2009 H-D Screamin' Eagle® Pro Racing Parts ... - Harley-Davidson

E. SCREAMIN’ EAGLE PRO TWIN CAM CAST
FLAT TOP STROKER PISTONS – 3-7/8"
G. SCREAMIN’ EAGLE PRO TWIN CAM HIGH
COMPRESSION CAST PISTON KITS – 3-7/8"
F. SCREAMIN’ EAGLE PRO TWIN CAM
HIGH COMPRESSION FORGED PISTON
KITS – 3-7/8" & 3-3/4"
3
E. SCREAMIN’ EAGLE ® PRO TWIN CAM CAST
FLAT TOP STROKER PISTONS – 3-7/8"*
Flat Top Cast Pistons are designed for use with 3-7/8" cylinders.
Kit includes rings, clips and pins. These pistons cannot
be used with “HTCC” heads. All EFI models require ECM calibration*
(priced separately). For race application only.
Fits ’07-later Twin Cam models equipped with 3-7/8"
cylinders.
21966-07 Standard Bore. (pair). $174.95
21967-07 +.005 o/s. (pair). $174.95
21968-07 +.010 o/s. (pair). $174.95
3
F. SCREAMIN’ EAGLE PRO TWIN CAM HIGH
COMPRESSION FORGED PISTON KITS* – 3-7/8" & 3-3/4"
These pistons have been designed to be used with our
Twin Cam Performance Heads and can also be used with
stock cylinder heads. These pistons are forged for higher
RPM capability than cast pistons, and come complete with
rings, wrist pins and clips. These pistons cannot be used
with “HTCC” heads or in Stroker applications. All EFI models
require ECM calibration* (priced separately). For race application
only.
Fits ’99-’06 Twin Cam 1550 models equipped with 3-7/8"
cylinders.
22868-00 Standard Bore. (pair) $279.95
22869-00 +.005" o/s. (pair) $279.95
22870-00 +.010" o/s. (pair) $279.95
Fits ’99-’06 Twin Cam 1450 models with Original Equipment
3-3/4" cylinders.
22864-00 Standard Bore. (pair) $279.95
22865-00 +.005" o/s. (pair) $279.95
22866-00 +.010" o/s. (pair) $279.95
3
G. SCREAMIN’ EAGLE PRO TWIN CAM
HIGH COMPRESSION CAST PISTON KITS* – 3-7/8"
These high compression 10.25:1 cast pistons are designed
for use in a Twin Cam engine equipped with stock cylinder
heads and 3-7/8" cylinders (1550). Piston kit includes
rings, clips and pins. All EFI models require ECM calibration*
(priced separately). For race application only.
Fits ’99-’06 Twin Cam 1550 models equipped with 3-7/8"
cylinders.
22661-99A Standard Bore. (pair) $174.95
22174-99A +.005" o/s. (pair) $174.95
22179-99A +.010" o/s. (pair) $174.95
CAUTION: Cast pistons should not be used when engine speed
is expected to exceed 6200RPM. Failure to comply may result
in engine damage.
3
H. SCREAMIN’ EAGLE PRO TWIN CAM BIG BORE
FLAT TOP CAST PISTON KITS* – 3-7/8"
These Flat Top Cast Pistons are designed for use with 3-7/8"
Big Bore performance cylinders (1550). Kit includes rings,
clips and pins. These pistons cannot be used with “HTCC”
heads. All EFI models require ECM calibration* (priced separately).
For race application only.
Fits ’99-’06 Twin Cam 1550 models equipped with 3-7/8"
cylinders.
22851-99A Standard Bore. (pair) $174.95
22852-99A +.005" o/s. (pair) $174.95
22853-99A +.010" o/s. (pair) $174.95
CAUTION: Cast pistons should not be used when engine speed
is expected to exceed 6200RPM. Failure to comply may result
in engine damage.
H. SCREAMIN’ EAGLE PRO TWIN CAM BIG BORE
FLAT TOP CAST PISTON KITS – 3-7/8"
*Notice: See matrix on page 36 for recommended
cylinder head/piston combinations.
*Recalibration is required for proper installation.
See dealer for details. Labor cost not included.
*NOTE: Always check piston-to-valve clearance with
modified dome pistons and non-stock cam shafts.
NOTE: High Compression Piston applications require
installation of appropriate compression release in
cylinder heads.
3
SCREAMIN’ EAGLE PRO TWIN CAM PISTON KITS
3-7/8"/3-3/4" PISTONS 43
TWIN CAM MODELS