Appendix to Handbook - Chemical Anchor

More documents

Recommendations

Info

Table 3: Permissible loads in [kN] for tensile and shear loading and oblique tensile load at any angle immediately at the anchorage base. The maximum loads of Table 4 introduced into an individual brick may not be exceeded. Size Solid bricks Perforated bricks 1) M8 M10 ≥ Mz 12 ≥ KS 12 ≥ Hlz 4 ≥ Hlz 6 ≥ Hlz 12 ≥ KSL 4 ≥ KSL 6 ≥ KSL 12 Perm. F 1.7 1.7 0.3 0.4 0.8 0.4 0.6 0.8 [kN] 1) Increasing the permissible loading in perforated bricks under special conditions, see Section 3.2 Table 4: Permissible load in [kN] that may be introduced into an individual brick or by a single anchor Brick format ≤ 3 DF 4 to 10 DF ≥10 DF Without top Max. F [kN] 1.0 1.4 2.0 load With top load Max. F [kN] 1.4 1.7 2.5 Table 5: Waiting period before adding load (The temperature in the anchorage base must not fall below +5˚C during setting) Temperature in anchorage base Setting time in minutes (approximate) ≥ +5˚C ≥ +10˚C ≥ +20˚C ≥ +30˚C ≥ +35˚C (41°F) (50°F) (68°F) (86°F) (95°C) 120 80 45 25 20 Henkel KGaA Henkelstrasse 31 40191 Düsseldorf Phone: +49-21-11-797-0 Fax: +49-21-11-798-330 Pattex Composite Anchor System CF 800 Permissible loading Setting times Annex 4 of allgemeine bauaufsichtliche Zulassung Z-21.3-1808 of 31 October 2005
Table 6: Permissible bending moments of anchor rods in [Nm] Anchor size M8 M10 Galvanized steel 10.7 21.4 Strength class 5.8 Stainless steel 1.4401 / 1.4571 Strength class A 4-70 12.1 24.1 Cleaning brush Building component dimensions Henkel KGaA Henkelstrasse 31 40191 Düsseldorf Phone: +49-21-11- 797-0 Fax: +49-21-11-798-330 Pattex Composite Anchor System CF 800 Permissible bending moments Cleaning brush Building component dimensions Annex 5 of allgemeine bauaufsichtliche Zulassung Z-21.3-1808 of 31 October 2005
Page 1: Chemical Anchor Appendix July 2008
Page 4 and 5: D E U T S C H E S I N S T I T U T F
Page 6 and 7: Page 3 of allgemeine bauaufsichtlic
Page 14 and 15: Anchor rod M8, M10 Marking: Plant s
Page 18 and 19: Table 7: Installation characteristi
Page 20 and 21: Safety Data Sheet according to (EC)
Page 22 and 23: MSDS-No.: 210207 V001.0 Pattex CF 8
Page 26 and 27: Safety Data Sheet according to (EC)
Page 33 and 34: Appendix Technical Documents Chemic
Page 35 and 36: MSDS-No.: 210001 V001.2 Hazardous c
Page 47 and 48: Appendix Technical Documents Chemic
Page 57 and 58: Anchor as installed in perforated b
Page 59 and 60: Table 2: Materials Part Designation
Page 61 and 62: Table 6: Permissible bending moment
Page 63: Appendix Technical Documents Chemic
Page 99:
Appendix Technical Documents Chemic
Page 131:
Page 157:
Page 186 and 187:
Safety Data Sheet according to (EC)
Page 188 and 189:
MSDS-No.: 210456 V001.1 Pattex CF 1
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
show all

Appendix to Handbook - Chemical Anchor

Create successful ePaper yourself

Delete template?

Save as template?