Large Diameter Stepped Coupling

IMPORTANT NOTICE
The technical, performance data, specifications, dimensions and all other information published in the Design Data section supersede all previously
published information. All data contained herein is subject to change without notice.
The information given in the following pages is intended as a general guide to the proper design and installation of practical piping systems using Viking
Johnson products, and is not intended as a substitute for competent, professional advice, which should always be sought in the design of any piping
system. Good piping practice should always prevail and recommended design pressures, temperatures, tolerances and loads should never be exceeded.
Special conditions often exist for which the information given here is not specifically suited and specialist engineering advice should be obtained. As with
any other piping system, the specific advantages and limitations of Viking Johnson products should be considered when designing a system using Viking
Johnson products. The suggestions made here do not set out to give specific solutions to actual installation problems but to give ideas on which to base
your own unique solutions.
While every effort has been made to ensure its accuracy, Viking Johnson make no express or implied warranty of any kind in respect of the information
contained in this brochure or the materials referred to herein. Any person making use of the information contained here does so entirely at their own risk
and assumes any and all liability resulting from such use.
The information contained within this section applies specifically to Viking Johnson products only, and is not intended to apply to any other bolted sleeve
type coupling product.
© 1999 by Viking Johnson. Printed in the United Kingdom. No part of this booklet may be reproduced, stored or transmitted, in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without prior permission of Viking Johnson.
© Viking Johnson 1999 Tel: +44 (0)1462 443322 Fax: +44 (0)1462 443311
e-mail: info@vikingjohnson.co.uk