Appendix to Handbook - Chemical Anchor

More documents

Recommendations

Info

Page 9 of allgemeine bauaufsichtliche Zulassung Z-21.3-1808 of 31 October 2005 English translation by DIBt 4.5 Monitoring of working When making anchorages, the contractor hired to do the work, or the construction supervisor appointed by the contractor or a qualified representative of the supervisor must be present at the construction site, and must ensure the proper performance of the work. During anchoring, the construction supervisor or his representative must note down the nature of the anchorage base (type of masonry, compressive strength, and mortar group), the temperature in the anchorage base, and the proper insertion of the anchors. These records must be kept available at the construction site during construction and must be submitted to the responsible construction inspectors on request. Like the delivery note, they must be retained by the contractor at least five years after construction is completed. Feistel
Anchor as installed in perforated brick masonry Anchor as installed in solid brick masonry Henkel KGaA Henkelstrasse 31 40191 Düsseldorf Phone: +49-21-11-797-0 Fax: +49 -21-11-798-330 Pattex Composite Anchor System CF 800 Installed condition Annex 1 of allgemeine bauaufsichtliche Zulassung Z-21.3-1808 of 31 October 2005
Page 1: Chemical Anchor Appendix July 2008
Page 4 and 5: D E U T S C H E S I N S T I T U T F
Page 6 and 7: Page 3 of allgemeine bauaufsichtlic
Page 14 and 15: Anchor rod M8, M10 Marking: Plant s
Page 16 and 17: Table 3: Permissible loads in [kN]
Page 18 and 19: Table 7: Installation characteristi
Page 20 and 21: Safety Data Sheet according to (EC)
Page 22 and 23: MSDS-No.: 210207 V001.0 Pattex CF 8
Page 26 and 27: Safety Data Sheet according to (EC)
Page 33 and 34: Appendix Technical Documents Chemic
Page 35 and 36: MSDS-No.: 210001 V001.2 Hazardous c
Page 47 and 48: Appendix Technical Documents Chemic
Page 57 and 58: Anchor as installed in perforated b
Page 59 and 60: Table 2: Materials Part Designation
Page 61 and 62: Table 6: Permissible bending moment
Page 63:
Appendix Technical Documents Chemic
Page 99:
Page 131:
Page 157:
Page 186 and 187:
Safety Data Sheet according to (EC)
Page 188 and 189:
MSDS-No.: 210456 V001.1 Pattex CF 1
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
show all

Appendix to Handbook - Chemical Anchor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?