
1 handle
1 open-ended wrench SW 24
1 open-ended wrench SW 22
1 wrench case
1 drill depth stop
1 clamp fitting with ratchet clip
1 adapter 5/8“-16UN/M16
1 plastic carry case
15

Core drilling
Accessories BH 612 VR, BH 812 VV
Diamond drill bit with dust extraction, universal
16
Dry, M 16 internal thread, for masonry, with
dust extractor for quick-snap system, useful
length 80 mm.
Diamond drill bit with dust extraction, abrasive
Dry, M 16 internal thread, for masonry, with
dust extractor for quick-snap system, useful
length 80 mm.
Diamond drill bit with dust extraction, specially soldered
Dry, M 16 internal thread, for dense sand-lime
bricks, with dust extractor for quick-snap
system, useful length 80 mm.
Diamond drill bits with dust extractor for Quick-Snap
Suction rotor Quick-Snap
Drill adapter Quick-Snap
Centering mount Quick-Snap
suitable
– not suitable
Dry, M 16 inner thread, for masonry, with dust
extraction for Quick-Snap system, effective
length 400 mm.
Extracts health-hazardous dusts and thereby
increases the drill bit‘s service life. Connection
for standard drill bits M 16, by tool-free
drill bit exchange. Light rotor with excellent
suction power; dry drilling is also possible
with the same system without extraction.
Quick and simple cleaning by tool-free
removal of the suction unit. Connection
dimensions 5/8“ UN 16. Consisting of: Rotor
and 1 drill adapter 340.235.
For screwing onto the drill bits / drill bits for
socket outlets. Connection: M 16.
Diamond drill bit for socket outlets, magnetic
with drill.
Diameter in mm Segments QP Order no.
BH 612 VR
BH 812 VV
68 Ø 3 1 349.062
82 Ø 4 1 349.070
68 Ø 3 1 349.100
82 Ø 4 1 349.119
68 Ø 3 1 349.127
82 Ø 4 1 349.135
68 Ø 1 349.143
102 Ø 1 349.151
152 Ø 1 349.178
1 340.243
1 340.235
1 340.227

Accessories BH 612 VR, BH 812 VV
Centering bar Quick-Snap
Centering star Quick-Snap
For diamond drill bits, effective length
400 mm, magnetic with drill. Without
centring star.
For centring bar 340.200, fits drill bit
Ø 68 mm.
For centering bar 340.200, fits drill bit
Ø 102 mm.
For centering bar 340.200, fits drill bit
Ø 152 mm.
Suction adapter for Quick-Snap
Adapter
Adapter 32/36 mm, can be rotated, tapered,
hard. To connect the 32 mm hose with the
suction rotor 340.243
Adapter 5/8“-16 UN to M 16 for connecting
the machine directly to the drill bit.
Centering aid with clamp fitting
Extension for centering aid
Plastic multi-carrying case
For drill bits with an effective length of
180 mm.
For drill bits with an effective length of
400 mm.
Perfect fitting, impact resistant carrying
case for LD 3206 C, BH 612 VR, BHI 822 VR,
BHW 812 VV, BH 812 VV, SR 602 VV, SK 602 VV.
Core drilling
Diameter in mm QP Order no.
BH 612 VR
BH 812 VV
1 340.200
68 Ø 1 340.162
102 Ø 1 340.146
152 Ø 1 340.111
1 340.081
1 255.424
1 259.491
1 255.468
1 329.908
17

Wall chaser
The FLEX wall chaser.
It does you a good turn.
Cutting slots with 2 parallel running FLEX high-performance
diamond cutting discs. The middle partition can then be
broken out using the supplied slot breaker.
Only the FLEX wall chaser allows changeover from vertical
pull cutting to horizontal push cutting. Unlock, swivel
the motor, lock - finished! Fatigue-free working in both
directions!
Powerful in every position. The wall chaser MS 1706 FR cuts grooves
effortlessly into walls, limestone and porous concrete. Its patented,
swivelling motor makes horizontal push cutting as well as vertical
pull cutting possible.
Arbeitsrichtung
Arbeitsrichtung
Arbeitsrichtung
It does not matter in which direction
you are cutting. The swivelling vacuum
hose adapter allows for hinderence
free working.
The disc guard can be opened and the
quick-clamp nut loosened without
any additional tools. In this way you
can change the diamond cutting discs
and quickly adjust the distance rings
according to the desired groove width.
Patented swivel-mounted motor
(EP1693169) allows for push and pull
cutting.
You can use the scale - which is divided
into 5 mm increments - on the disc
guard to set how deep the milled cut
should be.
MS 1706 FR Set
Wall chaser for push and pull cutting
• FR electronic control: with tachogenerator constant speed control,
soft start, overload protection and temperature monitoring
• Patented swivel-mounted motor (EP1693169) allows for push
and pull cutting.
• Optimal dust extraction and maximum safety due to enclosed
guard
• Tool-free blade changing and slit width adjustment
• Rotating adaptor for dust extractor
• Tool-free cutting depth adjustment
• Plunge cut stop
• Chases two parallel slots up to 35 mm deep and 30 mm wide
• Slot breaker for easy removal of the remaining material without a
hammer
• This machine is also available in 110 V
SPECIFICATIONS
Cutting depth 0-35 mm
Groove width 10-30 mm
Disc Ø 140 mm
No load speed 7500 rpm
Power input 1400 watt
Power output 950 watt
Tool fixture M 14
Weight 4,6 kg
Type Order no.
MS 1706 FR Set 329.673
Standard equipment:
2 Diamantjet VI-Speedcut-cutting
disc 140 mm Ø
1 side handle
1 SDS-Clic quick-clamp nut M 14
Distance spacers
Stacking discs
Clamping flanges
1 web remover
1 adapter for dust extractor
Cable clip
1 plastic carry case

LE 9-10 125 L 3906 C
Universal 900 watt angle grinder, 125 mm
• Microprocessor electronics: with tachogenerator constant speed
control, speed control, soft start, restart protection after power
failure, overload protection and temperature monitoring
• Motor: powerful, strong motor for quick working progress
• With double winding protection from metal dust; reduces motor
wear and lengthens service life
• Tool-free adjustment of safety guard
• Side handgrip
• This universal angle grinder is suited for steel/metal surface
finishing, for work on the site/renovation as well as for vehicle
bodywork and construction firms
• Kickback stop - this shuts down the motor on the disc being
blocked
SPECIFICATIONS
Max. disc diameter 125 mm
No load speed 6000-10000 rpm
Power input 900 watt
Power output 500 watt
Tool fixture M 14
Weight 1,9 kg
Type Order no.
LE 9-10 125 350.672
LE 9-10 125 in case 378.313
Standard equipment
LE 9-10 125:
1 guard 125 Ø
1 handle
1 clamping flange
1 clamping nut M14
1 pin wrench
Standard equipment
LE 9-10 125 in carry case:
1 guard 125 Ø
1 handle
1 clamping flange
1 clamping nut M14
1 pin wrench
1 plastic carrying case with insert
Angle grinder
2100 watt angle grinder, 230 mm
• Highly efficient and resilient motor for more power output
• Electrical surge protection: for a soft start without power
overloading
• Optimized dust protection of the motor and the gearbox
• Switch: with lock-off / lock-on switch
• SoftVib handgrip for reduced vibration can be mounted in three
positions.
• Rear shaft handle with soft padding for secure grip
• Tool-free adjustment of safety guard
• Spindle lock
SPECIFICATIONS
Max. disc diameter 230 mm
No load speed 6500 rpm
Power input 2100 watt
Weight 5,8 kg
Type Order no.
L 3906 C 338.605
Standard equipment:
1 SoftVib handle
1 pin wrench
1 guard 230 Ø
1 clamping flange
1 clamping nut M14
19

www.flex-tools.com
FLEX. The original.
Since 90 years, Stuttgart-based FLEX has been known as a manufacturer of highquality
power tools. This is one of the secrets of our success: We are closely aligned
with the requirements of craftsmen. This results in products that are famous for their
long service life, performance and high functionality in many industries.
For more, see www.flex-tools.com
Your specialist retailer
This means performance: the high-speed
angle grinder - a FLEX invention
For more information on our new
cordless drill driver and rotary hammer
drills refer to your competent
specialist!
For exact directions, contact us per
phone +49 (0) 7144 828-0 or
by email: info@flex-tools.com
FLEX-Elektrowerkzeuge GmbH, Bahnhofstraße 15, 71711 Steinheim, Germany, Phone + 49 (0) 7144 828-0, Fax + 49 (0) 7144 25899, www.flex-tools.com
02-2012 / The fittings of the machines correspond to the usual standard equipment. Technical specifications
are subject to change without prior notice. FLEX accepts no responsibility for mistakes and printing errors.