EXPOFLEX 130
EXPOFLEX 130
EXPOFLEX 130
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>EXPOFLEX</strong> <strong>130</strong><br />
FLEXO PHOTOPOLYMER PLATEMAKING EQUIPMENT - ESPOSURE UNIT<br />
AZ Srl – “Il Girasole” Palazzo Donatello 8/07 – 20084 Lacchiarella (MI) – ITALY<br />
E-Mail: info@degraf-group.com – Internet: www.degraf-group.com<br />
Tel.: +39 02 900 90 180 – Fax: +39 02 900 90 149
TECHNICAL DATA<br />
Plate size:<br />
System functions:<br />
Power supply:<br />
100 x <strong>130</strong> cm<br />
back, main and post- exposure with UVC, drying<br />
380V - 3 phases + neutral – 4.5 KW<br />
(upon request: 220V – 3 phases)<br />
FEATURES<br />
Exposure: The unit is provided with 21 lamps for the back and main exposure<br />
type TL 80W 10R (150mm). The microprocessor system keeps an internal<br />
memory of the lamps life to help determine when it’s time to replace them.<br />
The vacuum system and the vacuum sheet perfectly hold the negative to the<br />
plate. The temperature of the lamps is controlled by forced air circulation<br />
inside the drawer. If the lid is opened the exposure is stopped until the lid is<br />
closed again.<br />
Post-exposure: the stainless steel drawer is provided with 19 lamps for the<br />
post-exposure type TL 60W 10R and 18 lamps for the UVC exposure type TUV<br />
36W. The microprocessor system keeps an internal memory of the lamps life<br />
to help determine when it’s time to replace them.<br />
Dryer: an even temperature in the four drawers is provided by et heaters<br />
500W ench heaters with a safety switch.<br />
An exhausting system extracts the solvent fumes from the exposure and the<br />
dryer.<br />
Programming: the microprocessor controlled keyboard allows the user to set<br />
up to nine customized programs to control the time of each function: back<br />
exposure, main exposure, post-exposure and UVC, and the temperature of the<br />
dryer. Furthermore, the display shows the value of the vacuum (in Bar) and<br />
the drying time for each drawer.<br />
Green/red warning leds constantly informing about the status of the machine –<br />
acoustic alarm in case of errors and/or misfunctions.<br />
ENG.<strong>EXPOFLEX</strong><strong>130</strong>
WASHFLEX 120<br />
FLEXO PHOTOPOLYMER PLATEMAKING EQUIPMENT - WASHOUT UNIT<br />
AZ Srl – “Il Girasole” Palazzo Donatello 8/07 – 20084 Lacchiarella (MI) – ITALY<br />
E-Mail: info@degraf-group.com – Internet: www.degraf-group.com<br />
Tel.: +39 02 900 90 180 – Fax: +39 02 900 90 149
TECHNICAL DATA<br />
Plate size:<br />
90 x 120 cm<br />
System functions: washout of flexographic plates with solvent<br />
Power supply: 380V - 3 phases + neutral<br />
Pipe fittings: cock with ball valve of 3/8 and 1<br />
FEATURES<br />
Programming: the microprocessor controlled keyboard allows the user to set<br />
up to nine customized programs to control the following functions:<br />
charge/discharge of the solvent in the tank, solvent temperature, water<br />
heating, washout time and replacement of a programmed quantity of used<br />
solvent with new solvent.<br />
Solvent: is charged by mean of a pump with level sensor.<br />
Washout: the stainless steel tank has a capacity of 200 lt. approx. and it is<br />
provided with solvent level indicator. The nylon brushes are assembled on an<br />
adjustable support to suit plates of various thickness. The plate holder,<br />
movable forward, is provided with a clamp to hold the plate. It rotates<br />
alternatively in two directions to ensure an even washout of the plate and it<br />
stops if the lid is opened. If new solvents are used, a coil on the bottom of the<br />
tank can heat them; the computer controls the temperature of the water<br />
running inside the coil.<br />
An exhausting system extracts the solvent fumes<br />
Green/red warning leds constantly informing about the status of the machine –<br />
acoustic alarm in case of errors and/or misfunctions.<br />
ENG.WASHFLEX120
FLEXO 66-86<br />
SOLVENT WASHABLE FLEXO PHOTOPOLYMER PLATEMAKING EQUIPMENT<br />
AZ Srl – “Il Girasole” Palazzo Donatello 8/07 – 20084 Lacchiarella (MI) – ITALY<br />
E-Mail: info@degraf-group.com – Internet: www.degraf-group.com<br />
Tel.: +39 02 900 90 180 – Fax: +39 02 900 90 149
TECHNICAL DATA<br />
Plate size:<br />
66 x 86 cm<br />
System functions: back, main, post-exposure with UVC, washout, drying<br />
Power supply: 380V - 3 phases + neutral – 4.5 KW<br />
(upon request: 220V – 3 phases – 20 Amp)<br />
Pipe fittings: cock with ball valve of 3/8 and 1<br />
FEATURES<br />
Exposure: The drawer is provided with 13 lamps for the main exposure type<br />
TL 60W 10R (120mm), 7 lamps for the post-exposure type TL 60W 10R and 6<br />
lamps for the UVC exposure type TUV 36W. The microprocessor system keeps<br />
an internal memory of the lamps life to help determine when it’s time to<br />
replace them. The vacuum system and the vacuum sheet perfectly hold the<br />
negative to the plate. The lamps and the vacuum surface are cooled by forced<br />
air circulation inside the drawer. If the lid is opened the exposure is stopped<br />
until the lid is closed again.<br />
Washout: the stainless steel tank has a capacity of 100 lt. approx. and it is<br />
provided with solvent level indicator. The nylon brushes are assembled on<br />
springs to have an even pressure on plates of various thickness. The plate<br />
holder, movable forward, is provided with a clamp to hold the plate. It rotates<br />
alternatively in two directions to ensure an even washout of the plate and it<br />
stops if the lid is opened. If new solvents are used, a coil on the bottom of the<br />
tank can heat them; the computer controls the temperature of the water<br />
running inside the coil.<br />
Programming: the microprocessor controlled keyboard allows the user to set<br />
up to nine customized programs to control the time of each function: back<br />
exposure, main exposure, post-exposure and UVC, washout and drying. For<br />
the last two functions it is also possible to set the temperature in °C.<br />
Furthermore, the display shows the value of the vacuum (in Bar) and the<br />
drying time for each drawer.<br />
Green/red warning leds constantly informing about the status of the machine –<br />
acoustic alarm in case of errors and/or misfunctions.<br />
Dryer: the two drawers are provided with three 500W heaters, forced air<br />
circulation and safety switch.<br />
An exhausting system extracts the solvent fumes from the washout, the<br />
exposure and the dryer.<br />
ENG.FLEXO66-86
DG-FLEX TOWER<br />
Specification: DG-FLEX 35 & DG-FLEX 66<br />
• Washout:<br />
• Flat brush mounted on springs.<br />
• Alternative orbital movement of plate holder.<br />
• Tank capacity 20 liters. / 100 liters<br />
• Solvent level sensor.<br />
• Solvent heater.<br />
• 10 memory channels.<br />
• (Optional : semi automatic solvent replenishment)<br />
• Exposure:<br />
• 9 UVA lamps 40w 10/R./ 13 UVA lamps 60w 10/R<br />
• Vacuum level on display.<br />
• Cooling fan.<br />
• 9 memory channels.<br />
• Light Finisher: (+Post- exposure for A1 model)<br />
Technical data:<br />
Dimensions (w x l x h) :<br />
870 x 840 x 1280 mm<br />
1480 x 1120 x 1400 mm<br />
DG-FLEX TOWER<br />
• 10 UVC Lamps 15w / 6 UVC 36w + 7 UVA 60w 10/R.<br />
• Control light for each lamp.<br />
• 9 memory channels.<br />
• Exhaust system.<br />
Weight :<br />
Power supply :<br />
180 Kg<br />
380 Kg<br />
230V 1Ph / N / PE 50/60Hz 2.8 kW 13 A<br />
400V 3Ph / N / PE 50/60Hz 4.5 kW 12 A<br />
• Dryer:<br />
230V 3Ph / PE 50/60Hz 4.5 kW 20 A<br />
• 2 drawers.<br />
• Heating element 2 x 1000w / 2 x 1500w.<br />
• Exhaust system.<br />
Maximum plate size :<br />
Plate thickness :<br />
14 x 20 inches / 350 x 500 mm.<br />
26 x 34 inches / 660 x 860 mm<br />
Up to 0,276 inches / 7 mm.<br />
DEGRAF srl 8-03B IL GIRASOLE 20084 LACCHIARELLA MILANO ITALY Fax + 39 02 90 09 01 96 Tel. +39 02 90 09 01 64 www.degraf-group.com<br />
02-200