WEBCAST AUCTION - Hilco Industrial

HILCO
WEBCAST AUCTION
Equipment surplus to
ongoing needs of
Cinetic Landis Corp.
Sale is being held in conjunction with
AUCTIONEERS • LIQUIDATORS • APPRAISERS
21700 Northwestern Hwy • Suite 1180
Southfield, Michigan 48075-4923
Ph 248.569.9781 • Fx 248.569.9793
www.maynards.com
Hilco Industrial, LLC
Auctioneers • Liquidators • Appraisers
31555 West Fourteen Mile Road, Suite 207
Farmington Hills, Michigan 48334
Ph 248.254.9999 • Fx 248.254.9995
www.hilcoind.com

HILCO WEBCAST AUCTION
Equipment surplus to the ongoing
needs
TWIN PALLET MACHINING CELL
Cinetic Landis Corporation
TUESDAY, NOVEMBER 18TH
Beginning at 10am Local Time
Preview Date
Monday, November 17th
9am to 4pm Local Time
Auction & Preview Location
20 E. 6th Street
Waynesboro, PA 17268
Directions to Sale
From Baltimore-Washington International Airport (BWI)
Approximately 83 Miles) Start out going east toward I-195 W.
Stay straight to go onto I-195 W. Go 4.2 miles and merge onto
I-95 N via exit 4A toward I-695/Baltimore. Go 2.2 miles merge
onto I-695 N/Baltimore Beltway Inner Loop via exit 49B on the
left toward I-70/I-83/Towson. Go 5.3 miles and merge onto
I-70 W via exit 16 toward Frederick. Proceed for 57.5 miles and
merge onto MD-66 N/Mapleville Rd. via exit 35 toward
Smithsburg. Enter next roundabout and take 2nd exit onto
Mapleville Rd/MD-66. Turn right onto MD-64/Smithsburg
Pike/Jefferson Blvd. Continue to follow MD-64/Smithsburg Pike
(Cross into Pennsylvania). MD-64/Smithsburg Pike becomes
PA-997. Turn left onto Broad St. Turn right onto E. 6th St. Watch
for Auction Signs & Parking.
Travel Information
Airlines:
American Airlines . . . . . . . . . . . . 800.433.7300
Northwest Airlines . . . . . . . . . . . 800.225.2525
United Airlines . . . . . . . . . . . . . . 800.241.6522
Delta Airlines . . . . . . . . . . . . . . . 800.221.1212
Southwest Airlines . . . . . . . . . . . 800.435.9792
Hotels:
Comfort Inn . . . . . . . . . . . . . . . . 717.597.8164
Hampton Inn . . . . . . . . . . . . . . . . 240.420.1970
Further Information
• A buyer’s premium will be in effect.
The auction will be conducted in
English, accepting U.S. Currency only.
• Removal Deadline is Friday,
December 5, 2008 with Hours of
Removal between 8am to 4pm Monday
thru Friday. After December 5th at 4pm
buyer will incur a cost of $1,000 daily
for entry into the facility.
• For further information please contact
Taso Sofikitis at 248.569.9781 or
Email taso@maynards.com
• For Payment & Customer Service
please contact: Sandi Neely at
248.254.9999 x16 or Email
sneely@hilcoind.com
TWIN PALLET MACHINING CELL
CONSISTING OF (2) GIDDINGS & LEWIS
MODEL ORION 2300 4-AXIS
HORIZONTAL TWIN PALLET
MACHINING CENTERS
TWIN PALLET MACHINING CELL
1 – CELL CONSISTING OF (2) GIDDINGS & LEWIS (K & T) MODEL ORION 2300 4-AXIS HORIZON-
TAL TWIN PALLET MACHINING CENTERS, S/Ns 8691018, 8691017 (1991-92) (Updated &
Retrofitted 1999), Pallet Size 31.5 x 31.5”, Travels: X - 47.2”, Y - 59”, Z – 35.4”, Full B Axis 360 Degree,
8 RPM, Spindle Face to Table Centerline 7.8”- 43.3”, 5000-Lb. Capacity Pallet, 20-5000 RPM, 50-HP
Spindle Drive, CAT 50 Taper, 140 Position Automatic Tool Changer, S/N 90-0261, 16 Tool Shuttle Type
Tool Magazine Loader/Changer, 21-Station Pallet Shuttle System, KT Modular-D Controls, Flood
Coolant, High Pressure Coolant, Thru-Spindle Coolant, Adaptive Milling Controls, Calculated Fixture
Off-Sets, Renishaw Probe, Laser Tool Bar Coder, Dull & Broken Tool Sensor, Solid Tapping, Kenametal
U-Head 2” Travel, New A.B. Drives (1994), (FMS Mgt. Retrofit 1994) Jorgenson Chip Conveyors,
S/Ns A-911023-2 & 911023-1, Coolant Wizard Self-Contained, Coolant Reconditioning System & Parlec
Model Paisettel 320 Auto-Measure Tool Pre-Setter, S/N 72508-1291
2
For more information, visit us on the web @ www.hilcoind.com

TURNING CENTERS • JIG BORER • VERTICAL MACHINING CENTER
GIDDINGS & LEWIS SMARTTURN H15 505
4-AXIS CNC TURNING CENTER
GIDDINGS & LEWIS NUMERILATHE 21-TT,
NC/DNC 4-AXIS TURNING CENTER
SIP SOCIETE GENEVOISE HYDROPTIC-6A GANTRY STYLE PRECISION
JIG BORING & MILLING MACHINE
KEARNEY & TRECKER MILWAUKEE MODEL VB-4 3-AXIS
CNC VERTICAL MACHINING CENTER
CNC TURNING CENTER
1 – GIDDINGS & LEWIS MODEL SMARTTURN H15 505 4-AXIS CNC TURNING CENTER, S/N 5050045
(Retrofit 1999 with G.E. Fanuc) 2-10-Position Turrets, Live Tooling on Upper Turret, Programmable Tailstock,
6.5” Hole Thru Spindle, 63” Between Centers, 24” 3-Jaw Chuck, Power Chuck Wrench, Quill Travel 16”, Jorgenson
Chip Conveyor, S/N A 9315581 (1993), 3/60/480, Maximum Swing Over Slant Bed Ways 30”, Maximum Swing Over
Turret Slide Ways 20”, Maximum Diameter Turned 18”, Maximum Length Turned 32” Long, Tooling Turret Travels,
Upper 12.28” X-Axis Cross 34.96” Y-Axis Long, Tooling Turret Travels, Lower 12.28” X-Axis Cross 34.96” Y-Axis
Long, Steady Rest, 6 1/2” Spindle Bore, Live Tooling
TURNING CENTER
1 – GIDDINGS & LEWIS MODEL NUMERILATHE 21-TT, NC/DNC 4-AXIS TURNING CENTER, S/N 533-37-79,
20” 3-Jaw Chuck, Power Chuck Wrench, 8-Position Upper Tool Turret, 6-Position Lower Facing Turret, Coolant,
60-HP Variable Speed Drive Unit, Jorgenson Chip Conveyor, S/N A-781276, 3/60/480
JIG BORER
1 – SIP SOCIETE GENEVOISE MODEL HYDROPTIC-6A GANTRY STYLE PRECISION JIG BORING & MILLING
MACHINE, S/N 5503, Table Size 43.25” x 33”, Table Travel 40, Table Hydraulic Stroke 38”, Spindle Head Travel 28”,
Quill Travel 12”, Spindle to Table 7-11/16-39.25, Space Between Uprights 43.25, 5-5/16 Drill Diameter,
40 – 2000 RPM Spindle, 8-HP, With PI-5 18” Rotary Tilting Index Table, S/N 7007
2 – ROTOPTIC ROTARY TABLES, 31-3/8”
VERTICAL MACHINING CENTER
1 – KEARNEY & TRECKER MILWAUKEE MODEL VB-4 3-AXIS CNC VERTICAL MACHINING CENTER,
S/N 5586272, Pallet Size 18” x 30”, X – 40”, Y – 27”, Z – 20”, #50 Taper, 40-Position A&C, 50-4000, Flood Coolant,
With SMW Model 2005 Pallet Setup Switch System, 480 V, Jorgenson Conveyor, S/N A 851205 (1980),
KT-Gemini-E Controls, Royal Filtermist Mist Collector
ROTOPTIC
ROTARY TABLES
To schedule an auction, please contact us at 248.254.9999 3

GRINDERS • PRODUCTION MILL • HYDROTEL • BROACH • CMM
GARDNER MODEL 824HYD 12” X 24”
HYDRAULIC SURFACE GRINDER
GALLMEYER & LIVINGSTON GRAND RAPIDS 350
8” X 24” HYDRAULIC SURFACE GRINDER
NIPPEI MODEL FXV-90/480 48” X 48” X 240”
HYDRAULIC SURFACE WAY GRINDER
KEARNEY & TRECKER 530-TF20 HORIZONTAL
PRODUCTION TYPE MILLING MACHINE
CINCINNATI MODEL HYDROTEL 30” SERIES
VERTICAL MANUAL TABLE TYPE MILLING MACHINE
LAPOINTE MODEL 41 HORIZONTAL
HYDRAULIC BROACH
SURFACE & OD
GRINDERS
1 – GARDNER MODEL 824HYD 12” X
24” HYDRAULIC SURFACE
GRINDER, S/N 729.2, With Walker
12” x 24” Electro-Magnetic Chuck,
Incremental Down-Feed, Automatic
Wheel Dresser, Coolant, Filtration
Sludge Drag-out Unit, 3/60/240
1 – GALLMEYER & LIVINGSTON
GRAND RAPIDS MODEL 350 8” X
24” HYDRAULIC SURFACE
GRINDER, S/N 350508 (1975),
With Walker 8” x 24” Electro-
Magnetic Chuck, Incremental Down-
Feed, Automatic Wheel Dresser,
Coolant, Filtration Sludge Drag-out
Unit & 1-Shot Lubrication, 3/60/240
1 – LANDIS MODEL 4R PLAIN 14” X
72” O.D. GRINDER, S/N 852-13, 3-
HP Work Head Motor, 15-HP
Grinding Wheel Motor, Coolant,
Automatic 6” x 24” Wheel Tru Form
Dresser, 14 Wheel Mounts, (6)
Follow Rests, Mitronic Feed System
& Barnes Magnetic Coolant
System, S/N TCSP-8144, 3/60/240
HYDRAULIC
SURFACE WAY GRINDER
1 – NIPPEI MODEL FXV-90/480 48” x 48” x 240”
HYDRAULIC SURFACE WAY GRINDER, S/N 13833
(1982) (Rebuilt 1990), Table Size 35.75” x 193”,
T-Slotted (No Chuck), 22 KW, 1180 RPM Spindle,
Clockwise Wheel Rotation, Grinding Wheel Diameter
510 mm, Width 150 mm, Internal Diameter 254 mm,
Coolant, Filtration/Paper Drag-out System, Self-
Contained Hydraulic Unit, With Daikin Chiller, Mitronic
Feed System, All New Electrics in 1990, Rescraped,
Incremental Down Feed, Universal Hydraulic Dresser, 6”
x 24” Grinding Wheel, With Wheel Mounts, Coolant
System with Paper Filter
PRODUCTION MILL
1 – KEARNEY & TRECKER MODEL 530-TF20
HORIZONTAL PRODUCTION TYPE MILLING
MACHINE, S/N 80-1017-16, Table Size 20” x 96”,
15 – 1500 RPM Spindle Speeds, Outboard Support,
30-HP, With Newall 3-Axis Digital Readout, 3/60/480
HYDROTEL
1 – CINCINNATI MODEL HYDROTEL 30” SERIES VER-
TICAL MANUAL TABLE TYPE MILLING MACHINE,
S/N 5H1V5R-1, Table Size 28” x 83”, Sub-Table Size
24.75” x 78”, 16 -1600 RPM, #50 Spindle Nose, Long.
= 60, Cross = 30, Vertical Spindle 14, Table to Spindle
Nose 12”-26”, With Acu-Rite Model Master-MP, 3-Axis
Digital Readout, Coolant & Dustkop Fume Arrestor
KEYSEATER
1 – BAKER #0 KEYSEATER
LAPPER/POLISHER
1 – GARDNER MODEL 86, 36” LAPPER/
POLISHER, S/N 174-1, Variable Speed Drive
HONE
1 – SUNNEN MODEL LBA550 HORIZONTAL
PRECISION HONE, S/N 53064, With
Tooling, Coolant & Storage Cabinet
BROACH
1 – LAPOINTE MODEL 41 HORIZONTAL
HYDRAULIC BROACH, S/N 41068
CMM
1 – ADCOLE MODEL 1304 CAMSHAFT
GAGE CYLINDRICAL COORDINATE
MEASURING MACHINE, S/N 7197 (1997),
1/10th Micron Resolutions Reads: Center
Deviation – Roundness, Cam Lobe Timing –
Diameter, Concentricity – Run-Out, Profile –
Parallelism, Velocity – Taper
Bid Live in Person or
by Phone Via the Web at
www.hilcoind.com
4 For more information, visit us on the web @ www.hilcoind.com

OPTICAL COMPARATOR • WOOD SHOP • BOOM CRANE • SKID JACKS
ADCOLE 1304 CAMSHAFT GAGE CYLINDRICAL
COORDINATE MEASURING MACHINE
SCHERR TUMICO 22-2500 30” FLOOR
STANDING OPTICAL COMPARATOR
TANNEWITZ GH 36” VERTICAL
WOOD CUTTING BAND SAW
AIR TECHNICAL INDUSTRIES MODEL RBC 6000 SPEW
6000-LB. CAPACITY BOOM CRANE
OPTICAL COMPARATOR
1 – SCHERR TUMICO MODEL 22-2500 30” FLOOR STANDING OPTICAL
COMPARATOR, S/N D 830505
PRECISION & INSPECTION
1 – CUSTOM BUILT BENCH CENTER, 16” x 100” c.c., With Trak Manual Numerical
Control, 2-Axis Digital Readout
Bench Top Granite Surface Plates, Height Stands, T-Slotted Cast Iron Layout Tables,
T-Slotted Cast Iron Layout Plates, Large Cylindrical Align Bars, Cordax Model 3000
CMM With Renishaw TPIS Probe, Bench Centers, Various Size Bench Top Layout
Plates, Large Granite Surface Plates, Stuhr Vertical Bench Centers, Special Test
Fixtures, T-Slotted Risers, Misc. Size Angle Plates, Magnaflux Magnetic Particle
Inspection Machine
WOOD SHOP
1 – TANNEWITZ MODEL GH 36” VERTICAL WOOD CUTTING BAND SAW,
S/N 80063, Table Size 39” x 35.5”, Sub Table 19.5” x 16.5”
1 – STATE MODEL 307 16” DISK SANDER, S/N NA
1 – UNKNOWN TABLE SAW
1 – PORTER 18” JOINER, S/N NA
1 – OLIVER MODEL 399-D 18” PLANNER, S/N 204600
1 – DEWALT MODEL 3486 PANEL SAW, S/N 64770053
1 – HESTON & ANDERSON MODEL 55 SWING-IN STYLE 16” CUT-OFF SAW,
S/N 5, With Roller Conveyor In-Feed & Run-Out Conveyor
VIEW OF HYSTER & LEWIS SHEPPARD
ELECTRIC SKID JACKS TO 8,000-LB.
BOOM CRANE
1 – AIR TECHNICAL INDUSTRIES MODEL RBC 6000 SPEW
6000-LB. CAPACITY BOOM CRANE, S/N 57829, With Big
Joe Model WPST60, 6000-LB. Capacity Electric Transporter,
S/N 354111
SKID JACKS
1 – HYSTER MODEL W80XT 8000-LB. CAPACITY ELECTRIC
SKID JACK, S/N E135H02935U
3 – HYSTER MODEL W60XL 6000-LB. CAPACITY ELECTRIC
SKID JACKS, S/Ns D135U02012K, E135H02133S, N/A
2 – HYSTER W60BF 6000-LB. CAPACITY ELECTRIC SKID
JACKS, S/Ns B135U06498B, B135U06423B
4 – LEWIS SHEPARD MODEL UNK 4000-LB. CAPACITY
ELECTRIC SKID JACKS, S/Ns NA
1 – RAYMOND MODEL 101T-F40L 4000-LB. CAPACITY
ELECTRIC PALLET JACK, S/N 101-96-05255 (1996)
Sale is being held in conjunction with
AUCTIONEERS • LIQUIDATORS • APPRAISERS
www.maynards.com
To schedule an auction, please contact us at 248.254.9999 5

FORKLIFTS • STAKE TRUCK • FLOOR SCRUBBERS • TRACTOR LOADER
CLARK MODEL C5004300 CU
30,000-LB. CAPACITY DIESEL FORK LIFT
HYSTER MODEL H90XL2S 9000-LB. CAPACITY
LP-GAS FORK LIFT
CATERPILLAR MODEL TC100D
10,000-LB. CAPACITY LP-GAS FORK LIFT
HYSTER MODEL S80E 9700-LB. CAPACITY
LP-GAS FORK LIFT
YALE MODEL GLC050K0JUAE083
5000-LB. CAPACITY LP-GAS FORK LIFT
INTERNATIONAL TRANSTAR II C0F4070B DIESEL
CAB-OVER TWIN AXLE STAKE BED TRUCK
FORKLIFTS
1 – CLARK MODEL C5004300 CU 30,000-LB. CAPACITY DIESEL FORK LIFT,
S/N 2030-50-7020CB, OHG, Foam Filled Tires, 144” Maximum Lift Height
1 – CATERPILLAR MODEL TC100D 10,000-LB. CAPACITY LP-GAS FORK LIFT,
S/N 5KB607, OHG, Solid Tires, Side Shift, 136” Maximum Lift Height
1 – HYSTER MODEL S80E 9700-LB. CAPACITY LP-GAS FORK LIFT,
S/N CD04D07542F, OHG, Solid Tires, 122” Maximum Lift Height
1 – HYSTER MODEL H90XL2S 9000-LB. CAPACITY LP-GAS FORK LIFT,
S/N G005007592T, OHG, Solid Tires, Side Shift, 194” Maximum Lift Height
1 – CLARK MODEL C500-80, 6350-LB. CAPACITY LP-GAS FORK LIFT,
S/N 685-94-4975, OHG, Solid Tires, 123” Maximum Lift Height, Fork Positioner
Attachment
1 – CLARK MODEL C500-50 5000-LB. CAPACITY LP-GAS FORK LIFT,
S/N 355-737-4382, OHG, Solid Tires, Side Shift, 130” Maximum Lift Height
1 – HYSTER MODEL S50XL 5000-LB. CAPACITY LP-GAS FORK LIFT,
S/N B187V03662M, OHG, Solid Tires, Side Shift, 187” Maximum Lift Height
1 – YALE MODEL GLC050K0JUAE083, 5000-LB. CAPACITY LP-GAS FORK LIFT,
S/N N383342, OHG, Solid Tire, Side Shift, 190” Maximum Lift Height
1 – HYSTER MODEL W45XT 4500-LB. CAPACITY ELETRIC PALLET JACK,
S/N B215H02555X
1 – BIG JOE MODEL PDR-30-106, 3000-LB. CAPACITY ELECTRIC WALKIE FORK
LIFT, S/N 346548, 106” Maximum Lift Height
1 – RAYMOND MODEL 011-R30-TN 3000-LB. CAPACITY ELECTRIC WALKER FORK
LIFT, S/N 011-78-2742 (1978)
1 – RAYMOND MODEL E2STF-XL 2000-LB. CAPACITY ELECTRIC STAND-UP TYPE
NARROW AISLE FORK LIFT, S/N 810-E2STF-10276
STAKE TRUCK
1 – INTERNATIONAL TRANSTAR II MODEL C0F4070B
DIESEL CAB-OVER TWIN AXLE STAKE BED
TRUCK, VIN#: E2327JGA20256 (1979), 220” Wheel
Base, Approximately 25' Wood Deck Bed
FLOOR SCRUBBERS
1 – TENNANT MODEL 530E ELECTRIC RIDING FLOOR
SCRUBBER, S/N 530-7515
1 – TENNANT MODEL 480 ELECTRIC WALKER TYPE
FLOOR SCRUBBER
1 – FACTORY CAT MODEL 48 ELECTRIC RIDING
FLOOR SCRUBBER, S/N NA
1 – TENNANT MODEL 215E ELECTRIC RIDING FLOOR
SCRUBBER, S/N 215-4589
TRACTOR LOADER
1 – MASSEY FERGUSON MODEL 20 WHEELED
FRONT-END TRACTOR LOADER, VIN# 9AI83290,
With PTO & Wood Model SXT172 Deck Type Lawn
Mower Attachment, Model MF32 Engine, S/N L8100
10552
LAWN TRACTOR
1 – ALLIS CHALMERS MODEL 5015 LAWN TRACTOR,
S/N 9518, With PTO, Woods Deck Type Lawn Mower
Attachment, Kasco Snow Blade & Hero Sure-Feed
Broadcaster Spreader
6 For more information, visit us on the web @ www.hilcoind.com

SUPPORT/SHOP & FACTORY • PARTS • CAFETERIA & OFFICE
STANLEY/VIDMAR ROLLER
BEARING STORAGE CABINETS
VIEW OF CAFETERIA EQUIPMENT
VIEW OF OFFICE FURNITURE
LARGE QUANTITY OF REPAIR & (NEW/USED) REPLACEMENT PARTS
SUPPORT/SHOP & FACTORY
Wood Parts Pallets, Self-Dumping Hoppers, Magnetic Lifting Blocks,
Slings, Chains, Eye Hooks, Eye Bolts, Stanley/Vidmar Roller Bearing
Storage Cabinets, American Down-Acting Cardboard Baler, Tool Holder
Carts, Portable Steel Stairs, Precision Bench Top Digital Platform
Scales, Litton Unit Handling Pick and Storage System, Barnes Drill Co.
Large Capacity Coolant Filtration Systems, With Drag-out, Wood Saw
Hoists, Smog-Hog Model Porta-Clean Portable Smog Arrestor, Baldor
Bench Type Double-End Grinders, U.S. Electric Double-End Grinder,
Ladders, Scaffolding, Cable Type Portable Crane, Portable Electric
Sump Sucker, Beckert & Hiester Model 1X10M&S-6-9V-BA1036 Dust
Collectors, Cantilever Racking
Bench Type Chop Saws, Pines Bench Type Tube Swagers, Trans-Mill
Model TM6675 Bench Type Mill, Greenlee Model 555 Portable Electric
Conduit Bender, Oster Model 774 Portable Power Pipe Machine,
Hermes Manual Pantograph Engraver, Precision Bench Top Drill Press,
Miller Falls Double-End Grinder, Delta Rockwell Model 17-600 16”
Variable Speed Floor Type Drill Presses, Parker Model Paraflange Fluid
Connector Systems, Greenerd #4F1 Floor Standing Arbor Presses,
3-HP Horizontal Tank Mounted Air Compressor, Graco Pro Gun Wash
System, Safety Kleen Model 1107 Paint Spray Gun & Equipment
Cleaner, Paint Shaker, Jenny Model E-2000-C All Electric Combination
Steam Clean Pressure Washer, Karcher Pressure Washer, Lincoln
Model AC/DC 225/125 Welder, Sunnen Model 550 Precision Horizontal
Hone, S/N 53064, Manual Adjustable H-Frame Shop Press, Unknown
Hydraulic Straightening Press, Ridgid Model 535 Portable Power Pipe
Machine, Greenerd #3.5 Floor Type Arbor Press, Diversi-Tech FRED
ICS Portable Smog Arrestor, Hammond Belt Grinder, Hypertherm
Plasma Arc Cutting Systems, Hermes Model Concept 2000 Automatic
Engraving System, Portable Sump Pump Cart & Hose Reel
MISCELLANEOUS
Anvil, Miscellaneous Cleaning Supplies, Miscellaneous Safety Equipment, Dry
Filter Paint Spray Booths, Barrel Dikes, Hand Punch Set & Dies, Hose Reels, Air
Hoses, Shop Vacuums, Parts Carts, Single Door Storage Cabinets, Wood
Tables, Wood Storage Units, Steel Shelving, Pedestal Shop Fans, Wood Parts
Carts, Portable Dust Collectors, Steel Tables With Vises, Steel Coat Racks, Steel
Receiving Tanks, Folding Leg Plastic Work Tables, Folding Metal Chairs, Misc.
Shop Office Furniture, Steel Storage Units, Two Wheel Barrel Dollys, Portable
Parts Storage Racks & Plastic Bins, Water Hose Reels, Stools, Parts Cleaning
Tanks, Test Benches, Quick Connect Rubber Hose, Control Panels, Various Size
Self-Contained Hydraulic Units, Pneumatic Grease Pots, Plastic Garbage Bins,
Hand Tubes Benders, Hard Tools, Electric Drills, C-Clamps, Barrel Pumps,
Conduit Housing, Steel Lockers, Two-Door Flammable Materials Storage
Cabinets, Pump & Filter Carts, Misc. Floor Type Drill Presses, Misc. Floor
Standing Double-End Grinders, Vibratory Bowl Feeders, Folding Brake Room
Tables, Movie Screen, Fire Extinguishers, Chilling Systems, Obulin Pressure
Filtration System, Push Lawn Mowers, Push Snow Blowers, Misc. Cleaning
Supplies, Push Leaf Blower, Acetylene Outfits, Battery Chargers, Electric Hand
Tools, Cordless Tools, Barrel Stands, Chucks, Spindle Support Fixtures,
Machinist Vises
REPAIR & (NEW/USED) REPLACEMENT PARTS
Cables, Wire, Switches, Relays, New & Used Packaged Electronics, New &
Used Electrical Replacement Parts, Various Spools Copper Wire, Multi-Wire
Cable, Drills, Mills, Hardware, Plug Gauges, Tool Holders, Boring Heads
CAFETERIA
1 – SAMSUNG MODEL ER 4940 SINGLE DRAWER ELECTRONIC DIGITAL
CASH REGISTER, S/N 9709320003 (1999)
1 – WELLS MODEL UNKNOWN TWIN BASKET ELECTRIC FRYER, S/N NA
1 – STAR MODEL 548CHS 4-ZONE FLAT GRIDDLE, S/N TS480
1 – GLENCO MODEL SLS-48-T 2-DOOR STAINLESS STEEL
REFRIGERATOR, S/N 7239977
1 – VICTORY MODEL FS-2D-53 2-DOOR STAINLESS STEEL FREEZER,
S/N 0-7917V80
2 – TRAULSEN 2-DOOR REFRIGERATORS
1 – VULCAN HWT VALT MODEL E-60FB 6-BURNER DOUBLE OVEN,
WITH GRIDDLE, S/N 81117055, With Fume Hood
Double Burners, Tyler Open Refrigerator Display, Ice Cream Cooler, Fume Hood,
With Fire Suppression, Cooking Utensils, Pots, Pans, etc.
OFFICE FURNITURE AND EQUIPMENT
Office Furniture Consisting of Executive Office Sets, Bookcases, Credenzas,
Partitioning, Conference Table and Chairs, etc.
To schedule an auction, please contact us at 248.254.9999 7

Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK)
London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)
Hilco Industrial, LLC
Auctioneers • Liquidators • Appraisers
Headquarters
31555 W. Fourteen Mile Road, Suite 207
Farmington Hills, MI 48334
Ph: 248.254.9999
Fx: 248.254.9995
www.hilcoind.com
Presorted
First Class Mail
U.S. Postage
PAID
Detroit, Mich.
Permit No. 100
Forwarding Service Requested
HILCO
WEBCAST AUCTION
Equipment surplus to
ongoing needs of
Cinetic Landis Corp.
HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062
All rights reserved • Printed in USA • CINE • Auctioneer and Licenses: Hilco Industrial # AY000294, Maynards #AY000292,
Jack Washbourn, License #AU005003, Taso Sofitikis, License # AU004074, IL License #444000215
Please visit our website at www.hilcoind.com to review our complete terms and conditions.
Terms of Sale
A buyer’s premium of 13.5% for onsite sales & 16%
for webcast sales is in effect. Everything will be sold
to the highest bidder for cash, in accordance with
the Auctioneer’s customary “Terms of Sale”, copies
of which will be posted on the premises of the sale
and subject to additional terms announced the day
of sale. All items will be sold “as is, where-is” without
any warranties, express or implied. Although
obtained from sources deemed reliable, the
Auctioneer makes no warranty or guarantee to the
accuracy of the information herein contained.
Bidders are encouraged to thoroughly inspect the
items on which they intend to bid prior to sale.
Absolutely no items will be removed until the day
after the conclusion of the sale and payment is made
in full. Subject to additions, deletions and prior sale.
Payment: ALL PURCHASES MUST BE PAID IN
FULL ON THE DAY OF THE AUCTION. If you intend
to pay by wire transfer, we will accept payment the
day after the sale ONLY IF a deposit of 25% of total
purchases is made on the day of the sale. Contact
our office for wire transfer instructions. Only cash,
wire transfer or certified check, payable to Hilco
Industrial, LLC will be accepted. Company checks
payable to Hilco Industrial LLC will be accepted only
if accompanied by a bank letter of guarantee, (see
sample letter below). All sales are subject to sales
tax. Purchasers claiming exemptions from taxes
must provide proof satisfactory to the Auctioneer of
their entitlement to claim such exemptions.
Sample Bank Letter
(Bank Name) unconditionally guarantees
payment to Hilco Industrial, LLC from
(Company Name). This guarantee will be valid
for purchases made at the Auction of Fives
Cinetic on November 18, 2008.