Loreley Mk III User Manual - German Physiks

3. ASSEMBLING YOUR LOUDSPEAKERS
Introduction
Because of the complexity of the Loreley, customers are strongly requested not to attempt to assemble
or set up the loudspeakers on their own. These tasks will be carried out by the supplying dealer who has
received detailed training from German Physiks engineers. Many of the component parts are very heavy
and personal injury could result if they are inappropriately lifted. Component parts could also be
damaged by inexpert handling and any resulting damage would not be covered by the warranty.
The following description of the assembly process is for general information only. It is not intended to be
used as a guide for assembling the loudspeakers, as it has been simplified for the sake for clarity.
Please refer to figure 1 to familiarise yourself with the major components.
We will describe the assembly process for the left loudspeaker. This has its two 12 inch drivers located
on the right side of the woofer modules, as can be seen in figure 2 below.
Left Loudspeaker
Right Loudspeaker
Figure 2. Loreley Front View
5