SPRING 2009 - IDX Inc

SPRING 2009 

Distributor & End User Terms & Conditions 

IDX INCORPORATED 

400 West Cedar Street 

El Dorado, Arkansas 71730 

870-862-2051 800-643-1109 

FAX# 870-862-3472 

Web Site www.idxinc.com Email sales@idxinc.com 

TERMS & CONDITIONS: Prices quoted are F.O.B. El Dorado, AR and are subject to change without notice. 

SHIPPING: Orders received by noon will be shipped (if in stock) the following day, except next day or 2 day shipments. 

SPECIAL HANDLING: Same day or next day shipments requests will be charged a $25.00 special handling fee per shipment. 

Drop shipments will be charged a $10.00 special handling fee per shipment. 

PAYMENT TERMS: Net 30 Days. Open account terms are granted to firms with established credit. If credit is not established, 

we accept VISA, Master Card, American Express, Discover Card, or Prepay check, wire transfer or authorized COD shipment. 

Include sufficient funds on check. Open account terms will be terminated in the event of consistent past due invoices or 

insufficient funds on check. IDX does not setup open accounts outside the continental United States. Terms are credit card or wire 

transfer. All “Custom X-Mark Site Specific Tokens & Custom Wickets Cards orders” require a deposit of 50% with order 

and balance upon shipment. 

LEAD TIME: Standard lead-time for all products in the IDX Price List, unless otherwise noted, is 3 to 4 weeks ARO. 

MINIMUN BILLING NOT INCLUDING SHIPPING IS $25.00 PER INVOICE. 

PRICING: Do not advertise below 15% off the List Price. 

RETURNS: A Return Material Authorization (RMA) number must be issued by IDX prior to the return of any goods. That 

number must be clearly marked on the outside of the box of returned merchandise. “Specials” may not be returned. In order to be 

given the highest possible credit on returned goods, the original IDX invoice number must be supplied. All merchandise must be 

returned within 30 days of original IDX invoice date. A restocking fee of not less than 30% plus any repairs will apply. 

WARRANTY: IDX products, except for certain accessories and components, are warranted against defective materials and 

workmanship for one year from the date of manufacture. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR 

IMPLIED. Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them to be 

defective, they will be repaired or replaced without charge, FOB factory. IDX DOES NOT assume any liability for damages. 

IDX DOES NOT warranty products that have been modified or altered from the original manufactured specifications. 

REPAIRS: IDX repairs 98% of all products that have been manufactured by IDX. IDX prefers that warranty repairs go through 

the Authorized IDX Distributor or OEM, since some OEM’S offer an extended warranty. The factory can handle non-warranty 

repairs; A Return Material Authorization (RMA) number must be issued by IDX prior to the return of any goods to be repaired. 

TERMS: Credit Card Only- NO COD’s Credit Card number is required at time of issuing RMA#. 

CANCELLATION: On Blanket orders, IDX reserves the right to manufacture all parts in advance for quantity specified on 

order. In the event of cancellation or change of specification, the customer will be held responsible for the cost involved. Orders 

for Specials CANNOT be cancelled. 

BLANKET ORDER POLICY: Blanket orders are designed to help our customers to obtain minimum quantity discount and 

better deliveries. Such an order will be accepted, subject to the following terms: 

1. Total value shall be for a minimum of $5000.00. 

2. Products may be combined as shown in each product group. Groups cannot be combined. 

3. Scheduled shipments on blanket orders may be scheduled up to 12 months with 5 scheduled shipments. One rescheduling 

is permitted during the life of the order, providing written notice is given to IDX not less than 30 days 

prior to delivery. 

4. The total quantity shall be released within one year of date of order. An invoice will be issued at blanket 

quantity discount, if the total order is not released for shipment within one year. 

5. Special items shall not be grouped with standard items, regardless of any similarity. 

**PRICING SUBJECT TO CHANGE PER MARKET CONDITIONS** 

Page 1

DESCRIPTION PAGE # DESCRIPTION PAGE # 

Circuit Boards 

Digital Displays only 

Big Time Display (P800B-) 27 Accessories for Displays 15,27,28,30,31 

Big Time Two Timer (P902-) 28 Auto Teller – BS820A series 26 

Big Time Two Timer Relay Output (P912-) 28 Big Time BT800B- 26 

Big Time Multi Timer (P907) 28 Big Time Two Timer BT802B- 26 

Big Time Vendor Timer (P912-V) 27 Digital Display for Automatic Blower / Dryer 25 

Dryer Display (P810B) 27 Jumbo Time Display – BS820 series 25 

Dryer Display Timer (PD910) 27 Meter Box Digital Display LTT800- 25 

Jumbo Time Sign (P920-A) 27 Stainless Steel Covers for Displays 28,31 

Jumbo Time Two Timer (P922) 28 Display Accessories 

Coin Counters Big Time EEPROM 27,30 

Electronic (BD200) 23 Big Time Processor 27,30 

Interface 23,25 Big Time Enclosure 27,28,30 

Contact/Relay Module Little Two Timer EEPROM 27,31 

Bill Acceptor Isolated Pulse 6,33 Little Two Timer Processor 27,31 

Coin Pulse Splitter 33,34 Snubbers 18 

Current Transformer 33 Terminal Strips 18 

Dry Contact Relay 33,34 Little Two Timer Housing 31 

Plug-In Relay 33 Big Time LED 27,30 

PS200 3 rd stack Relay 33 Little Two Timer LED 31 

Vendor Relay 14,27,30,34 Freeze Controls 

Credit Card ZOLAR 32 

Readers 6 Foam Blower 32 

Software C/F Light Sensor 32 

Temperature Probe 32 

Decals Antifreeze Timer 24,32 

Big Time 27,30 Fuses 

Jumbo Time 30 Holder 33 

Menu Signs 21 Short Circuit 33 

Meter Box 17,18,19,20, 22 Slow Blow 33 

Demos and Tools Slow Blow Holder 33 

Crimping Tools 34 Heaters 

Lighted Sign Demo 34 Meter Box 17 

Meter Box Demo 34 Horn / Alerts 

Thickness Gauge 34 Coin Beeper & Last Alert 24/120 AC 22,24 

Xeptor Test Stand 34 Last Alert AC 12 – 28VAC 15,27,31 

Digital Clock Timers for Meter Boxes LTT802 Last Alert DC 12 – 28VDC 31 

Little Two Timer Digital Clock LTT802- 14 Replacement Lamps & LED’s 

Little Two Timer Digital Clock –for use w/Credit Card 14 LED Segments for Big Time & Jumbo Time 28,30 

Little Two Timer Digital Vendor Timer – 7 drops 14,27 LED Segments for Little Two Time 31 

Little Two Timer Dryer Timer – LDD910 14,26 Menu Signs Lamp 22 

Little Seven Timer Digital Clock - LTT807 14 Meter Box Lamp 17 

Little Two Timer For Unlimited Time -LTT802-T 14 Ultra Bright LED Segments for Big Time 28,30 

Options for Little Two Timer Display Clock 15 Ultra Bright LED Segments for Jumbo Time 28,30 

Display Timers for Walls & Combo Vac 

Locks 

Accessories for Big Time 15,27,28,30,31 Cam 17 

Big Time Dryer Display Two Timer – DD910 26 Pin 17 

Big Time Multi Timer – BT907 26 Plug 13,17 

Big Time Two Timer – BT902 27 Puck 17 

Big Time Two Timer w/Low Profile S/S Case BT912 27 Screw 17 

Big Time Vendor Timer – BT912-V 9 drops 29 Meter Boxes 

Jumbo Time Two Timer – BT922 29 Accessories 11,12,13 

Gigia Timer Multi Timer 16 Bill Acceptor Meter 10,11 

Giga Timer Accessories 16 Cash Drawer 11 

Credit Card Meters 10,11 

SPECIAL DISPLAY TIMERS Meter Box Demos 34 

BT902-FRAGRA 14,25 Options 11 

LTT802-FRAGRA 14,25 Safe Style 10 

LTT802-RYKO 14,25 Meter Box Accessories 

LTT802-LUCKY 14,26 Decals 17,18,19,20 

BT912-LUCKY 26 Cash Drawers 13 

LST802 14 Service Doors 12 

Vault Doors 13 

Cash box 13 

Page 2

DESCRIPTION PAGE # DESCRIPTION PAGE # 

Meter Box Accessories 

Tokens 

Electronic Rotary Switches ps200 12,22 X-Mark Coded Tokens w/ Hologram Decals 36 

Key Switches 17 X-Mark Coded metal Tokens 35 

Locks 17 TC Security Tokens C/F 

Rotary Switches 17 Non Coded Tokens C/F 

Terminals 18 Transformers 

Wiring Harness 12,13 220/208/120V x 24VAC 100 VA 33 

Motor Delays 220/208/120V x 24VAC 150 VA 33 

High Pressure Pump 33 220/208/120V x 24VAC 40 VA 33 

Low Pressure Pump 32 115V x24vac 300ma for NIGHT ACCESS 33 

Spot free Pump 32 Wickets 

Multiplexer Cards- Configuration 5 

Bladder Tank Replacement 32 Cards – Gift 5 

Low Pressure Controls 32 Cards – Fleet 5 

Multi-Color Brush or Wax System 33 Cards – Service 5 

Remote Control Cards – User 5 

Cable 30 CD Box 5 

IR800 Infrared Remote 22,23,30 HV Box 5 

RC800 22,30 LV Box 5 

Remote Box 30 MDB Box 5 

Software 23,30 Programmer module 5 

Safes Reader 5 

Combination 13 Signs & Decals 5,6,18,20 

Electronic 13 Site License 5 

Keyed 13 Wicket Revalue Stations 

Spare Parts for Safes 13 Revalue & Dispense With Credit Card Only 5 

Signs Revalue & Dispense With Cash Only 5 

Accessories for Frames & Signs 21 Revalue & Dispense w/Cash or Credit 5 

Bay Menu Sign – for 8 Services 20 Changer option w/ 1 or 2 Hoppers 5 

Bay Menu Sign – for 10 Services 20 Changer option w/ 2 Hoppers and Bill out 5 

Instruction Spots 21 Receipt Printer C/F 

Lighted Frames 20 Revalue Station Heater C/F 

Lighted Frame Demo 34 Options C/F 

Stainless Steel Menu Fames 20 Wicket Accessories 

Wicket Instruction 5 Wicket Jackpot Display 6 

Snubber & Terminal Wicket Night Access Standalone Sys 6 

Meter Boxes 18 Wicket Night Access Computer Control Sys 6 

Power Surge Suppressor 18 Wicket Night Access Controller only 6 

Stainless Steel Wicket Redemption & Registration Center 6 

Big Time Covers & Enclosures 28,31 Wicket NAC aluminum box 6 

Menu Frames 20 Control cables & wire 6 

Lighted Frames 20 Power supply 6 

Little Two Timer 28,31 Wire & Cable 

Meter Box 10,11 Big Time to PC 31,34 

Security Bars 17 Computer cables 6,17,34 

Xeptor Faceplate 9 IR800 to PC 22,30,34 

Switches LTT802 Wiring Harness 15,31 

Electronic 10 Position PS200 12, 22 Meter Box Wiring Harness 12,13 

Key Switch 17 Remote Wire 23,28 

Knob 17 Xeptor to PC 34 

Rotary 8 & 10 Position 17 Xeptor Wiring Harness 9 

Timer – Bay & Vacuum 

Xeptors 

Flat Pack 24,25 Bill Acceptors 6 

Plug In 23,24 Coded Metal Token 8,9 

Timer – Display Electronic 7,8 

Meter Box 14,16 Xeptor Accessories 

Wall Mount 26,27 Bill Acceptor Interface Module 6,31 

Timer – Non Display Coin Counter 23 

Accessories 24,25 Coin Cup 9,17 

Antifreeze 24 Coin Switch Sensor 9 

Plug In 23,24 Diverter Faceplate 9 

Two Timer 24 Faceplate – 2 “ Snap-In 9 

Vacuum 115VAC or 24VAC 24 Faceplate – 2” (old style) 9 

Vacuum w/ 24VAC for Coin Xeptor 24 Personality Plug 9 

Vacuum 220VAC w/ 24VAC for Coin Xeptor 24 

Page 3

MODEL 

NUMBER 

INTRODUCING 

NEW FOR 

YEAR 2009 

DESCRIPTION 

**NEW** CASHLESS STORED VALUE PAYMENT SYSTEM 

**WICKETS SV RFID CARDS & READERS 

LIST 

PRICE 

DISC. 

CODE 

WICKETS A WICKET HAS AN RFID (radio frequency identification) TRANSPONDER CHIP & ANTENNA LAMINATED INSIDE THE 1.55 A 

CARDS 

CARD THAT IS POWERED BY RF ENTERGY OF THE READER’S ANTENNA WHEN A CUSTOMER BRINGS A WICKET 

WITHIN ½ INCH OF THE READER. THE READER INTERROGATES THE WICKET, VERIFIES ITS AUTHENTICITY VIA AN 

ENCRYPTED HANDSHAKE, CHECKS IT FOR THE CORRECT SITE ID, AND ACCESS THE ACCOUNT BALANCE STORED 

ON THE WICKET USING AN ENCRYPTED PASSWORD. THERE IS NO CENTRAL SERVER REQUIRED, THE ACCOUNT 

BALANCE IS ON THE WICKET. WICKETS ARE MADE IN A FORM OF A CREDIT CARD, OR A KEYFOB EASILY ATTACHED 

TO A KEY RING 

WR88 THE WICKET READER IS HOUSED IN A SEALED ¾” THREADED TUBULAR BODY 2.1” LONG WITH A 1.1” DIAMETER FACE. 461.54 B 

READER & READING RANGE IS APPROXIMATELY ½”. A WICKET IS EASILY READ BY TAPPING THE WICKET’S CIRCLE-W ICON ON 

INTERFACE BOX THE READER FACE FOR A FRACTION OF A SECOND. THE NORMALLY BLUE ILLUMINATED FACE OF THE READER 

CHANGES TO OTHER COLORS TO INDICATE THE STATUS OF A TRANSACTION OR THE STATUS OF THE EQUIPMENT. 

THE EXCEEDINGLY SMALL FOOT PRINT OF THIS READER ALLOWS IT TO BE ADDED TO MOST EXISTING EQUIPMENT 

WITHOUT THE NEED FOR ADDITIONAL BOXES. 

**WICKETS READER** 

WR88 STORED VALUE WICKET READER USED IN THE CAR WASH, LAUNDRY, AMUSEMENT INDUSTRIES $337.94 B 

**INTERFACE MODELS** 

FOUR INTERFACES ARE AVAILABLE TO CONNECT THE WICKET READER TO DIFFERENT MANUFACTURES EQUIPMENT 

AND PROVIDE IT WITH POWER. THEY INCLUDE 2 DIFFERENT “COIN PULSE” OUTPUT MODULES A LOW VOLTAGE 12/24 

VAC/VDC, & A HIGH VOLTAGE 110/240 VAC, AN MDB INTERFACE FOR CHANGERS AND VENDING MACHINES AND THE 

IDX CARD-DISPLAY INTERFACE FOR DIRECTLY CONNECTING TO IDX DISPLAY- TIMERS. 

WK-CD MODULE WICKET INTERFACE BOX THAT COMMUNICATES DIRECT TO IDX DISPLAY TIMER VIA “CARD DISPLAY protocol” $123.60 B 

WK-HV MODULE WICKET INTERFACE BOX THAT CAN BE CONNECTED TO A VACUUM OR ANY OTHER DEVICE THAT IS POWERED BY $123.60 B 

HIGHER VOLTAGES –70VAC TO 120 VOLTS- WITH A PROGRAMMABLE COIN PULSE OUTPUT 

WK-LV MODULE WICKET INTERFACE BOX THAT CAN BE CONNECTED TO ANY TIMER OR OTHER DEVICE THAT IS POWERED BY LOWER $123.60 B 

VOLTAGES –12VAC TO 28VAC OR 12VDC TO 35VDC- WITH A PROGRAMMABLE COIN PULSE OUTPUT 

WK-MDB WICKET INTERFACE BOX TO CONNECT TO STANDARD CHANGE MAKER’S CHANGERS AND TO VENDING MACHINES $123.60 B 

MODULE 

**REVALUE STATION by STANDARD CHANGE MAKERS** 

A HEAVY DUTY STAINLESS STEEL REAR LOAD CABINET TO DISPENSE AND REVALUE WICKETS CARDS. THE BASE 

MODEL INCLUDES MEI 2600 BILL ACCEPTOR $1,$5,$10,$20- A 100 CARD WICKET DISPENSER- REVALUE WICKET 

READER - EF MODULE {OWNER INTERFACE} – SELECTION BUTTONS – USER DISPLAY 

MODEL 1 REVALUE STATION ACCEPTS BILLS IN - DISPENSES AND REVALUES WICKETS CARD $4990.00 E 

MODEL 1A SAME AS MODEL 1 AND INCLUDES CREDIT CARD ACCEPTOR WITH RECEIPT PRINTER $6975.00 E 

MODEL 2 REVALUE STATION ACCEPTS BILLS IN - DISPENSES AND REVALUES WICKETS CARD & 1- 3.2K CHANGE HOPPER $5375.00 E 


MODEL 3 REVALUE STATION ACCEPTS BILLS IN - DISPENSES AND REVALUES WICKETS CARD & 2- 3.2K CHANGE HOPPERS $5875.00 E 


MODEL 4 REVALUE STATION IN LARGER CABINET ACCEPTS BILLS IN - DISPENSES AND REVALUES WICKETS CARD & 2- 3.2K $8585.00 E 

CHANGE / TOKEN HOPPERS AND INCLUDES A 800 BILL- SINGLE DENOMINATION DISPENSER / BILL BUSTER 


MODEL 5 REVALUE STATION CREDIT CARD ONLY DISPENSES AND REVALUES WICKETS CARD WITH RECEIPT PRINTER $5390.00 E 

WATCH FOR NEW WICKET PRODUCTS 

METERS - CREDIT CARD SYSTEMS - NON CODED TOKENS 

BY WINTER OF 2009 

Page 4

MODEL 

NUMBER 

DESCRIPTION 

WICKETS® SV & WICKET REVALUE STATION FOR CAR WASH, LAUNDRY & AMUSEMENT WICKET 

READERS & CARDS 

ALL WICKET READERS LISTED CAN BE MOUNTED INTO IDX METER BOXES FOR NO ADDITIONAL 

CHARGE 

LIST DISC. 

PRICE CODE 

WR88 STORED VALUE RFID WICKET READER WITH CABLE AND RS232 END CAN BE ATTACHED TO ANY $337.94 D 

OF THE WICKET BOXES TO INTERFACE WITH 99% OF THE TIMERS & CONTROLLERS MADE FOR 

DIFFERENT INDUSTRIES 

WK-CD MODULE INTERFACE AND POWER MODULE FOR IDX DISPLAY TIMER WITH “CARD DISPLAY protocol” $123.60 D 

WK-HV MODULE PULSE INTERFACE AND POWER MODULE HIGH VOLTAGE 95VAC TO 270VAC FOR VACUUMS ETC $123.60 D 

WK-LV MODULE PULSE INTERFACE AND POWER MODULE LOW VOLTAGE 12 VAC / VDC TO 28VAC OR 34VDC NON $123.60 D 

IDX DISPLAY TIMERS OR OTHER MFG TIMERS 

WK-MDB INTERFACE AND POWER MODULE FOR STANDARD CHANGER MAKERS, REVALUE STATION $123.60 D 

MODULE AUTO TELLER, GLASS FRONT VENDERS & OTHER EQUIPMENT 

BS WR1 WICKET BAY INSTRUCTION SIGN 8.5”x11” UV COATED PLASTIC $25.11 D 

BS WR2 WICKET METER INSTRUCTION DECAL “TAP HERE” 1.5” x 1.5” $2.58 D 

WK 88P COMPUTER INTERFACE TO PROGRAM WICKET READERS, CARDS, RE-VALUE CARDS, READ REPORT $695.00 D 

CARD & DEDUCT PREMIUM POINTS INCLUDES 5VDC POWER SUPPLY, DB9 TO SERIAL CABLE, SOFT- 

WARE, CARDS: 2- REPORT, 3- PROGRAMMING, 3- SERVICES SINGLE SITE, SINGLE INDUSTRY LICENSES 

****OPTIONAL MULTI SITE LICENSING*** 

$100.00 NET 

WS1C??????? 

U.S.WICKETS SV RFID CARD PRICING 

100 – 1,000 $1.55 EACH A 

1,100 – 5,000 $1.48 EACH A 

5,100 – 10,000 $1.40 EACH A 

10,000 + $1.33 EACH A 

STOCK CARDS ONLY SOLD IN LOTS OF 100 CARDS ONLY 

CUSTOM CARDS MINIMUM OF 2,500 SOLD IN LOTS OF 500 $1.55 EACH 

ONETIME ART-WORK CHARGE $150.00 

REPLACEMENT SERVICE CARDS 

WS1P??????? PROGRAMMING CARD 6.66 A 

WSIR??????? REPORT CARD 6.66 A 

WSIS??????? SERVICE CARD 6.66 A 

WS1F??????? FLEET CARDS –STOCK CARDS SOLD IN LOTS OF 100 2.00 A 

WICKETS REVALUE STATIONS 

by STANDARD CHANGE MAKERS 

MODELS INCLUDE MEI 2600 BILL ACCEPTOR, EF MODULE (owner interface), LIGHTED SELECTION 

BUTTONS, USER DISPLAY, WICKETS READER and WICKETS CARD DISPENSER -HOLDS 100 CARDS 

MODEL 1 BASE MODEL INCLUDES BILL ACCEPTOR FOR $1,5,10,20 DISPENSES PRE VALUED WICKETS $4990.00 E 

AND REVALUES WICKETS NO CHANGE GIVEN opening size 32”H x 18”W x 13”D 

MODEL 1A BASE MODEL 1 PLUS CREDIT CARD OPTION AND RECEIPT PRINTER $6795.00 E 

MODEL 2 BASE MODEL INCLUDES BILL ACCEPTOR FOR $1,5,10,20 DISPENSES PRE VALUED WICKETS, $5375.00 E 

REVALUE WICKETS AND ONE 3.2K COIN HOPPER FOR CHANGE OR TOKENS opening size 32”H x 18”W x 13”D 


MODEL 3 BASE MODEL 2 BUT INCLUDES TWO 3.2K COIN/TOKEN HOPPERS opening size 32”H x 18”W x 13”D $5875.00 E 


MODEL 4 LARGER CABINET WITH THE SAME FEATURES AS MODEL 3A AND INCLUDES A SINGLE NOTE $8585.00 E 

ONE DENOMINATION BILL DISPENSER HOLDS 800 BILLS opening size 36”H x 18”W x 18”D 


MODEL 5 REVALUE STATION CREDIT CARD ONLY DISPENSES AND REVALUES WICKETS CARD WITH RECEIPT $5390.00 E 

PRINTER opening size 32”H x 9”W x 13”D 

CUSTOM DECALS AVAILABLE - CONSULT IDX 

Page 5

MODEL 

NUMBER 

DESCRIPTION 

WICKET ACCESSORIES & 

OPTIONS FOR WICKETS REVALUE STATIONS 

LIST DISC. 

PRICE CODE 

RS-CASHCODE CASH CODE ST Series UP GRADE FOR CANADIAN BILLS $5,10,& 20 $363.00 E 

RS-TOKEN TOKEN OPTION UP GRADE FOR REVALUE STATION EXCEPT MODELS 1,1A & 5 $68.00 E 

RS-HISPEED1 HI-SPEED INTERNET PROCESSING UPGRADE (IPTran FOR MERCURY & STERLING) $525.00 E 

RS-HISPEED2 HI-SPEED INTERNET PROCESSING UPGRADE (IPTran FOR PAYMENTECH & GLOBAL) $945.00 E 

RS-HEATER 180-WATT STRIP HEATER WITH THERMOSTAT $135.00 E 

RS-MOUNT REAR LOAD MOUNTING BRACKET KIT FOR STANDARD CHANGE REVALUE STATIONS $49.00 E 

WICKET- WICKET JACKPOT DISPLAY IS DESIGNED TO REWARD YOUR LOCAL CUSTOMERS AS IT $1069.00 D 

JACKPOT AND MAKE IT FUN TO WASH AT YOUR CAR WASH 

WICKET- WICKET REGISTRATION CENTER IS THE FIRST SELF SERVICE INFORMATION GATHER CENTER $1069.00 D 

REGISTRATION THIS WILL GIVE THE CAR WASH OWNER A TRUE DATA BASE OF HIS CUSTOMERS 

WICKET- WICKET REDEMPTION CENTER IS WHERE YOUR WILL BE ABLE TO CONVERT IS POINTS $1069.00 D 

REDEMPTION INTO BONUS BUCKS WITH OUT THE OWNER HAVING TO BE AROUND 

WICKET- REGIS WICKET REGISTRATION/ REDEMPTION COMBO CENTER IS THE FIRST SELF SERVICE $1539.00 D 

/REDEMPTION SYSTEM TO TRULY PROMOTE THE CAR WASH AS IT GATHERS THE END USERS INFORMATION 

AND IT IS ABLE TO CONVERT THE CUSTOMERS POINTS INTO BONUS BUCKS AND GIVE THE CARD 

WICKET CARD HOLDER THEIR BIRTHDAY BUCKS WITH OUT THE OWNER HAVING TO BE AROUND 

WK-NAC12VSA- NIGHT ACCESS DOOR SYSTEM -STAND ALONE- FOR CONTROLLED ACCESS TO BUILDINGS WITH $4000.00 A 

KIT 

A CONTROLLED ACCESS WICKET CARD INCLUDES SOFTWARE, DOOR MOUNTED WICKET READER, 

12VDC POWER ADAPTOR, NIGHT ACCESS CONTROLLER, ELECTRIC STRIKE, DEADLATCH, MORTISE 

CYLINDER LOCK, EXIT PADDLE & CONNECTION CABLE. 

WK-NAC12VTA- SAME FEATURES AS STAND ALONE BUT REQUIRES A COMPUTER CONNECTION FOR EXSPANDED $4000.00 A 

KIT 

FEATURES. NOT ALL WICKET CARD HOLDERS WITH CORRECT SITE HAVE ACCESS, ONLY THOES 

WITH PERMISSION. EACH ACCESS IS TIMED & DATED FOR CONTROL , ANY CARD CAN BE BLOCKED 

OR GIVEN LIMITED ACCESS. HAS THE SAME COMPONETS AS THE STAND ALONE SYSTEM 

WK-NAC12VSA NIGHT ACCESS CONTROLLER FOR STAND ALONE SYSTEM $230.77 B 

WK-NAC12VTA NIGHT ACCESS CONTROLLER FOR COMPUTER / REGISTRATED CUSTOMERS $230.77 B 

WK-NAC ALB NIGHT ACCESS DOOR MOUNTED ALUMINUM ENCLOSURE $21.27 A 

WR USBDB9 USB-SERIAL ADAPTOR 2.5’ CORD $26.80 A 

WR USBHUB2 USB 4 PORT MIN HUB WITH A/C POWER ADAPTOR $39.97 A 

MB199-51 CONTROLL CABLE / 2TWISTED PAIRS OF SHELDED ALL COPPER CABLE sold by the foot $1.16 A 

TRA12VDC 12 VOLT DC POWER ADAPTOR FOR NIGHT ACCESS SYSTEMS $17.74 A 

BT/LTT199-1 CABLE HOOK UP BETWEEN DISPLAY AND COMPUTER RS232 TO DB9 SERIAL $20.00 A 

BILL ACCEPTORS 

BILL ACCEPTOR FOR METER BOXES 

ALL BILL ACCEPTORS LISTED CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL 

CHARGE 

BCMAG52 COIN CO MAG 52R SERIES BILL ACCEPTOR –24VAC- WILL ACCEPT U.S. BILLS $1, $5, $10, & $20 $437.81 A 

BCMEI2400 MARS 2400 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $2, & $5 $555.50 A 

BCMEI2600 MARS 2612 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $5, $10, & $20 $654.61 A 

MA70-V ISOLATED 24VAC POWER SUPPLY AND DISABLE RELAY MODULE FOR BILL ACCEPTORS WHEN TIED $33.50 C 

TO VENDOR TIMER 

CREDIT CARD ADDON SYSTEMS 

BAY CONTROLS ONLY – USES IDX DISPLAY TIMERS AS THE CARD DISPLAY 

H 100-0127 HAMILTON DAN SYSTEM METER BOX CONTROLS MB155 & MCD155 SERIES ONLY $1485.00 A 

WASH GEAR METER BOX CONTROLS MB150, MB155, MCD150, & MCD155 SERIES $2200.00 A 

WASH CARD 

C/F 

WASH VERIFY 

C/F 

G6 E-PORT USA TECHNOLOGY CARD READER AND CELLULAR TRANSMITTER PULSE INTER FACE C/F A 

Page 6

MODEL 

NUMBER 

DESCRIPTION 

ELECTRONIC COIN “XEPTORS” 

LIST DISC. 

PRICE CODE 

ELECTRONIC SINGLE COIN “XEPTORS” 

ALL IDX COIN ACCEPTORS CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGES 

MA601 

ULTIMATE GEMINI TWIN ***OBSOLETE*** REPLACED BY MA602-F or MA602-C 

MA610 

ULTIMATE GEMINI ***OBSOLETE*** 

MA602-F GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR” STAND. QUARTER ONLY W/ BENT COIN $167.23 C 

RELEASE, COIN SENSE OPTICS, 2” WIDE STAINLESS STEEL FACEPLATE AND 4 WIRE RELAY OUT PUT 

MA602-A GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR - INSERT ONLY- $151.95 C 

MA602-C GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR MOUNTED IN MA20 FACE PLATE $175.57 

MULTI COIN ELECTRONIC COIN “XEPTORS” 

MA800CR0C30F HAWK SOLID STATE MULTI-METAL / MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL $191.95 C 

FACEPLATE. THE OEM’S DREAM “XEPTOR” WITH IT’S FIELD PROGRAMMABLE, MULTI-NATIONAL COIN 

CAPABILITY AND ACCEPTS 6 DIFFERENT SIZES OF COINS OR TOKENS WITH DIFFERENT VALUES. 

IT’S EXCLUSIVE ELECTRONIC DESIGN OFFERS A BENT COIN RELEASE IN AN ELECTRONIC “XEPTOR” 

TO MAKE COIN JAMS A THING OF THE PAST. THIS “XEPTOR” OFFER A MULTI-COLOR INDICATOR LED 

FOR OPERATIONAL STATUS & FIELD DIAGNOSTICS. PATENT COVERAGE: U.S. – 5,046,841; AUS. – 

619,639; CAN. – 1,313,806; U.K. – 2,227,347; OTHERS PENDING 

MA800CR0C34F HAWK “XEPTOR” WITH COIN CREDIT OPTICS AND MA19 SNAP-IN STAINLESS STEEL FACEPLATE. $221.99 C 

MA800CR0C30A HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.888” WITHOUT FACEPLATE $176.67 C 

MA800CR0C34A HAWK “XEPTOR” WITH COIN CREDIT OPTICS AND SIZED FROM 1.130” TO 0.888” WITHOUT FACEPLATE $219.99 C 

MA800CR0C30C HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.888” WITH MA20 “OLD STYLE” 2” $200.29 C 

WIDE FACEPLATE 

MA800CH0C30A HAWK “XEPTOR” SET UP FOR HAMILTON ACW4 WIRING HARNESS $189.95 C 

MA800CL0030A HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.952” WIRED FOR LAUREL $269.00 C 

ELECTRONIC VENDORS 

MA800CR0D70F HAWK “XEPTOR” SET UP FOR EURO COINS $2, $1, $0.50 & $0.20 AND MA19 SNAP-IN STAINLESS $191.95 C 

STEEL FACEPLATE 

MA800CR0H70F HAWK “XEPTOR” SET UP TO ACCEPT AUSTRALIA’S AND NEW ZEALAND’S $1 AND $2 COINS $191.95 C 

MA800CR0H30F HAWK “XEPTOR” SET UP TO ACCEPT BRITISH 1POUND AND 50 PENCE COINS $191.95 C 

MA803CM0??0A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH 3 SEPARATE COIN SIGNALS AND ACCEPTS 6 $259.95 C 

DIFFERENT COINS. CAN PRE-SORT COINS IF OPTIONAL #DD-1050 DIVERTER DRIVER AND OPTIONAL 

#MA19-D SNAP-IN FACE PLATE IS ADDED. THE HAWK “XEPTOR” IS IDEAL TO FOR MIXING MULTI- 

COINS AND/OR TOKENS INCREASE PROFITS. THE OEM’S DREAM “XEPTOR” WITH IT’S FIELD 

PROGRAMMABLE, MULTI-NATIONAL COIN CAPABILITY. IT’S EXCLUSIVE ELECTRONIC DESIGN 

OFFERS A BENT COIN RELEASE IN AN ELECTRONIC “XEPTOR” TO MAKE COIN JAMS A THING OF THE 

PAST. THIS “XEPTOR” OFFER A MULTI-COLOR INDICATOR LED FOR OPERATIONAL STATUS & FIELD 

DIAGNOSTICS. PATENT COVERAGE: U.S. – 5,046,841; AUS. – 619,639; 

U.K. – 2,227,347; OTHERS PENDING 

MA803DM0??0F HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH DIVERTER, 3 SEPARATE COIN SIGNALS AND $398.38 C 

ACCEPTS UP TO 6 DIFFERENT COINS. ALSO INCLUDES THE SAME FEATURES AS OTHER MA800’S 

MA803SG0??0A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” SET UP FOR HAMILTON GOLD LINE WIRING HARNESS $259.95 C 

MA803SG0??4A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH COIN CREDIT OPTICS SET UP FOR HAMILTON $293.29 C 

GOLD LINE WIRING HARNESS 

MA803CZ0??0A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” SET UP FOR HAMILTON ACW4 WIRING HARNESS $259.95 C 

MA803CZ0??4A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH COIN CREDIT OPTICS SET UP FOR HAMILTON $315.95 C 

ACW4 WIRING HARNESS 

MA812CR0??0F HAWK 12 COIN MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL FACEPLATE. SAME $239.44 C 

FEATURES AS THE MA800 BUT WILL ACCEPT UP TO 12 DIFFERENT COIN TYPES OF DIFFERENT 

SIZES AND DENOMINATIONS 

Page 7

MODEL 

NUMBER 

DESCRIPTION 

MULTI-NATIONAL COIN AND TOKEN ELECTRONIC “XEPTORS®” 

ALL ACCEPTORS LISTED CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGE 

**MA820 VERSION WITH ANTI-STRING OPTICS** 

LIST DISC. 

PRICE CODE 

MA820CR0C34F HAWK PLUS SOLID STATE MULTI-METAL / MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS $258.62 C 

STEEL FACEPLATE. THE ONLY COIN / TOKEN “XEPTOR” THAT CAN DISTINGUISH BETWEEN THE 

CENTER METAL OF U.S. AND WORLD COINS AND THEIR CLAD EXTERIOR. THIS PATENTED FEATURE 

MAKES THE MA820 SERIES OF “XEPTORS” PERFECT FOR THE OEM. OFFERS VERSATILITY BEYOND 

THE REST. THIS “XEPTOR” OFFERS A MULTI-COLOR INDICATOR LED FOR OPERATIONAL STATUS & 

FIELD DIAGNOSTICS. THE CLAM SHELL DESIGN MAKES DIGGING OUT JAMS A THING OF THE PAST. 

MANUAL IN-FIELD COIN PROGRAMMING OR OPTIONAL CS820 COIN SELECTOR MAY BE USED. THE 

COIN PULSE IS GENERATED AFTER THE COIN PASSES THROUGH THE COIN CREDIT OPTICS. IF 

SOMEONE TRIES TO STRING THE MA820, THE COIN CREDIT OPTICS WILL TURN OFF THE “XEPTOR” 

UNTIL THE COIN HAS BEEN REMOVED. THIS MODEL COMES WITH A SPECIAL 2-YEAR OEM 

WARRANTY. PATENT COVERAGE: U.S. – 6,112,876; OTHERS PENDING 

X10 SERIES “XEPTORS®” 

FOR SITE SPECIFIC CODED X-MARK® TOKEN 

ALL ACCEPTORS LISTED CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGE 

X10CR??030F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL FACEPLATE $228.58 C 

SOARS HIGH ABOVE THE REST WITH ITS MULTI COIN / TOKEN CAPABILITY. IDEAL FOR MIXING 

PROMOTIONAL TOKENS WITH STANDARD ONES & THE CONVENIENCE OF MIXING OLD TOKENS WITH 

NEW ONES DURING CHANGEOVER PERIOD. ITS EXCLUSIVE ELECTRONIC DESIGN OFFERS A COIN 

RELEASE LEVER IN AN ELECTRONIC CODED “XEPTOR” TO MAKE JAMS A THING OF THE PAST. THIS 

“XEPTOR” OFFERS X-MARK® OPTICALLY ENCODED TOKENS AND A MULTI-COLOR INDICATOR LED 

FOR OPERATIONAL STATUS & FIELD DIAGNOSTICS 

PATENT U.S. 5,046,841; AUS. 619,639; CAN. 1,313,806; U.K. 2,227,347 

X10CR??030C EAGLE OPTICALLY ENCODED TOKEN “XEPTOR”. WITH OLD STYLE 2” FACE PLATE $236.92 C 

X10CH??030A EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” FOR HAMILTON ACW4 WITH RETROFIT WIRING $226.58 C 

HARNESS & PLUG 

X10CR????4F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH COIN CREDIT OPTICS AND SNAP-IN MA19 $258.62 C 

STAINLESS FACE PLATE 

X10CM????0A EAGLE OPTICAL ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH 3 SEPARATE COIN SIGNALS, 6 $286.58 C 

DIFFERENT COINS. IDEAL FOR AUTO CASHIERS OR ADD DIVERTER OUTPUT #DD-1050 & OPTIONAL 

MA19-D SNAP-IN FACEPLATE TO PRESORT COINS. IDEAL FOR MIXING MULTI-COINS AND / OR 

TOKENS TO INCREASE PROFITS. THE OEM’S DREAM “XEPTOR” WITH IT’S FIELD PROGRAMMABLE, 

MULTI-NATIONAL COIN CAPABILITY. IT’S EXCLUSIVE ELECTRONIC DESIGN OFFERS A BENT COIN 

RELEASE IN AN ELECTRONIC “XEPTOR”® TO MAKE COIN JAMS A THING OF THE PAST. THIS 

“XEPTOR” OFFERS A MULTI-COLOR INDICATOR LED FOR OPERATIONAL STATUS & FIELD 

DIAGNOSTICS. PATENT U.S. 5,046,841; Aus. 619,639; Can. 1,313,806; U.K. 2,227,347; OTHERS PENDING 

Page 8

MODEL 

NUMBER 

DESCRIPTION 

X10 SERIES “XEPTORS®” 

FOR SITE SPECIFIC CODED X-MARK® TOKEN 

LIST DISC. 

PRICE CODE 

X10DM????0R EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH DIVERT OR, 3 SEPARATE COIN $435.01 C 

SIGNALS, ACCEPTS UP TO 6 DIFFERENT COINS, AND THE SAME FEATURES AS ALL IDX “XEPTORS”. 

X10DM????4R EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH DIVERT OR, 3 SEPARATE COIN $465.03 C 

SIGNALS, ACCEPTS UP TO 6 DIFFERENT COINS, AND WITH COIN CREDIT OPTICS 

X10SG????0A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SET UP FOR HAMILTON GOLD LINE $286.58 C 

ACW WITH PLUG 

X10SG????4A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SET UP FOR $328.25 C 

HAMILTON GOLD LINE ACW W/ PLUG 

X10CZ????0A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SET UP FOR HAMILTON ACW4 WITH $286.58 C 

PLUG 

X10CZ????4A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SET UP FOR $328.58 C 

HAMILTON ACW4 WITH PLUG 

X10CB???30A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SET UP FOR AMERICAN PAY $286.58 C 

STATION 

X10CB???34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH COIN CREDIT OPTICS SET UP $328.25 C 

FOR AMERICAN PAY STATION 

X10N3??C70F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH 3 SEPARATE OUTPUT WIRES, EACH W/ ONLY 1 $477.62 C 

PULSE PER OUTPUT. 

X10N6??C70F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH 6 SEPARATE OUTPUT WIRES, EACH W/ ONLY 1 $477.62 C 

PULSE PER OUTPUT. 

ACCESSORIES FOR ALL IDX MULT-COIN “XEPTORS” 

PP-CWHR PERSONALITY PLUG FOR HAMILTON ACW WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” $13.25 C 

PP-CWR PERSONALITY PLUG WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” $9.93 C 

PP-CWR3 PERSONALITY PLUG DESIGNED Fragramatics FOR IDX MA800 & X10 “XEPTORS” WITH 3 WIRES $9.93 C 

PP-CWRL PERSONALITY PLUG WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” IN LAUREL VENDORS $13.25 C 

PP-CWRNRI3 PERSONALITY PLUG WITH 3 RELAY MODULE OUTPUT FOR IDX X10NR “XEPTORS” $210.00 C 

PP-CWRNRI6 PERSONALITY PLUG WITH 6 RELAY MODULE OUTPUT FOR IDX X10NR “XEPTORS” $210.00 C 

PP-MO PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” $13.25 C 

PP-MOB PERSONALITY PLUG TO BE USED IN AMERICAN “PAY STATION” WITH MA800 & X10 “XEPTORS” $13.25 C 

PP-MOSG PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” IN HAMILTON’S “GOLD LINE” $13.25 C 

ACW 

PP-MOZ PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” IN HAMILTON’S STANDARD $13.25 C 

ACW 4 

MA19 SNAPPY 2” SNAP-IN FACEPLATE FITS STANDARD 2” WIDE FOOTPRINT. REDUCES COIN JAMS FROM $41.85 B 

MISALIGNED METER BOX DOORS AND ACCEPTOR. ALLOWS THE OPERATOR TO REMOVE THE 

ACCEPTOR WITHOUT UNSCREWING THE XEPTOR” FROM THE METER DOOR. INTERCHANGES WITH 

MOST OTHER “MANUFACTURER’S ELECTRONIC ACCEPTORS. 

MA19-D SNAPPY 2” SNAP-IN FACEPLATE WITH COIN DIVERTER INSTALLED DIVERTS $71.85 B 

MA19-DR SNAPPY 2” SNAP-IN FACEPLATE WITH COIN DIVERTER INSTALLED ON UNITEC X10DM SERIES $71.85 B 

MA19-DIVITRFP DIVERTER PLATE FOR MA19-D & MA19-DR $5.82 B 

MA19-EXITCHUTE SNAP IN EXIT CHUTE FOR MA19, MA19-D, & MA19-DR $1.94 B 

MA19-INLETCHUT INLET CHUTE FOR MA19, MA19-D, & MA19-DR $3.64 B 

MA20 2” WIDE “OLD STYLE” FACEPLATE FOR X10, & MA800 “XEPTORS” $27.85 B 

MA20-C COIN CHUTE FOR MA20 OR MA19 FACEPLATE FOR METERS MB150 & MCD150 $6.08 B 

MA21 2” WIDE STAINLESS STEEL FACEPLATE FOR MA601 “XEPTORS” $36.12 C 

MB199-22 PLASTIC COIN CATCHER FOR MA19, MA20, & MA21 2” WIDE FACEPLATES $2.50 D 

Page 9

MODEL 

NUMBER 

DESCRIPTION 

METER BOXES FOR VAULTS / SAFES 

PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824 

LIST DISC. 

PRICE CODE 

MB100 COIN METER FOR SAFE- SIZE 8”W x 11”H x 5.75”D - FULLY WIRED, INDICATOR LIGHT, W ITH 8 $309.91 B 

POSITION SELECTOR SWITCH, CAM LOCKS WITH 1 KEY, BACK PANEL DRILLED AND TAPPED FOR 

TIMER, COUNTER, HEATER OR LAST COIN ALERT. 

MBP100 COIN METER FOR SAFE- SIZE 8”W x 11”H x 5.75”D - TO BE USED WITH PIN LOCK FULLY WIRED, $356.66 B 

INDICATOR LIGHT, W/ 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED & TAPPED FOR TIMER, 

COUNTER, HEATER OR LAST COIN ALERT. 

MB150 BIG BOX COIN METER FOR SAFE – SIZE 9.5”W x 14H x 8”D – ERGONOMICALLY LAID OUT, FULLY $490.53 B 

WIRED, 8 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL 

DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. 

MB155 BIG BOX COIN METER SAFE STYLE – SIZE 11.25”W x 15.5”H x 8”D – ERGONOMICALLY LAID OUT, $595.00 B 

FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK 

PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. HINGED LIFT OUT DOOR 

WITH SHROUD OVER BILL ACCEPTOR. 

MB155V BIG BOX COIN METER FOR BILL ACCEPTOR SET UP FOR SAFE – SIZE 11.25”W x 15.5”H x 8” D– $671.78 B 

ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 

2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN 

ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL ACCEPTOR. 

VAULT / SAFE READY BIG BOX METER BOXES WITH HIGH SECURITY WRAP 

MB155W BIG BOX COIN METER SAFE STYLE – SIZE 11.25”W x 15.5H” x 8”D WITH 3/8” STAINLESS STEEL WRAP, $706.11 B 


2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST 

COIN ALERT. HINGED LIFT OUT DOOR WITH MOUNTING HOLES FOR PS200 

MB155WV BIG BOX COIN METER FOR BILL ACCEPTOR SET UP FOR SAFE – SIZE 11.25”W x 15.5”H x 8”D – WITH $776.97 B 

3/8” STAINLESS STEEL WRAP, ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR 

SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR 

COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL 

ACCEPTOR AND MOUNTING HOLES FOR PS200. 

CASH DRAWER METER BOXES 

PATENTED HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824 

MCD100 COIN METER WITH CASH DRAWER (HOLDS 700 COINS) – SIZE 8”W x 15.5”H x 5.75”D – FULLY WIRED, $537.25 B 

INDICATOR LIGHT, WITH 8 POSITION SELECTOR SWITCH, CAM LOCK AND KEY, BACK PANEL 

DRILLED & TAPPED FOR TIMER, COUNTER, HEATER, OR LAST COIN ALERT. ALSO INCLUDES 

SCREW LOCK FOR CASH DRAWER AND KEY. 

MCDP100 COIN METER WITH CASH DOOR (HOLDS C0INS) TO BE USED WITH PIN LOCKS – SIZE 8” x 15.5” x 5.75” $522.20 B 

FULLY WIRED, INDICATOR LIGHT 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED & TAPPED 

FOR TIMER, COUNTER, HEATER, OR LAST COIN ALERT. PIN LOCKS (#MB199-7) NOT INCLUDED. 

MCD150 BIG BOX COIN METER WITH CASH DRAWER (HOLDS 2800 COINS)– SIZE 9.5”W x 20”H x 8D” – $713.61 B 

INCLUDES SECURITY BAR ACROSS OVER SERVICE DOOR, CASH DRAWER SCREW LOCK WITH 1 

KEY, SECURITY BAR ACROSS CASH DRAWER & HIGH SECURITY PUCK LOCK W/KEYS, 2 CAM 

LOCKS WITH KEYS ON SERVICE DOOR, ERGONOMICALLY LAID OUT, FULLY WIRED, 8 POSITION 

SELECTOR SWITCH, BACK PANEL DRILLED AND TAPPED FOR COUNTER, HEATER, OR LAST COIN 

ALERT. HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR PS200 

Page 10

MODEL 

NUMBER 

DESCRIPTION 

CASH DRAWER BIG BOX METER BOXES 


LIST DISC. 

PRICE CODE 

MCD155 BIG BOX COIN METER WITH CASH DRAWER (HOLDS 4,000 COINS) – SIZE 11.25”W x 21.5”H x 8”D $946.75 B 


2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON CASH DRAWER, BACK 

PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT 

SERVICE DOOR WITH MOUNTING HOLES FOR PS200 

MCD155V BIG BOX COIN METER FOR BILL ACCEPTORS W/CASH DRAWER (HOLDS 4,000 COINS) $999.00 B 

– SIZE 11.25”W x 21.5”H x 8”D – SERVICE DOOR WITH SHROUD TO PROTECT BILL ACCEPTOR. 


2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON CASH DRAWER, BACK PANEL 

DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT SERVICE 

DOOR WITH MOUNTING HOLES FOR PS200 

CASH DRAWER METER BOXES WITH EXTRA SECURITY WRAP 


MCD155W BIG BOX COIN METER W/CASH DRAWER (HOLDS 4,000 COINS) –WITH 3/8” STAINLESS STEEL WRAP $C/F B 

SIZE 11.25”W x 21.5”H x 8”D -ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR 

SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON 

CASH DRAWER, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. 

HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR PS200 

MCD155WV BIG BOX COIN METER FOR BILL ACCEPTORS W/CASH DRAWER (HOLDS 4,000 COINS) $C/F B 

WITH 3/8” STAINLESS STEEL WRAP – SIZE 11.25W” x 21.5”H x 8”D – SERVICE DOOR WITH SHROUD TO 

PROTECT BILL ACCEPTOR. ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR 

SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON 

CASH DRAWER, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. 

HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR PS200 

OPTIONAL MODIFICATION FOR METER BOXES 

(TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER) 

-3 REPLACE 2 STACK 8 POSITION ROTARY (MB199-2M) WITH 3 STACK 8 POSITION ROTARY SWITCH $56.92 B 

(MB199-3M) 

-10 REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 2 STACK ROTARY & $75.58 B 

16 LUG TERMINAL 

-10F REPLACE 8 POS. 2 STACK SWITCH & 12 LUG TERMINAL W/ 10 POS. STACK SWITCH, METAL FANNING $99.04 B 

STRIP & 16 LUG TERMINAL 

-13 REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 3 STACK SWITCH & $121.53 B 

16 LUG TERMINAL 

-13F REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 3 STACK SWITCH, $146.53 B 

METAL FANNING STRIP & 16 LUG TERMINAL 

THE ABOVE OPTIONS AVAILABLE ON MBWH WIRING HARNESS ONLY 

-C STAINLESS STEEL WELDED COLLAR FOR METER BOXES $46.15 B 

-D DIXMOR TIMER HOLE IN SERVICE DOOR $24.43 B 

-F FANNING STRIP FOR QUICK DISCONNECT ON WIRING HARNESS $18.95 B 

-G GIGA TIME HOLE IN SERVICE DOOR ON MB155, MBW155, MCD155, MCD155W ONLY $18.46 B 

-L LITTLE TWO TIMER HOLE IN SERVICE DOOR $18.46 B 

-O ABOVE 100 & 150 METER BOXES WITHOUT WIRING OR 8 POSITION ROTARY SWITCH B 

-O ABOVE 155 SERIES OF METER BOXES WITHOUT WIRING OR 10 POSITION ROTARY SWITCH B 

-T TIME MASTER HOLE IN SERVICE DOOR WITH STAINLESS STEEL BRACKET $24.43 B 

Page 11

MODEL 

NUMBER 

DESCRIPTION 

(TO SPECIFY AN ACCESSORY, ADD APPROPRIATE MODEL NUMBER AS A SEPARATE LINE ITEM) 

LIST DISC. 

PRICE CODE 

MBLTT LITTLE TWO TIMER HOLE IN SERVICE DOOR (SPECIALS) $18.46 B 

MBTM5W SMALL TIME MASTER WINDOW $7.53 B 

MBTM5LW LARGE TIME MASTER WINDOW $7.53 B 

MBTM5B BRACKET USED FOR MOUNTING TIME MASTER ON SERVICE DOOR $12.61 B 

MBTM5H HORN FOR TIME MASTER $23.00 B 

MBQ1 QUICK DISCONNECT ON WIRING TO REMOVE SERVICE DOOR $23.07 B 

MBXH LIGHT AND HOLE FOR X-TRA TIME $10.00 B 

PS200 PermaSwitch PS200 10 POSITION ELECTRONIC SWITCH INTERCHANGEABLE WITH MOST 8 & 10 $375.00 B 

POSITION ROTARY SWITCHES W/ MINIMUM MECHANICAL MODIFICATIONS, 10 BRIGHT LED’S, PUSH 

BUTTON SELECTION. USA PATENT #5,371,681. 

MA72-P RELAY OUTPUT MODULE FOR PS200 $33.50 C 

METER BOX ACCESSORIES 

MSD100 REPLACEABLE SERVICE DOOR FOR MB & MCD METER BOXES WITH 1 CAM LOCK $98.58 B 

MSDP100 REPLACEABLE SERVICE DOOR FOR MBP, MCDP, OR MCDA METER BOXES. LOCK NOT INCLUDED. $96.44 B 

MSD150 REPLACEABLE SERVICE DOOR FOR MB150 METER BOX. INCLUDES 2 CAM LOCKS. $143.65 B 

MSD150-CC REPLACEABLE SERVICE DOOR FOR MB150 METER BOX TO USE WITH “E-WASH” CARD READER. $198.19 B 

INCLUDES 2 CAM LOCKS. 

MSD155 REPLACEABLE SERVICE DOOR FOR MB155 METER BOX. INCLUDES 2 CAM LOCKS. $165.05 B 

MSD155V REPLACEABLE SERVICE DOOR FOR MB155 BILL ACCEPTOR METER BOX. INCLUDES 2 CAM LOCKS. $241.83 B 

MBS SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB100 METER BOX – SIZE 8” x 11” x 5.75” $207.86 B 

MBPS SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MBP100 METER BOX FOR PIN LOCK $229.30 B 

SIZE 8” x 11” x 5.75” 

MBS150 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB150 METER BOX – SIZE 9.5” x 14” x 8” $315.00 B 

MBS155 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB155 & MB155V METER BOXES $413.04 B 

SIZE 11.25” x 15.5x 8” 

MBS155W SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB155 & MB155V METER BOXES $483.43 B 

SIZE 11.25” x 15.5” x 8” WITH 3/8” SECURITY WRAP 

MCDS SHELL WITH CD (CASH DRAWER) & CAM LOCK ONLY, LESS SERVICE DOOR & WIRING HARNESS $414.50 B 

FOR MCD METER BOX. SIZE 8” x 15.5” x 5.75” 

MCDPS SHELL WITH VDP (VAULT DOOR) ONLY- LESS PIN LOCKS, LESS SERVICE DOOR & WIRING HARNESS $410.89 B 

FOR MCDP METER BOX SIZE 8” x 15.5” x 5.75” 

MCDS150 SHELL & CASH DRAWER (CD150) LESS PUCK LOCK, SECURITY BAR, SERVICE DOOR & WIRING $570.83 B 

HARNESS FOR MCD150 METER BOX SIZE 9.5” x 20” x 8” 

MCDS155 SHELL W/ CASH DRAWER & PUCK LOCK, LESS SERVICE DOOR & WIRING HARNESS FOR MCD155 OR $630.00 B 

MCD155V METER BOX. SIZE 11.25” x 21.5” x 8” 

MBWH WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 2 STACK ROTARY SWITCH $53.42 B 

MBWH-10 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH $91.27 B 

MBWH-10F WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH $112.31 B 

WIRED TO FANNING STRIP 

MBWH-10/3 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 3 STACK ROTARY SWITCH $152.89 B 


MBWH-150/10 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 2 STACK ROTARY SWITCH $96.55 B 

MBWH-150/10/3 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 3 STACK ROTARY SWITCH $152.89 B 

MBWH-150/10F WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/ 10 POS. 2 STACK ROTARY SWITCH $117.92 B 

WIRED TO FANNING STRIP 

MBWH-150/3 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 3 STACK ROTARY SWITCH $83.69 B 

MBWH-150/3F WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W10 POSITION 3 STACK ROTARY SWITCH & $101.64 B 

METAL FANNING STRIP 

MBWH-150/F WIRING HARNESS FOR 150 SERIES METER BOXES WITH 8 POSITION 2 STACK ROTARY SWITCH & $74.92 B 


MBWH-2F WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 3 STACK ROTARY SWITCH & $74.16 B 


Page 12

MODEL 

NUMBER 

DESCRIPTION 

METER BOX ACCESSORIES 

LIST DISC. 

PRICE CODE 


MBWH-3F WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 3 STACK ROTARY SWITCH $101.94 B 

FANNING STRIP 

MBWH-PS WIRING HARNESS FOR 100 SERIES METER BOXES WITH PS200 ELECTRONIC SWITCH $59.04 B 

MBWH-PSF WIRING HARNESS FOR 100 SERIES METER BOXES WITH PS200 ELECTRONIC SWITCH & METAL $85.09 B 

FANNING STRIP 

MBWH-PSF/150 WIRING HARNESS FOR 150 & 155 METER BOXES WITH PS200 ELECTRONIC SWITCH & METAL $85.09 B 

FANNING STRIP 

MCB METAL CASH BOX FOR MCDP & MCDA METER BOXES $14.20 B 

CD SCREW LOCK CASH DRAWER FOR MCD100 METER BOX WITH SCREW LOCK $81.14 B 

VDP VAULT DOOR FOR MCDP100 PIN LOCK METER BOX $73.60 B 

VAL PUCK LOCK VAULT DOOR FOR MCDA100 METER BOXES ROUND COVER $81.14 B 

CD150 SCREW LOCK CASH DRAWER WITH LOCK FOR MCD150 METER BOX $122.18 B 

CD155 PUCK LOCK CASH DRAWER WITH PUCK LOCK FOR MCD155 AND MCD155V METER BOX $274.15 B 

SAFES 

KEYLESS SAFES 

WS1 ELECTRONIC STAINLESS STEEL SAFE. DOOR HAS NO LOCKS TO OIL, OR KEYS TO LOSE. $581.48 A 

BREAKAWAY HANDLE. 3/8” THICK STAINLESS STEEL DOOR ATTACHED TO REMOVABLE CASH 

DRAWER (HOLDS 5000+ COINS - $1,250.00). SIZE 8” x 8” x 12” WITH 8” x 12” PLATE 

WS1-DRAWER STAINLESS STEEL SAFE DRAWER FOR WS1 $312.50 A 

WS1-SHELL STAINLESS STEEL SHELL WITH ELECTRONICS FOR WS1 SAFE $333.34 A 

WS1-SOLENOID 24VAC SOLENOID FOR WS1 SAFE $22.24 A 

MB199-23 ELECTRONIC KEY SWITCH LOCK – N/O CONTACTS- WITH 2 KEYS $44.15 A 

KEY & COMBINATION SAFES 

CSC3 8 ¾” x 9” TUBE SAFE WITH STAINLESS STEEL HEAD & MEDICO LOCK $365.72 A 

CSC-CD DIAL FOR COMBINATION LOCK SAFE HEAD ??? A 

CSCN INSTALL 1 ¼” COLLAR IN ABOVE SAFES $38.50 A 

DS1 SQUARE STAINLESS STEEL SAFE WITH REMOVABLE CASH DRAWER DESIGNED FOR MEDICO PLUG $583.11 A 

LOCK INSERT & REMOVE DOOR WITH ALLEN WRENCH. CASH DRAWER HOLDS 4500+ QUARTERS 

($1,125.00) – SIZE 8” x 8” x 12” W/ 9” x 12” PLATE 

**MEDICO LOCK AND ALLEN WRENCH NOT INCLUDED** 

DS1-DRAWER STAINLESS STEEL SAFE DRAWER FOR DS1 LESS LOCK $287.00 A 

DS1-SHELL STAINLESS STEEL SHELL ONLY FOR DS1 SAFE $296.33 A 

MB199-17 MEDICO LOCK WITH 1 KEY FOR DS1 SAFE $42.44 A 

SS84315 “T” HANDLE 3/8” HEX KEY ALLEN WRENCH FOR DS1 SAFE $25.64 C 

MODEL #WS1 

MODEL #DS1 

Page 13

MODEL 

NUMBER 

DESCRIPTION 

DIGITAL CLOCK TIMERS FOR METER BOXES 

“CARD DISPLAY protocol” STANDARD 

LIST DISC. 

PRICE CODE 

LTT802-??? LITTLE TWO TIMER DIGITAL CLOCK FOR MOUNTING DIRECTLY ON THE DOOR OF METER BOXES. $416.67 C 

INCLUDES PROGRAMMABLE BONUS TIME (TIME PER COIN & COINS TO BEGIN BONUS TIME); 

X-TRA TIME; REMOTE JACK FOR RC800; CHANGEABLE 72 CHARACTER INTRO MESSAGE & 36 

CHARACTER EXIT MESSAGE; AND CONTROL INPUT LINE TO SWITCH FROM TIMER A OR TIMER B 

(EXP: SET DIFFERENT START + CYCLE TIME FOR DAYLIGHT & DARK; AND, SET DIFFERENT TIME 

PER COIN FOR TIRE CLEANER THAN RINSE). SIZE 3.35”W x 3.80”H x 3.15”D (U.S. PATENT #5,371,681) 

**NEW** DIGITAL **VENDOR TIMER** FOR METER BOXES 

LTT802-V THE FIRST DIGITAL DISPLAY TIMER DESIGNED TO CONTROL UP TO 7 DIFFERENT ELECTRONIC $595.24 C 

VENDOR SHELVES. DESIGNED TO BE MOUNTED IN THE STANDARD 2”W x 3”H HOLE PATTERN 

METER BOX. COIN BEEPER OUTPUT IS INCLUDED. IF PRODUCT IS EMPTY, COIN XEPTOR IS 

DISABLED & SCROLLS “’PRODUCT NAME’ IS EMPTY MAKE A DIFFERENT SELECTION”. SCROLLS 

PRICING & PRODUCT NAME (PROGRAMMABLE- 30 DIFFERENT CHARACTERS FOR EACH PRODUCT, 

HIGH OUTPUT LED’S, & MORE. SIZE 3.35”W x 3.80”H x 3.15”D (U.S. PATENT #5,371,681) 

MA-VEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDOR, 1 $58.00 C 

PER SHELF REQUIRED 

MA-VEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDOR, 1 $58.00 C 

PER SHELF REQUIRED 

**SPECIAL** DIGITAL CLOCK TIMERS FOR METER BOXES 

LTT802-LUCKY LITTLE TWO TIMER WITH PATENT PENDING LUCKY TIME PROGRAM. GIVES THE OPERATOR A WAY $533.49 C 

TO INCREASE REVENUE BY OFFERING HIS CUSTOMERS A CHANGE TO RECEIVE ADDITIONAL WASH 

TIME EVER TIME THEY WASH. OTHER STANDARD FEATURES HIGH OUTPUT LEDS, LAST COIN ALERT 

& COIN IN BEEP OUTPUT, TWO TIME SELECT, SHORT CIRCUIT PROTECTION, INDUSTRY STANDARD 

CARD DISPLAY protocol, STANDARD 2”W x 3”H HOLE PATTERN U.S. PATENT #5,371,681 

LCT802 LITTLE TWO TIMER DIGITAL CLOCK FOR USE WITH CREDIT CARD OR DEBIT CARD SYSTEMS $466.83 C 

THAT DO NOT CONFORM TO INDUSTRY STANDARD “CARD DISPLAY protocol”. ALL OTHER 

FEATURES, OPTIONS AND SPEC’S THE SAME AS LTT802 -- U.S. PATENT #5,371,681 

LTT807 LITTLE SEVEN TIMER DESIGNED TO CONTROL UP TO 7 DIFFERENT TIMES. IDEAL FOR COMBO VAC, $595.24 C 

PET WASHES OR BAYS THAT NEED MULTIPLE SERVICES AT DIFFERENT TIME. DESIGNED TO BE 

MOUNTED IN THE, COIN BEEPER OUTPUT AND HIGH OUT PUT 

LED’S ARE INCLUDED. SIZE 3.35”W x 3.80”H x 3.15”D (U.S. PATENT #5,371,681) 

LTT802-FRAGRA REPLACEMENT LITTLE TWO TIMER FOR FRAGRAMATIC & OLDER IVS COMBO VAC $633.99 C 

DOES NOT INCLUDE STAINLESS STEEL BRACKET 

LTT802RYKO REPLACEMENT LTT802 FOR SPECIAL RYKO MFG SIZE 3.35”W x 3.80”H x 3.15”D (U.S. PTN. #5,371,681) $516.83 C 

LDD910 LITTLE TWO TIMER DESIGNED TO CONTROL A DRYER FEATURES- DISABLE COIN XEPTOR, $533.66 C 

COIN IN BEEP, LAST ALERT OUTPUT, HIGH OUTPUT LEDS, RESET CIRCUIT, INTERRUPT 

MESSAGES AS THE TIMER COUNTS DOWN, TWO TIME TIMER OUTPUT, X-TRA TIME 

FEATURE. SIZE 3.35”W x 3.80”H x 3.15”D (U.S. PATENT #5,371,681) 

LST802 SPECIAL LITTLE TWO TIMER FOR THOSE JOBS THAT NEED A LITTLE SOMETHING MORE. CALL $416.67 C 

FACTORY FOR LEAD-TIME (EXP: PROGRAM LTT802 CURRENCY TO READ FRENCH OR KOREAN 

LANGUAGE). ADDITIONAL ENGINEERING CHARGES MAY APPLY. U.S. PATENT #5,371,681 

LTT802 

Page 14

MODEL 

NUMBER 

DESCRIPTION 

OPTIONS FOR MODEL LTT800 & LTT802 

THESE OPTIONS ARE FACTORY INSTALLED AND CANNOT BE FIELD INSTALLED. 


LIST DISC. 

PRICE CODE 

-B BURGLAR ALARM HAS VISUAL ALERT, MUST HAVE –H OPTION FOR AUDIBLE ALERT. INCLUDES $33.50 C 

IMPACT SERVICE DOOR SWITCH 

-D DISABLE COIN “XEPTOR®” OPTION. READS VISUALLY “OUT OF SERVICE” PLUS TURNS OFF COIN $33.50 C 

“XEPTOR”. 

-F HIGH OUTPUT LED FOR LTT800 & LTT802. DISPLAY CAN BE READ IN DIRECT SUNLIGHT IF PLACED IN $66.66 C 

A VACUUM. 

-H AUXILIARY OUTPUT FOR COIN BEEPER, LAST MINUTE ALERT, X-TRA TIME ALERT, & BURGLAR $33.50 C 

ALARM (-B OPTION) 

-P SHORT CIRCUIT PROOF OPTION TO PROTECT OUTPUT ON LTT802. $16.66 C 

-T LATCH TIME OPTION. WASH AS LONG AS YOU WANT TIME. INCLUDES –D, –H, -F, -P OPTIONS. $178.57 C 

ACCESSORY MODULES FOR LTT800 & LTT802 

LC521-AC LAST MINUTE ALERT PLUG-IN TYPE, USES DS508 SOCKET (A/C TYPE FOR 24VAC ONLY) $80.00 C 

DS508 PLUG IN BASE FOR LC521-AC HORN $5.83 C 

LC525-AC SAME AS LC521-AC W/ NO PLUG-IN HOUSING. INCLUDES “L” BRACKET FOR MOUNTING. $41.67 C 

ACCESSORY PARTS FOR LTT800 & LTT802 

IRM800 INFRARED RECEIVER FOR IR800 TO CONVERT IDX DISPLAYS / DISPLAY TIMERS FOR USE WITH $53.82 B 

INFRARED REMOTE CONTROL. 

LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR & CAM LOCK $100.00 B 

SIZE – 6” H x 5 9/16” W x 5” D 

BT/LTT- 

CDPROGRAM 

UPGRADE CHIP AND EEPROM TO INDUSTRY STAND CREDIT “CARD-DISPLAY protocol” $88.30 C 

BT/LTT-LUCKY UPGRADE IDX TIMER TO LUCKY TIME PROGRAM INCLUDES “CARD-DISPLAY protocol” $88.30 C 

LTT10 RED ACRYLIC LENS FOR FACE OF THE LTT800 & LTT802 $4.95 C 

LTT11 LTT HOUSING – COMPLETE (RED LEXAN®) $10.00 C 

LTT11-FC LTT HOUSING FRONT COVER WITH 4 POSTS (RED LEXAN) $6.66 C 

LTT11-H LTT HOUSING LESS FRONT COVER (RED LEXAN) $8.33 C 

LTT20 EEPROM WITH MESSAGE PLUG-IN $20.00 C 

LTT30 MICROPROCESSOR CHIP FOR LTT800 & LTT802 $68.33 C 

LTT41-P1 WIRING HARNESS FOR P-1 HOOK-UP ON LTT SERIES $15.31 B 

LTT41-P3 WIRING HARNESS FOR P-3 HOOK-UP ON LTT SERIES WITH DISABLE (-D) OPTION $15.31 B 

LTT41-P3S WIRING HARNESS FOR P-3 HOOK-UP ON LTT SERIES WITH ALL OPTIONS $16.85 B 

LTT51 HIGH OUTPUT LED SEGMENT FOR LTT800 & LTT802 $21.67 C 

Page 15

MODEL 

NUMBER 

DESCRIPTION 

Giga Time 

ULTIMATE IN MULTI TIME DISPLAY TIMERS FOR METERS OR VACUUMS 

LIST DISC. 

PRICE CODE 

GIGA TIMER-1200 GIGA TIME IS THE ULTIMATE IN MULTI TIME TIMER TECHNOLOGY. SUPER ULTRA BRIGHT RED LEDS, $694.45 C 

1”H x 5.5”W OPENING EASIER TO READ SCROLLING LETTERS BECAUSE OF THE DUAL ROW LED 

LETTERING, 4 STANDARD SETTINGS FOR TIME AND OR COINS ON 4 DIFFERENT SERVICE INPUTS, 2 

OPTIONAL TIME/COIN PROGRAMMING SETTINGS, 12 PROGRAMMABLE SERVICES 30 CHARACTER 

SERVICE MESSAGES, SERVICES LIKE “WASH / RINSE / TRIPLE FOAM / etc”, GIGA TIME – “LATCH TIME, 

BONUS TIME, UNLIMITED TIME, MEGA TIME” WHAT EVER NAME YOU CALL IT, “LUCKY TIME” 

PROGRAM, COIN IN BEEP, PROGRAMMABLE LENGTH ON LAST COIN ALERT FROM 1 SECOND TO 

THE FULL LAST “CARD DISPLAY protocol”, 1 COIN AND OR TOKEN INPUT, 1 BILL INPUT, SEPARATE 

RETRIEVABLE COUNTS, HORN OUTPUT, OPTIONS: ON BOARD IR RECEIVER, LUCKY TIME 

ACTIVATION BUTTON, SELECTABLE SPECIALS - 3 DIFFERENT TIMES OR DAYS OF WEEK FOR 

ADDITIONAL PRICE CHANGES PROGRAMMABLE VIA SPECIAL IR REMOTE, 

SIZE 3.125”H x 5.875”W X 1.78”D. PATENT UNDER U.S. PATENT #5,371,681 AND OTHERS PENDING 

GIGA -1200MP STAINLESS STEEL MOUNTING PLATE SIZE 3.125”H x 6.94”W $11.69 B 

GIGA –WHP1 GIGA TIMER #1 POWER WIRING HARNESS $15.31 B 




GIGA TIMER-13 GIGA TIMER RED ENCLOSURE LESS MOUNTING BRACKET C/F B 

GIGA TIMER-1200 

Page 16

MODEL 

NUMBER 

DESCRIPTION 

SPARE PARTS FOR METER BOXES 

LIST DISC. 

PRICE CODE 

MB199-H HARDENED STEEL SECURITY BAR $6.93 B 

MB199-S STAINLESS STEEL SECURITY BAR FOR MB100, MBP100, MCD100, & MCP100 METER BOXES $23.08 B 

MB199-S150 STAINLESS STEEL SECURITY BAR FOR MB150 & MCD150 METER BOXES $24.36 B 

MB199-S155 STAINLESS STEEL SECURITY BAR FOR MB155, MCD155, MB155V, & MCD155V METER BOXES $25.39 B 

MB199-S155W STAINLESS STEEL SECURITY BAR FOR MB155W, MCD155W, MB155WV, & MCD155WV METER BOXES $26.39 B 

MB199-2M METAL 2 STACK 8 POSITION ROTARY SWITCH $35.90 B 

MB199-2M10 METAL 2 STACK 10 POSITION ROTARY SWITCH $84.00 B 

MB199-3M METAL 3 STACK 8 POSITION ROTARY SWITCH $56.78 B 

MB199-3M10 METAL 3 STACK 10 POSITION ROTARY SWITCH $129.95 B 

MB199-3 TUBULAR CAM LOCK WITH 1 KEY $15.38 A 

MB199-3K KEY FOR TUBULAR CAM LOCK $5.00 A 

MB199-3S MEDICO TUBULAR CAM LOCK WITH 1 KEY FOR HIGHER SECURITY $43.50 A 

MB199-3V TUBULAR CAM LOCK WITH 1 KEY AND SPECIAL KEY NUMBERS $15.38 A 

MB199-4 TUBULAR SCREW LOCK WITH 1 KEY $18.93 A 

MB199-4K KEY FOR TUBULAR SCREW LOCK $5.00 A 

MB199-4-150 LONG SHANK TUBULAR SCREW LOCK WITH 1 KEY FOR MCD150 $18.93 A 

***FOR SPECIAL ORDER KEY NUMBERS OR LOCKS ADD $5.00 EACH*** 

$5.00 NET 

MB199-4N NUT & CLIP TO BE MOUNTED IN METER BOX FOR SCREW LOCK $2.30 D 

MB199-7 WILSON BUCHANAN PIN LOCK WITH 1 KEY $18.99 A 

MB199-7K KEY FOR WILSON BUCHANAN PIN LOCK $5.00 A 

MB199-7P WILSON BUCHANAN PIN LOCK WITH PIN INCLUDED $20.99 A 

MB199-8 HEATER, 24 VAC, 25 WATTS $12.50 D 

MB199-8SH HEATER, 24 VAC, 25 WATTS SPECIAL FOR HYDRO SPRAY – NO HEAT SINK AND SPECIAL ENDS $15.65 D 

MB199-9 12 LUG TERMINAL STRIP 20 AMP $3.25 D 

MB199-10 18 LUG TERMINAL STRIP 20 AMP $6.50 D 

MB199-12 POINTER KNOB FOR 8 OR 10 POSITION ROTARY SWITCHES $3.85 D 

MB199-13 AMERICAN LOCK 2000 SERIES WITH 2 KEYS $45.30 A 

MB199-13I AMERICAN LOCK INSERT WITH 2 KEYS $17.78 A 

MB199-13K KEY FOR AMERICAN LOCK 2000 SERIES (SPECIAL ORDER) $5.00 A 

MB199-13M AMERICAN LOCK 2000 SERIES MOUNTED ON METER BOX $45.30 A 

MB199-14 3 PART CHANGEABLE OVAL SERVICE DOOR DECAL WITH WAND (COMPLETE) $17.33 D 

MB199-14L 3 PART CHANGEABLE OVAL SERVICE DOOR DECAL FOR LAST COIN ALERT $17.33 D 

MB199-15 SET OF CIRCULAR SPOTS FOR MB 199-14 (13 SERVICE SPOTS & 5 PRICE) $8.79 D 

MB199-16 SET OF CIRCULAR SPOTS FOR DEC100 & DEC200 $12.49 D 

MB199-17 MEDICO LOCK WITH 1 KEY (PLUG ONLY) $42.44 A 

MB199-17K MEDICO KEY FOR MB199-17 (PLUG LOCK) $8.46 A 

MB199-18 MEDICO SCREW LOCK WITH 1 KEY $44.15 A 

MB199-19A AMBER INDICATOR LIGHT 120VAC $4.71 B 

MB199-19G GREEN INDICATOR LIGHT 120 VAC $4.71 B 

MB199-19R RED INDICATOR LIGHT 120 VAC $4.71 B 

MB199-20A AMBER INDICATOR LIGHT 24 VAC $3.30 B 

MB199-20G GREEN INDICATOR LIGHT 24 VAC $3.30 B 

MB199-20R RED INDICATOR LIGHT 24 VAC $3.30 B 

MB199-22 PLASTIC COIN CATCHER $2.50 B 

MB199-23 ELECTRONIC KEY SWITCH LOCK – N/O CONTACTS- WITH 2 KEYS $44.15 A 


TERMINAL STRIPS 

MB199-26 12 LUG TERMINAL STRIP 30 AMP $4.95 B 



FS500 12 TERMINAL FANNING STRIP $13.25 C 

FS600 16 TERMINAL FANNING STRIP $14.19 C 

Page 17

MODEL 

NUMBER 

DESCRIPTION 

SNUBBERS & SNUBBER TERMINAL BLOCKS 

LIST DISC. 

PRICE CODE 

ST1.0 1.0 µF AND 4.7 OHM ¼ WATT RESISTOR $1.00 C 

ST022 .022 µF AND 100 OHM ¼ WATT RESISTOR $1.00 C 

ST047 .047 µF AND 20 OHM ¼ WATT RESISTOR $1.00 C 

ST39 SNUBBER TERMINAL $1.00 C 

ST100 12 POSITION TERMINAL BLOCK WITH BUILT IN SNUBBERS TO ELIMINATE VOLTAGE SPIKING $20.00 C 



ST301 SAME AS ST300 PLUS COIN SIGNAL BLOCK ON BILL ACCEPTOR LINE FOR VAC UP SYSTEMS $38.28 C 

ST500 BLUE VARISTOR CLAMP OFF AT 130 $1.00 C 

ST510 RED VARISTOR CLAMP OFF AT 390 $1.00 C 

CP105 1.0 µF 250 VOLT CAPACITOR $1.00 C 

DECALS FOR METER BOXES 

DEC100 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 8 POSITION SWITCH $27.49 D 

DEC100-10 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $34.61 D 


DEC150-10 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $34.61 D 


FOR MB155, MB155W & MCD155 METERS 

DEC155V MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH & $47.57 D 

BILL ACCEPTOR FOR MB155V, MB155WV & MCD155V METERS 

DEC315 CUSTOM NAME INSERTS FOR DEC100, DEC150 & DEC155 $C/F D 

(300 PIECES MINIMUM ORDER PLUS ONE TIME ART/PLATE CHARGE OF $150.00) 


SET UP FOR “DON R HAVENS” METERS WITH 1 OR 2 COIN XEPTORS 

DECPS200 MULTI COLORED PermaSwitch PS200® DECAL WITH SERVICE SPOTS ONLY $21.97 D 

MB199-14 3 PART CHANGEABLE DECAL WITH WAND (COMPLETE) $17.33 D 

MB199-15 SET OF CIRCULAR SPOTS & PRICES FOR MB199-14 AND MB199-14L $8.79 D 

MB199-16 SET OF CIRCULAR SPOTS & PRICES FOR DEC100, DEC150, DEC155, & DEC200 $12.49 D 


BS WR2 WICKET METER BOX DECAL “ TAP CARD HERE” SIZE 1.5” x 1.5” $2.58 D 

BS200/15 SET OF 15 CIRCULAR SPOTS (0.65”) FOR DECPS200 $11.89 D 

BS200-WS 0.65” ORANGE “WASH/SOAP” SPOT FOR METER DECALS $0.93 D 

BS200-ABD 0.65” BLUE “AIR BLOW DRY” SPOT FOR METER DECALS $0.93 D 

BS200-RN 0.65” WHITE “RINSE” SPOT FOR METER DECALS $0.93 D 

BS200-HW 0.65” GREEN “HIGH PRESSURE WAX” SPOT FOR METER DECALS $0.93 D 

BS200-CCP 0.65” GREEN “CLEAR COAT PROTECTANT” SPOT FOR METER DECALS $0.93 D 

BS200-FW 0.65” GREEN “LOW PRESSURE FOAM WAX” SPOT FOR METER DECALS $0.93 D 

BS200-OFF 0.65” RED “OFF” SPOT FOR METER DECALS $0.93 D 

BS200-STP 0.65” RED “STOP” SPOT FOR METER DECALS $0.93 D 

BS200-ET 0.65” YELLOW “ENGINE/TIRE CLEANER” SPOT FOR METER DECALS $0.93 D 

Page 18

MODEL 

NUMBER 

DESCRIPTION 


LIST DISC. 

PRICE CODE 

BS200-EC 0.65” YELLOW “ENGINE CLEANER” SPOT FOR METER DECALS $0.93 D 

BS200-TC 0.65” YELLOW “TIRE CLEANER” SPOT FOR METER DECALS $0.93 D 

BS200-FB 0.65” BLUE “FOAM BRUSH” SPOT FOR METER DECALS $0.93 D 

BS200-PS 0.65” PINK “PRESOAK” SPOT FOR METER DECALS $0.93 D 

BS200-SFR 0.65” ROSEMAN RED “SPOT FREE RINSE” SPOT FOR METER DECALS $0.93 D 

BS200-MCB 0.65” BLUE “MULTI-COLOR FOAM BRUSH” SPOT FOR METER DECALS $0.93 D 

BS200-MCP 0.65” GREEN “MULTI-COLOR FOAM PROTECTANT” SPOT FOR METER DECALS $0.93 D 

BS513 1 ¾” x 2 1/8” “DOLLARS ONLY” DECAL FOR METER BOXES $3.65 D 

BS514 1 ¾” x 2 1/8” “QUARTERS OR DOLLARS” DECAL FOR METER BOXES $3.65 D 

BS515 1 ¾” x 2 1/8” “TOKENS OR DOLLARS” LEXAN DECAL FOR METER BOXES $3.65 D 

BS516 1 ¾” x 2 1/8” “TOKEN / QUARTER / DOLLAR” LEXAN DECAL FOR METER BOXES $3.65 D 

BS517 7 ½” x 11 ½” LEXAN “EXTRA TIME” SIGN FOR MOUNTING IN BAY $18.83 D 

BS518 1 ¾” x 2 1/8” “TOKEN ONLY” LEXAN DECAL FOR METER BOXES $3.65 D 

BS519 2” x 3” “X-TRA TIME” DECAL FOR METER BOX $3.65 D 

BS520 3” x 3” “LAST COIN ALERT” DECAL FOR METER BOX $3.65 D 

BS521 1 ¾” x 2 1/8” “QUARTERS ONLY” LEXAN DECAL FOR METER BOXES $3.65 D 

BS522 1 ¾” x 2 1/8” “TOKEN & QUARTERS” LEXAN DECAL FOR METER BOXES $3.65 D 

BS523-ABD 7/8” BLUE “AIR BLOW DRY” SPOT FOR METER DECALS $0.68 D 

BS523-WS 7/8” ORANGE “WASH/SOAP” SPOT FOR METER DECALS $0.68 D 

BS523-RN 7/8” WHITE “RINSE” SPOT FOR METER DECALS $0.68 D 

BS523-HW 7/8” GREEN “HIGH PRESSURE WAX” SPOT FOR METER DECALS $0.68 D 

BS523-CCP 7/8” GREEN “CLEAR COAT PROTECTANT” SPOT FOR METER DECALS $0.68 D 

BS523-FW 7/8” GREEN “LOW PRESSURE FOAM WAX” SPOT FOR METER DECALS $0.68 D 

BS523-OFF 7/8” RED “OFF” SPOT FOR METER DECALS $0.68 D 

BS523-STP 7/8” RED “STOP” SPOT FOR METER DECALS $0.68 D 

BS523-ET 7/8” YELLOW “ENGINE/TIRE CLEANER” SPOT FOR METER DECALS $0.68 D 

BS523-EC 7/8” YELLOW “ENGINE CLEANER” SPOT FOR METER DECALS $0.68 D 

BS523-TC 7/8” YELLOW “TIRE CLEANER” SPOT FOR METER DECALS $0.68 D 

BS523-FB 7/8” BLUE “FOAM BRUSH” SPOT FOR METER DECALS $0.68 D 

BS523-PS 7/8” PINK “PRESOAK” SPOT FOR METER DECALS $0.68 D 

BS523-SFR 7/8” ROSEMAN RED “SPOT FREE RINSE” SPOT FOR METER DECALS $0.68 D 

BS523-BNK 7/8” DARK BLUE BLANK FOR METER DECALS $0.68 D 

BS523-MCB 7/8” BLUE “MULTI-COLOR FOAM BRUSH” SPOT FOR METER DECALS $0.68 D 

BS523-MCP 7/8” GREEN “MULTI-COLOR FOAM PROTECTANT” SPOT FOR METER DECALS $0.68 D 

BS524 7/8” “LAST COIN ALERT” INSERT FOR DEC100 OR DEC150 DECAL $0.68 D 

BS525 7/8” CIRCULAR INSERT FOR DEC100 “TOKENS OR QUARTERS” $0.68 D 

BS526 7/8” CIRCULAR INSERT FOR DEC100 “TOKENS ONLY” $0.68 D 

BS530 SET OF 5 PRICE SPOTS FOR MB199-14 & MB199-14L $2.77 D 

BS532 SET OF 6 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS $7.40 D 

BS532-12L SET OF 12 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS FROM $0.50 THRU $3.25 $14.80 D 

BS532-12H SET OF 12 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS FROM $2.25 THRU $5.00 $14.80 D 

METER BOX PRICE SPOTS 

BS532-050 2 1/8” “50¢” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D 

BS532-075 2 1/8” “75¢” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D 

BS532-100 2 1/8” “$1.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D 









Page 19

MODEL 

NUMBER 

DESCRIPTION 

METER BOX PRICE SPOTS 

LIST DISC. 

PRICE CODE 









STAINLESS STEEL LIGHTED MENU FRAMES 

MS302 STAINLESS STEEL SELECTIVE LIGHTED FRAME FOR 8 POSITION ROTARY SWITCH WITH CAM LOCK $381.45 B 

AND REMOVABLE DOOR (USE WITH MS100 OR MS100-W) 8 INDIVIDUAL 24VAC LIGHTS TO 

ILLUMINATE EACH SPOT WHEN CUSTOMER TURNS THE ROTARY SWITCH 

MS302-8HGP REPLACEMENT LIGHTED PANEL FOR MS302 LIGHTED 8 POSITION MENU FRAME $168.30 B 

MS302-10 STAINLESS STEEL SELECTIVE LIGHTED FRAME FOR 10 POSITION ROTARY SWITCH WITH CAM LOCK $426.82 B 

AND REMOVABLE DOOR (USE WITH MS150 OR MS150-W) 10 INDIVIDUAL 24VAC LIGHTS TO 

ILLUMINATE EACH SPOT WHEN CUSTOMER TURNS THE ROTARY SWITCH 

MS302-10HGP REPLACEMENT LIGHTED PANEL FOR MS302-10 LIGHTED 10 POSITION MENU FRAME $168.30 B 

MS302-O “OLIVATOR” LED LIGHTED INSERT FOR THE MS302 LIGHTED MENU SIGN. THE LED’S LIGHT OUT $132.62 B 

FROM THE CENTER TO EACH FUNCTION THAT IS ON, DRAWING ATTENTION TO EACH FUNCTION 

SELECTED. THE BRIGHT LED’S WILL ENHANCE THE APPEARANCE OF YOUR BAY. EASILY RETROFIT 

ABLE TO THE MS302 STAINLESS SIGN. 

STAINLESS STEEL MENU FRAME 

MS400-R1 STAINLESS STEEL FRAME (24” x 36”) FOR MENU SIGN (2 PARTS WITH TABS) DESIGNED TO ACCEPT $73.30 B 

BOTH THE MS100B-W AND MS100-10W MENU SIGNS MOUNTING TABS ON OUTSIDE 

MS400-R2 STAINLESS STEEL FRAME (24” x 36”) FOR MENU SIGN (2 PARTS WITH TABS) DESIGNED TO ACCEPT $73.30 B 

BOTH THE MS100B-W AND MS100-10W MENU SIGNS MOUNTING TABS ON INSIDE 

8 POSITION LEXAN ® BAY MENU SIGNS 

MS100B-W 8 POSITION BAY MENU SIGN WITH WARNING INSERT FOR WINDOW – SIZE 23.5” x 35.5”. $64.31 D 

SPOTS (MS200) USES 8 CIRCULAR SPOTS SAME COLORED SAME AS METER DECALS (BS523) 

WITH LAMINATED INSTRUCTION SPOTS WHICH ARE ADHESIVE TO BACK OF MENU SIGN. 

CAN BE MOUNTED INSIDE MS302 LIGHTED FRAME OR MS400 STAINLESS STEEL FRAME. 

MS100B 8 POSITION BAY MENU SIGN HAS WINDOW TO VIEW BIG TIME (BT800B OR BT902). CAN BE $60.65 D 

MOUNTED INSIDE MS302 LIGHTED FRAME. SAME AS MS100W EXCEPT FOR WINDOW. 

10 POSITION LEXAN ® BAY MENU SIGNS 

MS100-W10 10 POSITION BAY MENU SIGN WITH WARNING INSERT FOR WINDOW – SIZE 23.5” x 35.5”- $78.00 D 

USES 10 CIRCULAR SPOTS (MS200) COLORED SAME AS METER DECALS (DECPS200) WITH 

LAMINATED INSTRUCTION SPOTS WHICH ARE ADHESIVE TO BACK OF MENU SIGN. CAN BE 

MOUNTED INSIDE MS302-10 LIGHTED FRAME OR MS400 FRAME. 

MS100-10 10 POSITION BAY MENU SIGN HAS WINDOW TO VIEW BIG TIME (BT800B OR BT902). CAN BE $74.78 D 

MOUNTED INSIDE MS302-10 LIGHTED FRAME. SAME AS MS100-W10 EXCEPT FOR WINDOW. 

WICKET BAY INSTRUCTION SIGN 

BS WR1 WICKET BAY INSTRUCTION SIGN SIZE 8.5” x 11” UV PROTECTED PLASTIC $25.11 D 

Page 20

MODEL 

NUMBER 

DESCRIPTION 

INSTRUCTION SPOTS FOR MS100B, MS100B-W, & MS150-W 

LIST DISC. 

PRICE CODE 

MS200-WS ORANGE “WASH/SOAP” INSTRUCTION SPOT $2.82 D 

MS200-RN WHITE “RINSE” INSTRUCTION SPOT $2.82 D 

MS200-HW GREEN “HIGH PRESSURE WAX” INSTRUCTION SPOT $2.82 D 

MS200-LFW GREEN “LOW PRESSURE FOAM WAX” INSTRUCTION SPOT $2.82 D 

MS200-CCP GREEN “CLEAR COAT PROTECTANT” SPOT $2.82 D 

MS200-OFF RED “OFF” INSTRUCTION SPOT $2.82 D 

MS200-STP RED “STOP” INSTRUCTION SPOT $2.82 D 

MS200-ET YELLOW “ENGINE/TIRE CLEANER” INSTRUCTION SPOT $2.82 D 

MS200-EC YELLOW “ENGINE CLEANER” INSTRUCTION SPOT $2.82 D 

MS200-TC YELLOW “TIRE CLEANER” INSTRUCTION SPOT $2.82 D 

MS200-FB BLUE “FOAM BRUSH” INSTRUCTION SPOT $2.82 D 

MS200-PS PINK “PRESOAK” INSTRUCTION SPOT $2.82 D 

MS200-SFR ROSEMAN RED “SPOT FREE RINSE” INSTRUCTION SPOT $2.82 D 

MS200-BNK BLUE BLANK INSTRUCTION SPOT $2.82 D 

SPECIAL INSTRUCTION SPOTS FOR MS100B, MS100B-W, & MS150-W 

MS201-ABD BLUE “AIR BLOW DRY ” INSTRUCTION SPOT $2.82 D 

MS201-EC GREEN “ENGINE CLEANER” INSTRUCTION SPOT $2.82 D 

MS201-FW YELLOW “FOAM WAX” INSTRUCTION SPOT $2.82 D 

MS201-FB ORANGE “FOAM BRUSH” INSTRUCTION SPOT $2.82 D 

MS201-WS PINK “WASH/SOAP” INSTRUCTION SPOT $2.82 D 

MS201-FLW YELLOW “FOAMING LEMON WAX” INSTRUCTION SPOT $2.82 D 

MS201-RG WHITE “RINSE AND GO” INSTRUCTION SPOT $2.82 D 

MS201-TB GREEN “TIRE BRUSH” INSTRUCTION SPOT $2.82 D 

MS201-PS BLUE “PRESOAK” INSTRUCTION SPOT $2.82 D 

MS201-HFW RED “HIGH PRESSURE FOAM WAX” INSTRUCTION SPOT $2.82 D 

MS201-MCB BLUE “MULTI-COLOR FOAM BRUSH” INSTRUCTION SPOT $2.82 D 

MS201-MCP GREEN “MULTI-COLOR FOAM COAT PROTECTANT” SPOT $2.82 D 

SPECIAL INSTRUCTION SPOTS ENGLISH & SPANISH FOR MS100B, MS100B-W, & MS150-W 

MS202-WS ENGLISH & SPANISH ORANGE “WASH/SOAP” INSTRUCTION SPOT $3.54 D 

MS202-RN ENGLISH & SPANISH WHITE “RINSE” INSTRUCTION SPOT $3.54 D 

MS202-HW ENGLISH & SPANISH GREEN “HIGH PRESSURE WAX” INSTRUCTION SPOT $3.54 D 

MS202-CCP ENGLISH & SPANISH GREEN “CLEAR COAT PROTECTANT” INSTRUCTION SPOT $3.54 D 

MS202-MCP ENGLISH & SPANISH GREEN “MULTI COLOR FOAM PROTECTANT” INSTRUCTION SPOT $3.54 D 

MS202-OFF ENGLISH & SPANISH RED “OFF” INSTRUCTION SPOT $3.54 D 

MS202-ET ENGLISH & SPANISH YELLOW “ENGINE/TIRE CLEANER” INSTRUCTION SPOT $3.54 D 

MS202-EC ENGLISH & SPANISH YELLOW “ENGINE CLEANER” INSTRUCTION SPOT $3.54 D 

MS202-TC ENGLISH & SPANISH YELLOW “TIRE CLEANER” INSTRUCTION SPOT $3.54 D 

MS202-FB ENGLISH & SPANISH BLUE “FOAM BRUSH” INSTRUCTION SPOT $3.54 D 

MS202-PS ENGLISH & SPANISH PINK “PRESOAK” INSTRUCTION SPOT $3.54 D 

MS202-SFR ENGLISH & SPANISH ROSEMAN RED “SPOT FREE RINSE” INSTRUCTION SPOT $3.54 D 

ACCESSORIES FOR FRAMES AND SIGNS 

MS310 REPLACEMENT LAMP FOR MS302 LIGHTED FRAME $1.65 D 

MS312 LAMP SOCKET FOR MS302 LIGHTED FRAME $7.22 D 

MS315 CUSTOM NAME STRIPS 2 COLOR FOR MS 100 $C/F D 

(250 PIECE MINIMUM ORDER PLUS ONE TIME ART/PLATE CHARGE OF $125.00) 

MS316 BLANK NAME STRIP FOR MS 100 $2.85 D 

MS526 DECAL WARNING INSERT FOR MS 100 $4.90 D 

MS400-T REPLACEMENT TOP FOR STAINLESS STEEL FRAME MS400-R1 & MS400-R2 $55.62 B 

Page 21

MODEL 

NUMBER 

DESCRIPTION 

SMART SELECTOR SWITCHES 

LIST DISC. 

PRICE CODE 

PS200 PermaSwitch PS200 10 POSITION ELECTRONIC SELECTOR SWITCH INTERCHANGEABLE WITH MOST $375.00 B 

8 OR 10 POSITION MECHANICAL ROTARY WITH MINIMUM MODIFICATION. POSITIVE PUMP ON WITH 

NO DELAY BETWEEN HIGH PRESSURE CYCLES, WASHDOWN – 10 MIN. CYCLE, 2.5AMP LOAD PER 

EACH OUTPUT INCREASES LIFE OF TIMERS, DANCING LED’s DRAWS ATTENTION & HIGHLIGHTS THE 

SERVICES SELECTED, INTERNAL BEEPER ALERTS USER OF THEIR SELECTED SERVICE. 

U.S. PATENT # 5,371,681 

ACCESSORIES FOR PS200 

PS200-10 TOUCH PAD ASSEMBLY FOR PS200 READY TO MOUNT ON DOOR, COMPLETE WITH DECPS200 $99.95 B 

DECALS, SHOCK ABSORBING GASKET, BACK PLATE WITH GASKET AND MOUNTING HARDWARE. 

PS200-CB INTERCONNECTING BOARD FOR PS200 $47.17 B 

PS200WIRHRNS REPLACEMENT WIRING HARNESS FOR PS200 PermaSwitch $23.08 B 

DECPS200 MULTI-COLORED PermaSwitch PS200 DECAL WITH SERVICE SPOTS $21.97 D 

MA72-P RELAY OUTPUT MODULE FOR PS200 FOR 3 RD STACK $33.50 C 

PS200 

REMOTE CONTROL 

RC800 REMOTE CONTROL TO FIELD CHANGE THE SCROLLING MESSAGES IN IDX DISPLAYS, DISPLAY $153.85 B 

TIMERS, OR MESSAGE CENTERS. YOU CAN ALTER CYCLE TIME, ALTER COINS TO START, CHECK 

AND CLEAR COIN COUNT, SET TIME FOR LAST MINUTE ALERT, AND FIELD CHANGE 3 PERSONALIZED 

MESSAGES TOTALING 108 CHARACTERS. 

IR800 THE “Interfacer” INCLUDES THE BEST FEATURES OF OUR RC800 HANDHELD REMOTE PLUS $230.77 B 

SECURE INFRARED COMMUNICATION. RETRIEVE COIN COUNTS & CHANGE MESSAGES FOR ALL 

STANDARD IDX DISPLAYS & DISPLAY TIMERS. WITH THE BTNS6B AND LATER DISPLAY PROCESSOR 

CODE YOU CAN PROGRAM A FREE WASH CYCLE OR “CLONE” SEVERAL DISPLAYS EASILY. 

REQUIRES IRM800 (INFRARED REMOTE MODULE) FOR EACH DISPLAY / TIMER. 

**NOT TO BE USED WITH BT922, BS820, OR GT1200** 

PARTS AND ACCESSORIES FOR REMOTES 

IRM800 INFRARED RECEIVER FOR IR800 TO CONVERT IDX DISPLAYS / DISPLAY TIMERS FOR USE WITH $53.82 B 

INFRARED REMOTE CONTROL. 

IR800- IR800 PC SOFTWARE DISC TO PRE-PROGRAM IR800 WASH DOWN CYCLE, CHANGE MESSAGES, & $55.00 B 

SOFTWARE LOCK DOWN IR800. **NOT TO BE USED WITH BT922, BS820, OR GT1200** 

CM45308 CABLE TO CONNECT IR800 REMOTE TO PC ALLOWING YOU TO PROGRAM CLONE INFORMATION $9.92 C 

AND / OR SET WASH DOWN CYCLE CODE AND TIME. 

BT54 COILED CORE FOR RC800 $16.66 C 

Page 22

MODEL 

NUMBER 

DESCRIPTION 

INTERFACE MODULES 

LIST DISC. 

PRICE CODE 

IB100 TO CONVERT 24VAC WASH CYCLE COUNTERS TO COUNT COINS NOT CYCLES – 24 / 120VAC INPUT $58.34 C 

IB100-AC SENDS A/C SIGNAL TO COIN COUNTER $75.00 C 

OCTAL HOUR METER / COUNTER 

BD200 OCTAL HOUR METER / COUNTER – EIGHT INDUSTRIAL HOUR METERS / EVENT COUNTER. THIS UNIT $416.67 C 

HAS EIGHT FLEXIBLE INPUTS THAT CAN BE USED AS HOUR METERS OR EVENT COUNTERS. USE 

WITH 24VAC OR 24VDC SIGNALS. DISPLAYS TIME ELAPSED SINCE LAST RESET. CAN SAVE 

INFORMATION THROUGH A POWER OUTAGE. AUTOMATICALLY ADJUSTS DISPLAY RESOLUTION. 

PROGRAMMED THROUGH A RC800 REMOTE. CASE SIZE 3.35”Wx3.80”Hx3.15”D 

LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR AND CAM LOCK – SIZE 6”W x 5 9/16”H x 5”D – $100.00 B 

FOR WALL MOUNT. TO BE USED WITH BD200, LTT800, LTT802, LST800, AND LST802. 

PLUG IN TIMERS 

INDUSTRIAL GRADE U.S. PATENT #4,976,346 

AT401D 

***NO LONGER BUILT HAS BEEN REPLACED BY AT402*** 

AT402 24VAC ACCUMULATING TIMER CHANGEABLE BY 1 SEC PER COIN SETTINGS. SHORT CIRCUIT $119.95 C 

PROOF OUTPUT. (USES DS511 SOCKET) 

OPTIONS FOR MODEL AT402 

THESE OPTIONS ARE FACTORY INSTALLED ONLY AND CANNOT BE FIELD INSTALLED. 

(TO SPECIFY OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER.) 

-C ACCUMULATING TIMER FOR PATENT #4,976,346 COUNTER OPTION W/ HIGH SECURITY OUTPUT FOR $10.00 C 

COIN COUNTER 

-L AUXILIARY OUTPUT ALERT PLUS AUXILIARY OUTPUT FOR COIN COUNTER. LAST COIN ALERT, 1 $15.00 C 

OUTPUT FOR LIGHT AND 1 OUTPUT FOR 24VDC HORN. 

-X OPTIONAL OUTPUT FOR X-TRA TIME – EXTENDS 20 SECOND PERIOD AFTER SERVICE TIME HAS $15.00 C 

EXPIRED FOR CUSTOMER TO DEPOSIT ADDITIONAL COINS FOR EXTRA TIME. AUX. OUTPUT WILL 

PULSE LIGHT 20 TIMES FOR VISUAL INDICATION. 

MOST OF THE ABOVE OPTIONS MAY BE COMBINED INTO A SINGLE TIMER TO 

ACCOMPLISH ALL YOUR NEEDS. 

OPTIONS –L & -X CANNOT BE COMBINED 

ACCESSORY MODULES FOR PLUG IN TIMERS 

LC521-DC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) D/C TYPE USE WITH AT402-L, AT403-L $80.00 C 

LC525-DC LAST COIN ALERT. SAME AS LC521-DC NO PLUG-IN HOUSING (24 VAC) $41.67 C 

DS508 8 PIN SOCKET ( CAN BE DIN RAIL MOUNTED) $5.83 C 

DS511 11 PIN SOCKET ( CAN BE DIN RAIL MOUNTED) $7.25 C 

DS513 DIN RAIL (SPECIFY LENGTH IN INCHES) C/F C 

AT402 

Page 23

MODEL 

NUMBER 

DESCRIPTION 

FLAT PACK TIMERS 

INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN) 

LIST DISC. 

PRICE CODE 

AF411 BLOW DOWN TIMER FOR AUTOMATIC CAR WASH THAT CAN BE ACTIVATED BY TREADLE SWITCH, $200.10 C 

THERMOSTAT, OR TIMER IN SELF SERVICE BAYS. 

AT411E ACCUMULATING TIMER- COIN INPUT ONLY, INPUT & OUTPUT VOLTAGE 115VAC OR 24VAC $94.95 C 

2- 25 AMP SCR OUTPUTS MOUNTED ON ALUMINUM HEAT SINK 

AT411E-1 NON-ACCUMULATING TIMER (FOR USE IN COIN VAC SYSTEMS, TO INHIBIT BILL CHANGER FROM $116.58 C 

DISPENSING ONLY A SET AMOUNT OF COINS WITH A TIME DELAY BETWEEN SET AMOUNTS) 

AT412 ACCUMULATING TIMER-COIN INPUT ONLY, INPUT & OUTPUT VOLTAGE 220VAC OR 24VAC (USE ONLY $112.95 C 

W/ 220VAC WITH ONE SIDE GROUNDED) 

FLAT PACK TIMERS 

INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN) 

AT413 ACCUMULATING TIMER – 24VAC COIN ACCEPTOR OUTPUT, 115VAC OR 24VAC INPUT & OUTPUT $129.00 C 

VOLTAGE- (2) 25AMP SCR OUTPUTS-256 COIN ACCUMULATION, AUTOMATIC RESETABLE FUSE ON 

24VAC TERMINAL TO PROTECT COIN ACCEPTOR. 

AT414 ACCUMULATING TIMER – 24VAC COIN ACCEPTOR OUTPUT, 220VAC OR 24VAC INPUT & OUTPUT $144.00 C 

VOLTAGE- (2) 25AMP SCR OUTPUTS-256 COIN ACCUMULATION, AUTOMATIC RESETABLE FUSE ON 

24VAC TERMINAL TO PROTECT COIN ACCEPTOR 

AT422 DUAL ACCUMULATING TIMER. TWO TIME SWITCHES & TWO COIN TO START SWITCHES, AND A $129.95 C 

CONTROL INPUT LINE TO SWITCH BETWEEN TWO TIME / VALUE SETTINGS AT ANY GIVEN INSTANT. 

INPUT & OUTPUT VOLTAGE 120VAC OR 24VAC (230 VAC OPTIONAL) 

OPTIONS FOR FLAT PACK TIMERS 

THESE OPTIONS ARE FACTORY INSTALLED & CANNOT BE FIELD INSTALLED. 


-L AUXILIARY OUTPUT ALERT OPTION (USE WITH MODEL LC521A/C OR SL560). AUXILIARY OUTPUT $15.00 C 

WILL COME ON FOR LAST 32 SEC. OF TIME. FOR USE ON AT411E, AT412, AT413, & AT422. 

(AUXILIARY OUTPUT VOLTAGE MUST BE THE SAME AS THE LOAD VOLTAGE) 

-X X-TRA TIME OPTION – EXTENDS A 20 SECOND PERIOD AFTER SERVICE TIME EXPIRES, ALLOWING $15.00 C 

CUSTOMERS TO DEPOSIT ADDITIONAL COINS FOR EXTENDED SERVICE. VISUALLY ALERTS 

CUSTOMER BY PULSING INDICATOR LIGHT OR HORN DURING EXTENSION PERIOD. FOR AT411E, 

AT412, AT413 & AT422. 

ACCESSORY MODULES 

FOR AT411, AT412, AT413, AT422 TIMERS 

LC520-AC LAST COIN ALERT CONTINUOUS TONE AC HORN 12- 32VAC $33.34 C 

LC521-AC LAST COIN ALERT PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE FOR 12-32 VAC ONLY $80.00 C 

LC525-AC SAME AS LC521-AC W/NO PLUG-IN HOUSING AND “L” BRACKET FOR MOUNTING $41.67 C 

CB400-L A DEVICE THAT CAN BE FIELD INSTALLED BY CONNECTING 4 WIRES TO COIN “XEPTOR”. WILL BEEP $74.95 C 

EVERY TIME YOUR CUSTOMER PUTS A COIN INTO YOUR ACCEPTOR & BEEP FOR LAST ALERT 

(USE WITH DS511 SOCKET & WIRES) 24/120VAC INPUT 

IB100 TO CONVERT 24VAC WASH CYCLE COUNTERS TO COUNT COINS NOT CYCLES 24V/120 VAC INPUT $58.34 C 

IB100-AC SENDS A/C SIGNAL TO COIN COUNTER $75.00 C 

AT411E 

Page 24

MODEL 

NUMBER 

DESCRIPTION 

DIGITAL DISPLAYS USED WITH EXTERNAL TIMERS 

LIST DISC. 

PRICE CODE 

BT800B BIG TIME CONVERTS MOST 24VAC TIMER TO A DISPLAY TIMER WITH 2” SCROLLING LETTERS $375.00 C 

CASE SIZE 10”W x 7”H x 3”D DISPLAY WILL FLASH FOR LAST MINUTE OF TIME. CHANGEABLE 

SCROLLING MESSAGE OF 29 CHARACTERS. SWITCH SETTABLE FOR X-TRA TIME MESSAGE VIEWING 

AT END OF CYCLE. U.S. PATENT 5,371,681 

BT800B-E BIG TIME DISPLAY MOUNTED IN BT8B STAINLESS STEEL LOW PROFILE CASE WITH CAM LOCK $486.67 C 

LOW PROFILE CASE SIZE 2.5”D x 7.35”H x 12”L 

BT802B BIG TIME WILL TRACK MODEL AT422 OR LTT802 WITH 2 DIFFERENT SERVICES OR 2 DIFFERENT $399.99 C 

COINS TO START TIMES PER COIN. CAN BE SWITCHED BACK AND FORTH. WILL CALCULATE THE 

REMAINING TIME ON THE UNUSED AMOUNT OF MONEY SWITCHING FROM SERVICE TIME A TO B OR 

SERVICE TIME B TO A. WELCOME INTRO MESSAGE OF 72 CHARACTERS & EXIT MESSAGE OF 36 

CHARACTERS. CASE SIZE 10”Wx7”Hx3”D U.S. PATENT 5,371,681. 

BT810B DIGITAL DISPLAY FOR AUTOMATIC BLOWERS WITH HIGH OUTPUT LED’S. WELCOME INTRO $399.99 C 

MESSAGE OF 72 CHARACTERS, 36 CHARACTERS INTERRUPT MESSAGE (EXP: “MOVE UP SLOWLY”). 

HALF-WAY DEDICATED MESSAGE (EXP: “YOU SHOULD BE HALF WAY THROUGH”) 

DD810 DIGITAL DISPLAY FOR AUTOMATIC BLOWERS WITH LOW PROFILE STAINLESS STEEL CASE. $530.99 C 

HD800B-E DIGITAL DISPLAY FOR AUTO CASHIERS WITH HIGH OUTPUT LED’S AND LOW PROFILE STAINLESS $599.95 C 

STEEL CASE SIZE 2.5”D x 7.35”H x 12”W 

LTT800 LITTLE DIGITAL DISPLAY FOR MOUNTING IN METER BOXES OR VACUUMS. CONVERTS MOST TIMERS $316.58 C 

TO A DISPLAY TIMER. U.S. PATENT 5,371,681. 

JUMBO MESSAGE CENTERS 

BS820 ULTRA BRIGHT JUMBO MESSAGE CENTER- MOUNTED IN LOW PROFILE STAINLESS STEEL CASE $997.95 C 

WITH LEXAN® WINDOW. LARGE ULTRA BRIGHT RED LED DISPLAY AREA (2” HIGH x 16” LONG) WITH 

FEATURES OF IDX’S BT912 BIG TIME TWO TIMER PLUS ADDITIONAL FEATURES. STANDARD 

ULTRA HIGH BRIGHT RED LEDS FOR USE IN DIRECT SUN LIGHT, 9 PROGRAMMABLE 30 CHARACTER 

MESSAGES, PROGRAMMABLE WELCOME MESSAGE – 64 CHARACTER: EACH MESSAGE DISPLAYS 

WHEN AN INPUT SEE POWER. EACH MESSAGE WILL SCROLL ONE AFTER THE OTHER AS LONG AS 

POWER IS APPLIED TO THAT INPUT. POWER REQUIREMENTS 24 VAC AT 1AMP - INPUTS 24 VAC 

BS820-A ULTRA BRIGHT JUMBO MESSAGE CENTER- FOR AUTOMATICS SAME SPECS AS BS820 WITH $997.95 C 

ONE EXCEPTION. THE BS820-A WILL DISCONTINUE SCROLLING THE MESSAGE AS SOON AS POWER 

HAS BEEN REMOVED. SIZE 22.25” W x 7.35” H x 2.5” D 

SPECIALTY DISPLAY TIMERS 

LTT802- REPLACEMENT SPECIAL LITTLE TWO TIMER FOR FRAGRAMATICS COMBO $633.99 C 

***DOES NOT INCLUDE STAINLESS STEEL BRACKET*** 

BT902- REPLACEMENT SPECIAL BIG TIME TWO TIMER FOR FRAGRAMATICS COMBO LESS MOUNTING STUDS $683.97 C 

FRAGRA ***DOES NOT INCLUDE WIRING HARNESS OR MOUNTING STUDS*** 

BT907 SPECIAL BIG TIME WITH 7 DIFFERENT TIMES THAT IS USED BY DOYLE VACUUM, IVS, J.E. ADAMS $692.15 C 

LTT802RYKO REPLACEMENT SPECIAL LITTLE TWO TIMER FOR RYKO MANUFACTURING $516.83 C 

BT912-LUCKY BIG TIME TWO TIMER WITH PATENT PENDING LUCKY TIME PROGRAM MOUNTED IN THE BT912 $733.50 C 

STAINLESS STEEN CASE INCLUDES LC525-AC HORN. THIS NEW BIG TIME GIVES THE OPERATOR A 

WAY TO INCREASE REVENUE BY OFFERING HIS CUSTOMERS A CHANGE TO RECEIVE ADDITIONAL 


& COIN IN BEEP OUTPUT, TWO TIME SELECT, RELAY OUT PUT, “CARD- DISPLAY protocol” INDUSTRY 

STANDARD, SIZE- 2.5” D x 7.35” H x 12” W, U.S. PATENT #5,371,681 AND OTHERS PENDING 

LTT802-LUCKY LITTLE TWO TIMER WITH PATENT PENDING LUCKY TIME PROGRAM. GIVES THE OPERATOR A WAY $533.49 C 

TO INCREASE REVENUE BY OFFERING HIS CUSTOMERS A CHANGE TO RECEIVE ADDITIONAL WASH 


& COIN IN BEEP OUTPUT, TWO TIME SELECT, SHORT CIRCUIT PROTECTION, INDUSTRY STANDARD 

CARD DISPLAY protocol, STANDARD 2”W x 3”H HOLE PATTERN, U.S. PATENT #5,371,681 

Page 25

MODEL 

NUMBER 

DESCRIPTION 

DIGITAL DRYER TIMER 

LIST DISC. 

PRICE CODE 

LDD910 LITTLE TWO TIMER W/SPECIAL PROGRAM TO CONTROL AUTOMATIC BLOWERS, HIGH OUTPUT LEDS $533.66 C 

FOR BETTER VISIBILITY, COIN ACCEPTOR DISABLE CIRCUIT, RESET CIRCUIT FOR EARLY DRIVE OUT 

COIN IN BEEP, PROMPT FOR ADDITIONAL COINS FOR ADDITIONAL TIME. STANDARD METER BOX 

FOOT PRINT U.S. PATENT 5,371,681. 

DD910 DRYER TIMER WITH DIGITAL COUNTDOWN DISPLAY FOR AUTOMATIC BLOWERS WITH HIGH OUTPUT $599.95 C 

LED’S, LOW PROFILE STAINLESS STEEL CASE – 2.5”D x 7.35”H x 12”W. REMOTE RESETABLE, DISABLE 

COIN ACCEPTOR, 5 AMP RELAY OUTPUT, SUNLIGHT VISIBLE LEDS, PROGRAMMABLE WELCOME 

MESSAGE OF 72 CHARACTERS, INTERRUPT MESSAGE (EXP: “MOVE UP SLOWLY”). HALF-WAY 

DEDICATED MESSAGE (EXP: “YOU SHOULD BE HALF WAY THROUGH”) U.S. PATENT 5,371,681 

VENDER TIMERS AND CONTROLS 

BT912-V BIG TIME DIGITAL DISPLAY TIMER DESIGNED TO CONTROL UP TO 9 DIFFERENT ELECTRONIC $767.00 C 

VENDER SHELVES. MOUNTED IN A LOW PROFILE STAINLESS STEEL CASE – 2.5”D x 7.35”H x12”W 

.5 AMP RELAY OUTPUT, COIN-IN BEEPER, DISABLE COIN XEPTOR IF A PRODUCT IS EMPTY & 

SCROLLS “’PRODUCT NAME’ IS EMPTY MAKE A DIFFERENT SELECTION”, SCROLLS PRICING & 

PRODUCT NAME, PROGRAMMABLE- 30 DIFFERENT CHARACTERS FOR EACH PRODUCT, HIGH 

OUTPUT LEDS, & MORE U.S. PATENT 5,371,681 

LTT802-V LITTLE TWO TIMER VERSION OF VENDER TIMER TO CONTROL UP TO (7) SEVEN DIFFERENT $595.24 C 

ELECTRONIC VENDER SHELVES U.S. PATENT 5,371,681 

MAVEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 

1 PER SHELF REQUIRED 

MAVEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 



TO VENDER TIMER 

OPTIONS FOR MODEL BT800B, BT802B, BT810B, DD810, DD910, & HD800B 



-B BURGLAR ALARM HAS VISUAL ALERT, MUST HAVE –H OPTION FOR AUDIBLE ALERT. INCLUDES $33.50 C 

IMPACT SWITCH. 

-F HIGH OUTPUT LED’s FOR BT800B, BT802B, OR HD800B $100.00 C 

-G GREEN ULTRA BRIGHT LED’s FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT800B, BT802B, $200.00 C 

BT810B, HD800B, & DD910. 

OPTIONS FOR MODEL BT800B, BT802B, BT810B, DD810, DD910, & HD800B 



-H AUXILIARY OUTPUT ALERT OPTION (USE WITH MODEL LC521-AC HORN OR SL560 STROBE LIGHT.) $33.50 C 

OUTPUT WILL BE ON FOR 10 SEC. OF LAST MINUTE OF TIME. WITH A RC800, TIME CAN BE SET 10 

SEC. PULSE OR 1 MIN. CONTINUOUS, WHERE THE OUTPUT WILL BE ON FOR LAST MINUTE OF TIME. 

-U RED ULTRA BRIGHT LED’s FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT800B, BT802B, $200.00 C 

BT810B, HD800B, DD810, & DD910. 

-Y YELLOW ULTRA BRIGHT LED’s FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT800B, BT802B, $200.00 C 

BT810B, HD800B, & DD910. 

Page 26

MODEL 

NUMBER 

DESCRIPTION 

ACCESSORY MODULES FOR BT800B, BT802B, BT810B, HD800B & LTT800 

LIST DISC. 

PRICE CODE 

LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE (24VAC) USE WITH BT800B-H, $80.00 C 

BT802B-H & LTT800-H 

DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 C 

LC525-AC SAME AS LC521-AC NO PLUG IN HOUSING (24VAC) $41.67 C 

BT10 FRONT COVER FOR BT800B OR BT802B (WITHOUT DECAL) $48.95 C 

BT11 FRONT COVER FOR BT800B-F WITH RED LENS (WITHOUT DECAL) $48.95 C 

BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C 

BT13 ENCLOSURE FOR BT800B (COMPLETE W/COVER & BOTTOM) (DECALS- BT39, BT40, OR BT41 EXTRA) $98.50 C 

BT13B WHITE BOX ONLY (LESS COVER) FOR BT800B OR BT902 $74.91 C 

BT20 EPROM WITH MESSAGE PLUG IN $20.00 C 

BT31 PROCESSOR CHIP FOR BT800-R FOR 72 CHARACTER MESSAGE $68.33 C 

BT33 REMOTE JACK (BROWN BOX ONLY) $8.25 C 

BT39 DECAL FOR FRAGRAMATIC BIG TIME and DD910 TWO TIME DRYER TIMER $15.15 C 

BT40 DECAL FOR BT800B, HD800B, BT802B, BT810B (PLACE ON BT10) $10.51 C 

BT41 DECAL FOR BT900 SERIES (PLACE ON BT10) $10.51 C 

BT470 110VAC MONITORING DEVICE FOR BT810B $1.66 C 

BT50 LED SEGMENT $16.95 C 

BT51 HIGH OUTPUT LED SEGMENT $21.67 C 

BT51-UG GREEN ULTRA BRIGHT LED $40.00 C 

BT51-UR RED ULTRA BRIGHT LED $40.00 C 

BT51-UY YELLOW ULTRA BRIGHT LED **MODEL BT802B WITH BT8 ENCLOSURE** $40.00 C 

BT52 REMOTE JACK AND CABLE FOR RS-232 (BT902) $16.66 C 

BT53 REMOTE JACK AND CABLE FOR BT800A WITH FORK CONNECTORS $16.66 C 

BT54 COILED CORD FOR THE RC800 $16.66 C 

BT60 LARGE 6 PIN PLUG WITH 4 CONTACTS ** SPECIAL ENDS FOR RC 800 COILED CORDS ** $0.54 B 

BT62 HAND CRIMPING TOOL FOR COILED CORDS $27.27 A 

BT65 IMPACT SENSOR WITH 15 FEET OF WIRE FOR BURGLAR ALARM $33.50 C 

REPLACEMENT CIRCUIT BOARDS FOR BIG TIMES DISPLAYS & TIMERS 

P800B- PRINTED CIRCUIT BOARD FOR BT800B $291.67 C 

P802B- PRINTED CIRCUIT FOR BT802B $316.66 C 

P810B- PRINTED CIRCUIT FOR BT810B DRYER DISPLAY $308.33 C 

PD810- PRINTED CIRCUIT FOR DD810 DRYER DISPLAY $346.10 C 

P920 PRINTED CIRCUIT FOR BS820 JUMBO MESSAGE CENTER SIGN $757.14 C 

P920-A PRINTED CIRCUIT FOR BS820-A JUMBO SIGN FOR AUTOMATICS $757.14 C 

PD910- PRINTED CIRCUIT FOR DD910 DRYER TIMER DISPLAY $416.83 C 

P912-V PRINTED CIRCUIT FOR BT912-V VENDER TIMER $483.67 C 

REPLACEMENT CIRCUIT BOARDS FOR BIG TIMES DISPLAYS & TIMERS 

P902- PRINTED CIRCUIT FOR BT902 BIG TIME TWO TIMERS $383.33 C 

P902-FRAGRA PRINTED CIRCUIT FOR BT902FRAGRA SPECIAL $553.67 C 

P907-HS PRINTED CIRCUIT FOR BT907 BIG TIME SEVEN TIMERS $562.49 C 

P907-HSU PRINTED CIRCUIT FOR BT907 BIG TIME SEVEN TIMERS WITH ULTRA BRIGHT RED LED’S $762.49 C 

P912- PRINTED CIRCUIT FOR BT912 BIG TIME TWO TIMERS WITH RELAY OUTPUT $429.50 C 

P912-LUCKY PRINTED CIRCUIT FOR BT912-LUCKY TIME BIG TIME TWO TIMERS WITH RELAY OUTPUT $490.68 C 

P912-T PRINTED CIRCUIT FOR BT912 LATCH TIME TWO TIMERS WITH RESET CIRCUIT $524.18 C 

P922- PRINTED CIRCUIT FOR BT912 JUMBO TIME TWO TIMERS INCLUDES ULTRA BRIGHT RED LED’S $757.14 C 

Page 27

MODEL 

NUMBER 

DESCRIPTION 

STAINLESS STEEL COVERS FOR BT800B, BT802B, BT810B, BT902, BT912, BT922, 

DD910, HD800B 

LIST DISC. 

PRICE CODE 

BT8 STAINLESS STEEL COVER SLIDE OVER WITH MOUNTING TABS SIZE 10.25”W x 7.25”H x 3.75”D $82.85 B 

BT8B STAINLESS STEEL ENCLOSURE WITH HINGED DOOR & CAM LOCK FOR BT912, DD810, DD910. $195.00 B 

SIZE 12”W x 7.35”H x 2.5”D 

BT8H STAINLESS STEEL COVER SLIDE OVER WITH HINGED FRONT COVER FASTEN BACK OF BT8H TO $131.88 B 

WALL COVER HINGE WILL OPEN. LOCK WITH 3 OF YOUR TAMPER PROOF SCREWS. 

SIZE 10.25”W x 7.25”H x 4.31”D 

BT8E STAINLESS STEEL ENCLOSURE (ONLY 2” DISPLAY SHOWS) WITH CAM LOCK AND REMOVABLE $172.31 B 

SERVICE DOOR. OVERALL SIZE 12”W x 10”H x 3.75”D 

BT8ED STAINLESS STEEL DOOR FOR BT8E ENCLOSURE $86.16 B 

BT8ES STAINLESS STEEL ENCLOSURE FOR BT8E ENCLOSURE $109.66 B 

BT9 STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT922 $205.39 B 

SIZE 22.25”W x 7.35”H x 2.5”D 

DIGITAL BIG TIME CLOCK TIMERS 

BT900 SERIES DUAL CLOCK TIMERS FOR WALL MOUNTING 

BT902 BIG TIME TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING HAS ALL THE CONVENIENCES $483.31 C 

OF THE LITTLE TWO TIMER & THE BIG TIME DISPLAY AND COMBINES THEM INTO ONE UNIT, BT902. 

STANDARD FEATURES INCLUDE HIGH OUTPUT LED’s, LAST MIN. ALERT, TWO TIMER, X-TRA TIME, & 

BONUS TIME. 3 CHANGEABLE MESSAGES VIA RS-232 PORT (CHANGEABLE 72 CHARACTER INTRO, 36 

CHARACTER EXIT MESSAGE); CONTROL INPUT LINE TO SWITCH FROM TIMER A OR TIMER B. (EXP: 

SET DIFFERENT START + CYCLE TIME – DAYLIGHT & DARK / SET DIFFERENT TIME PER COIN FOR 

TIRE CLEANER THAN RINSE. . CASE SIZE 10”W x7”H x 3”D U.S. PATENT #5,371,681 

BT902E BIG TIME TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING IN LOW PROFILE STAINLESS $651.93 C 

STEEL CASE SIZE 12” W x 7.35” H x 2.5” D WITH LC525-AC HORN MOUNTED 

BT902M BIG TIME TWO TIMER WITH THE BT912 CIRCUIT BOARD MOUNTED IN THE BT13 PLASTIC ENCLOSURE $516.81 C 

CASE SIZE 10”W x 7”H x 3”D INCLUDES HORN OUTPUT (–H OPTION) 

BT912 BIG TIME TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING INCLUDES LOW PROFILE $675.00 C 

STAINLESS STEEL CASE. HAS ALL THE SAME FEATURES OF THE BT902-H BIG TIME TWO TIMER 

PLUS THE ADDED FEATURE OF A 5AMP RELAY OUTPUT AND LAST MIN., ALERT HORN MOUNTED. 

IRM800 REMOTE RECEIVER CAN BE ADDED TO WORK WITH THE IR800 INFRARED REMOTE AND THE 

“LATCH TIME “ (–T) OPTION CAN BE ADDED. SIZE 12”W x 7.35”H x 2.5”D (U.S. PATENT #5,371,681) 

BT907 SPECIAL BIG TIME WITH 7 DIFFERENT TIMES THAT IS USED BY DOYLE VACUUM, IVS, J.E. ADAMS $692.15 C 

USED IN COMBO VAC, MOUNTED IN THE BT13 ENCLOSURE, HORN- MODEL #LCC525-AC MOUNTED, 

EACH OF THE 7 SERVICES CAN HAVE DIFFERENT START TIMES AND PRICING. DISPLAY SCROLLS 

EACH MESSAGE AS SERVICE IS SELECTED AND DISPLAYS AMOUNT FOR SERVICE. COULD ALSO BE 

INSTALLED AS A BAY TIMER. CASE SIZE 10”W x 7”H x 3”D (U.S. PATENT #5,371,681) 

BT907-U SAME AS BT907 BUT INCLUDED THE ULTRA BRIGHT RED LED’S. CASE SIZE 10”Wx7”Hx3”D $892.15 C 

OPTIONS FOR MODEL BT900 SERIES 



-B BURGLAR ALARM HAS VISUAL ALERT. INCLUDES SWITCH $33.50 C 

-D DISABLE COIN “XEPTOR” OPTION (Reads visually “Out of Service”, plus turns off COIN “XEPTOR”.) $33.50 C 

-G GREEN ULTRA BRIGHT LED’s FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT902 OR BT912. $200.00 C 

-H AUXILIARY OUTPUT FOR COIN BEEPER, LAST COIN ALERT, X-TRA TIME ALERT & BURGLAR ALARM $33.50 C 

WITH-B OPTION 

-P (INCLUDED IN BT912) OUTPUT IS SHORT-CIRCUIT PROTECTED. $16.66 C 

-T LATCH TIME / WASH AS LONG AS YOU WANT **BT912 ONLY** INCLUDES –D OPTION $92.00 C 

-U RED ULTRA BRIGHT LEDS FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT902 OR BT912 $200.00 C 

Page 28

MODEL 

NUMBER 

DESCRIPTION 

LIST DISC. 

PRICE CODE 

ULTRA BRIGHT **BT922** JUMBO TWO TIMER 

BT922 ULTRA BRIGHT JUMBO TWO TIMER- MOUNTED IN A STAINLESS STEEL CASE W/ LEXAN® WINDOW. $997.95 C 

LARGE ULTRA BRIGHT RED LED DISPLAY AREA (2” HIGH x 16” LONG) WITH ALL THE SAME GREAT 

FEATURES OF IDX’S BT912 BIG TIME TWO TIMER PLUS ADDITIONAL FEATURES. STANDARD 

FEATURES ARE THE ULTRA HIGH BRIGHT RED LEDS FOR DIRECT SUN LIGHT, OPTIONAL (-G) GREEN 

OR (-Y) YELLOW ULTRA BRIGHT LED AT NO ADDITIONAL COST, OUTPUT CAN SWITCH OUT MULTI- 

PULL VOLTAGES 5 TO 24VAC/VDC OR 115VAC – 5AMP SINGLE POLE RELAY, HORN OR STROBE AND 

SHORT CIRCUIT PROOF. SAME OPTIONS AS BT912- (-B) BURGLAR ALARM, (-D) DISABLE COIN “ 

XEPTOR”. THE BT922 SCROLLS THE SERVICE THAT IS IN USE EVERY 10 SEC. WHILE COUNTING 

DOWN. SIZE 22.25” W x 7.35” H x 2.5” D U.S. PATENT #5,371,681 

REMOTES FOR IDX DISPLAY AND DISPLAY TIMERS 

RC800 REMOTE CONTROL TO FIELD CHANGE YOUR SCROLLING MESSAGE IN THE BT800-R, BT800B, BT802- $153.85 B 

R, BT802B, BT810B, BT902, BT912, BT922, LTT802, LTT800 & GT1200 FOR ADVERTISING. IT CAN ALSO 

CHANGE CYCLE TIMES, COINS TO START, CLEAR COIN COUNTS, SET TIME FOR LAST MIN. ALERT, 

AND FIELD CHANGE 3 PERSONALIZED MESSAGES TOTALING 108 CHARACTERS. 

SMART REMOTE CONTROL 

IR800 THE Interface® COMBINES THE BEST FEATURES OF OUR HANDHELD REMOTE (RC800), SECURITY $230.77 B 

WITH INFRARED TO RETRIEVE COIN COUNTS; CHANGE MESSAGES ON BT800B OR BT802 BIG TIME 

DISPLAY / BT912 BIG TIME TWO TIMER, BT922 JUMBO TWO TIMER, OR BT810B DRYER DISPLAY; 

PROGRAM FREE WASH CYCLE IN LTT802 LITTLE TWO TIMER / BT902 BIG TIME TWO TIMER / BT912 / 

BT922 JUMBO TIME. IF DISPLAY TIMER IS EQUIPPED WITH BT6A PROCESSOR MESSAGES CAN BE 

CLONED. 

IRM800 RECEIVERS FOR IR800 TO CONVERT IDX DISPLAYS OR DISPLAY TIMERS TO INFRARED REMOTE $53.82 B 

CONTROL USED WITH LTT802, BT902, BT912 SERIES OF TIMERS WITH BT6 OR LATER PROCESSOR 

SMART REMOTE CONTROL ACCESSORIES 

IR800- IR800 SOFTWARE DISC (“IR Cloner”) TO PRE-PROGRAM IR WASH DOWN CODE, MESSAGES, AND $55.00 B 

SOFTWARE LOCK DOWN IR800. **NOT TO BE USED WITH BT922, BS820, OR GT1200** 

CM45308 CABLE TO CONNECT IR800 REMOTE TO PC THAT WILL ALLOW YOU TO PROGRAM CLONE $9.92 C 

INFORMATION AND / OR SET WASH DOWN CYCLE CODE AND TIME. 

Page 29

MODEL 

NUMBER 

DESCRIPTION 

ACCESSORY PARTS FOR BIG TIME 

LIST DISC. 

PRICE CODE 

BT/LTT- CREDIT CARD PROGRAM CHIP AND EEPROM –(“CARD DISPLAY protocol) $88.30 C 

CDPROGRAM 

BT/LTT-LUCKY LUCKY TIME CHIP AND EEPROM INCLUDES CREDIT( “CARD DISPLAY protocol) $88.30 C 

BT10 FRONT COVER FOR BT800 OR BT802 (WITHOUT DECAL) $48.95 C 

BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C 

BT12-922 RED ACRYLIC LENS FOR BT9 STAINLESS STEEL ENCLOSURE $15.95 C 

BT13 ENCLOSURE FOR BT800 (COMPLETE W/COVER AND BOTTOM) (DECAL- BT39, BT40, OR BT41 EXTRA) $98.50 C 

BT13B WHITE BOX ONLY (LESS COVER) FOR BT800B OR BT902 $74.91 C 

BT20 EPROM WITH MESSAGE PLUG IN $20.00 C 

BT31 PROCESSOR CHIP FOR BT800-R FOR 72 CHARACTER MESSAGE $68.33 C 

BT32 PROCESSOR CHIP FOR BT902 / BT912 $68.33 C 

BT33 REMOTE JACK (BROWN BOX ONLY) $8.25 C 

BT39 DECAL FOR FRAGRAMATIC $15.15 C 

BT40 DECAL FOR BT800B, HD800B, BT802B, BT810B (PLACE ON BT10) $10.51 C 

BT41 DECAL FOR BT900 (PLACE ON BT10), BT912 $10.51 C 

BT51 HIGH OUTPUT LED SEGMENT $21.67 C 

BT51-UG GREEN ULTRA BRIGHT LED $40.00 C 

BT51-UR RED ULTRA BRIGHT LED $40.00 C 

BT51-UY YELLOW ULTRA BRIGHT LED $40.00 C 

BT52 REMOTE JACK AND CABLE FOR RS-232 (BT902) $16.66 C 

BT53 REMOTE JACK AND CABLE FOR BT800A WITH FORK CONNECTORS $16.66 C 

BT54 COILED CORD FOR THE RC800 $16.66 C 

BT60 LARGE 6 PIN PLUG WITH 4 CONTACT ***SPECIAL ENDS FOR RC800 COILED CORDS $0.54 B 

BT62 HAND CRIMPING TOOL FOR COILED CORDS $27.27 A 

BT65 IMPACT SENSOR WITH 15 FEET OF WIRE FOR BURGLAR ALARM $33.50 C 



STAINLESS STEEL COVERS FOR BT800B, BT802B, BT810B, HD800B, BT902, BT922 

BT8 STAINLESS STEEL COVER SLIDE OVER WITH MOUNTING TABS SIZE 10.25”W x 7.25”H x 3.25”D $82.85 B 

BT8B STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT800B-E, BT912, $195.00 B 

DD810B, & DD910 SIZE 12” W x 7.35” H x 2.5” D 

BT8H STAINLESS STEEL COVER SLIDE OVER w/ HINGED FRONT COVER. FASTEN BACK OF BT8H TO WALL. $131.88 B 

COVER HINGE WILL OPEN. LOCK WITH 3 OF YOUR TAMPER PROOF SCREWS. 

SIZE 10.25”W x 7.25”H x 3.25”D 

BT8E STAINLESS STEEL ENCLOSURE (ONLY 2” DISPLAY SHOWS) W/CAM LOCK & REMOVABLE SERVICE $172.31 B 

DOOR. OVERALL SIZE 12”W x 10”H x 3.75”D 

BT8ED STAINLESS STEEL DOOR FOR BT8E ENCLOSURE $86.16 B 

BT8ES STAINLESS STEEL ENCLOSURE FOR BT8E ENCLOSURE $109.66 B 

BT9 STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT922 $205.39 B 

SIZE 22.25” W x 7.35” H x 2.5” D 

Page 30

MODEL 

NUMBER 

DESCRIPTION 

ACCESSORY PARTS FOR LTT800 & LTT802 

LIST DISC. 

PRICE CODE 

BT/LTT199-1 CABLE HOOKUP BETWEEN DISPLAY TIMERS AND LAPTOP OR COMPUTER $20.00 A 

BT/LTT- CREDIT CARD PROGRAM CHIP AND EPROM –(“CARD DISPLAY protocol) $88.30 C 

CDPROGRAM 

BT/LTT-LUCKY LUCKY TIME CHIP AND EPROM INCLUDES CREDIT (“CARD DISPLAY protocol) $88.30 C 

LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR & CAM LOCK SIZE- 6”H x 5 9/16” W x 5” D $100.00 B 

LTT10 RED ACRYLIC LENS FOR FACE OF LTT800 & LTT802 $4.95 C 

LTT11 LTT HOUSING COMPLETE – RED LEXAN $10.00 C 

LTT11-FC LTT FRONT COVER WITH 4 POSTS- RED LEXAN $6.66 C 

LTT11-H LTT HOUSING LESS FRONT COVER – RED LEXAN $8.33 C 

LTT20 EEPROM WITH MESSAGE PLUG IN $20.00 C 

LTT30 PROCESSOR CHIP FOR LTT800 & LTT802 $68.33 C 

LTT40 KEY SWITCH TO KEEP UP WITH WASHDOWN TIME $24.95 B 

LTT41-P1 WIRING HARNESS FOR P-1 HOOK UP ON LTT SERIES $15.31 B 

LTT41-P3 WIRING HARNESS FOR P-3 DISABLE ON LTT SERIES $15.31 B 

LTT41-P3S WIRING HARNESS FOR P-3 HOOK UP WITH ALL OPTIONS $16.85 B 

LTT51 HIGH OUTPUT LED SEGMENT FOR LTT800 & LTT802 $21.67 C 

LAST COIN / LAST MINUTE ALERT 

LC521-DC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) D/C TYPE (24VAC) USE WITH AT401D-L, $80.00 C 

AT402-L & AT403-L 

LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) A/C TYPE (24VAC) USE WITH AT411E-L, $80.00 C 

AT412-L, BT800B-H, BT802B-H, BT902-H, BT912, BT922 AND LTT802-H. 

LC525-AC LAST COIN ALERT SAME AS LC521-AC WITH NO PLUG IN HOUSING (24VAC) $41.67 C 

LC525-DC LAST COIN ALERT SAME AS LC521-DC WITH NO PLUG IN HOUSING (24VAC) $41.67 C 


LC525-AC 

LC521-AC 

BD200 COIN COUNTER OR HOUR METER 

Page 31

MODEL 

NUMBER 

DESCRIPTION 

ZOLAR 

THE ULTIMATE IN FREEZE CONTROLS 

LIST DISC. 

PRICE CODE 

Z440 ZOLAR IS THE ULTIMATE IN ANTIFREEZE CONTROL SYSTEMS. UP TO 4 DIFFERENT FIELD $553.77 B 

PROGRAMMABLE 3AMP RELAY OUTPUTS WHICH CAN SWITCH OUT DIFFERENT VOLTAGES – 24VAC, 

115VAC OR 220VAC TO CONTROL DEVICES LIKE N/O OR N/C VALVES, LIGHT CONTACTORS, FLOOR 

HEATERS, TURN OFF AUTOMATIC. TURN ON EQUIPMENT ROOM HEATER OR AIR CONDITIONER. 

VALVES CAN BE SET FOR STEADY ON AND/OR CYCLING. AUTO DIALER OUTPUT CAN BE SET IF AN 

ALARM CONDITION OCCURS OR IF THERE IS A POWER FAILURE. FIELD PROGRAMMABLE VIA 4 

SIMPLE BUTTONS OR RC800HAND HELD REMOTE. DIGITAL DISPLAY WILL SHOW CURRENT 

TEMPERATURE, DAYS POWERED, DAYS BELOW FREEZING AND MORE, THERE ARE 6 STATUS 

INDICATOR LED, ZOLAR ALSO CAN CONTROL UP TO 10-LOW PRESSURE / FOAM BLOWER MODULE 

(Z-FB880) TO KEEP YOU BRUSHES AND/OR TRI COLOR FOAMING PRODUCTS FROM FREEZING. 

STANDARD 1 50’ TEMPERATURE SENSOR AND UP TO 3 ADDITIONAL TEMPERATURE SENSOR AND 

OR AMBIENT LIGHT PROBES (Z-440LP) SIZE – 10”W x 7”H x 3”D 

Z-FB880 FOAM BLOWER MODULE Z-FB880 IS FIELD PROGRAMMABLE TO BLOW OUT UP TO 8 SEPARATE $176.92 B 

VALVES EACH AFTER A SIGNAL IS RECEIVED FROM ZOLAR. FOAM BLOWER WILL NOW WAIT UNTIL 

ONE OF THE INPUTS IS ACTIVATED FOR 10 SECONDS, WHICH WILL ARM THE UNIT. ONCE POWER 

HAS BEEN REMOVED THE UNIT WILL WAIT 10 SECONDS TO SEE IF POWER IS REAPPLIED BEFORE 

STARTING THE BLOW DOWN CYCLE FOR THAT ONE INPUT. SIZE 

ACCESSORIES FOR ZOLAR 

Z440LP-50 AMBIENT LIGHT SENSOR TO CONTROL OUT SIDE OR INSIDE LIGHTS WITH 50’ CABLE $39.67 B 

Z440TP-50 TABLATURE SENSOR PROBE WITH 50’ SHIELDED CABLE $39.67 B 

Z-07S ISOLATE INPUTS FOR FOAM BLOWER $33.50 C 

BLOW DOWN TIMER 

AF411 BLOW DOWN TIMER FOR AUTOMATIC CAR WASH THAT CAN BE ACTIVATED BY TREADLE SWITCH, $200.10 C 

THERMOSTAT, OR TIMER IN SELF SERVICE BAYS. 

MODULES TO REPLACE BLADDER TANKS 

MX8 24VAC MULTIPLEXED CONTROL – 2 SEC ON & OFF DELAY. MONITOR 8 INPUTS FROM BAY LOCATION $109.95 C 

TO TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE 

MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT IS 24VAC 

OR 120VAC. 

MX9 24VAC MULTIPLEXED CONTROL – NO TIME DELAY. MONITOR 8 INPUTS FROM BAY LOCATION TO $109.95 C 

TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, 

PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT IS 24VAC OR 

120VAC. 

MX10 24 VAC MULTIPLEXED CONTROL – 1 SEC ON & OFF DELAY. MONITOR 8 INPUTS FROM BAY $109.95 C 

LOCATION TO TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT 

DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT 

POWER IS 24VAC OR 120VAC. 

Page 32

MODEL 

NUMBER 

DESCRIPTION 

MULTI FOAM BRUSH OR PROTECTANT MULTIPLEX CYCLER 

LIST DISC. 

PRICE CODE 

MX48 MULTIPLEX CONTROLLER WITH 8 INPUTS AND 4 OUTPUTS TO REPLACE THE COSTLY PLC’S AND / OR $375.00 D 

MULTI RELAY SETUPS USED FOR THE MULTICOLOR LOW PRESSURE WAX AND BRUSH SYSTEMS. 

MX48 HAS 1 CONSTANT OUTPUT AND 3 SEPARATE TIMED OUTPUTS CONTROLLED BY 1 SWITCH 

WITH 5mSec.OVER LAP. SAME FOOT PRINT AND ELECTRICAL SPECIFICATION AS THE MX8. WHEN 

MORE THAN 8 INPUTS ARE NEEDED, USE THE MX9 TO ADD UP TO 7 ADDITIONAL INPUTS. 

INLINE ON & OFF DELAYS 

MX1 THIS CONTROL ELIMINATES THE HIGH PRESSURE MOTOR STARTER FROM PICKING UP & DROPPING $58.34 C 

OUT AS SOMEONE TURNS THE ROTARY SWITCH FROM ONE TYPE OF SERVICE TO THE NEXT. (WITH 

1 SEC DELAY.) SAVES ON THE ELECTRIC BILLS, INCREASES PUMP AND CHECK VALVE LIFE. 

MX2 SAME AS MX1 WITH 2 SEC DELAY $58.34 C 

MX3 SAME AS MX1 WITH 2 SEC ON & .3 SEC OFF $58.34 C 

FUSES 

FC FUSE CLIP FOR FT30 $4.95 A 

MEN5 FUSE 5 AMP FOR TRA183 $4.14 A 

MEN15 FUSE 15 AMP 13/32” x 1-1/2” $5.37 A 

TRANSFORMERS 

TRA12VDC 12 VOLT DC 300MA POWER SUPPLY USEDE WITH WICKET NIGHT ACCESS $17.74 A 

TRA24-6 115VAC TO 24VAC: 40 VA OUTPUT TRANSFORMER $16.15 D 

TRA183 115/208/230 VOLT TO 24VAC: 100 VA TRANSFORMER, FUSED OUTPUT ENCAPSULATED FOR DAMP $50.55 D 

ENVIRONMENTS. 

TRA185 115/208/230 VOLT TO 24VAC: 150 VA TRANSFORMER, FUSED OUTPUT ENCAPSULATED FOR DAMP $c/f D 

ENVIRONMENTS. ***SPECIAL ORDER ONLY*** 

ELECTRICAL ACCESSORIES 

AC05 AMP METER “OBSOLETE” $37.40 D 

HM10 HOUR METER 24VAC $55.84 D 

DPDT RELAY (SPECIFY COIL VOLTAGE) $18.46 D 



CONTACT MODULE 

CP-CT CURRENT TRANSFORMER DRY CONTACT – FIELD ADJUSTABLE $66.67 A 

MA70 DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® TO INCREASE COIN PULSE SIGNAL $33.50 C 

MA70-S ISOLATE 2 DIFFERENT COIN PULSES FROM 2 BAYS OR VAC'S WHEN CONNECTED W/VAC UP SYSTEM $33.50 C 



MA71 DUAL DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® USED WITH 2 WIRE COIN COUNTERS $33.50 C 

MA72 QUAD DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® DUAL MA71 $67.00 C 

MA72-P RELAY OUTPUT MODULE FOR PS200 TO ADD 3 RD STACK OPTION ON ONE SERVICE $33.50 C 

MA73 DUAL DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® DUAL MA74 $67.00 C 

MA74 QUAD DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® USED TO ISOLATE DIFFERENT $33.50 C 

TYPES OF COIN SIGNALS OR POWER OUTPUTS 

MA75 OUTPUT MODULE FOR ACW TO CPU $277.79 C 

Page 33

MODEL 

NUMBER 

DESCRIPTION 

CONTACT MODULE 

LIST DISC. 

PRICE CODE 

MA76 LATCH TIME MODULE 24VAC USED TO DISABLE OR ENABLE LATCH TIMER MODELS BT912-T, $58.33 C 

LTT802-T, AND GT1200 WHEN USING GIGA TIMER OPTION 

MA76DCN/012 LATCH TIME MODULE 12VDC USED TO DISABLE OR ENABLE LATCH TIME $58.33 C 

MA76DCN/024 LATCH TIME MODULE 24VDC USED TO DISABLE OR ENABLE LATCH TIME $58.33 C 

MA77 COIN PULSE INTER FACE FROM A POWER( 24VAC) SOURCE TO A COMMON PULSE $33.50 C 

MA-VEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 


MA-VEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 


DEMOS AND TOOLS 

METER BOX DEMO 

SD101 METER BOX DEMO FOR DISPLAY ON DISTRIBUTOR COUNTER $1,895.85 B 

COMPLETE DEMO READY TO PLUG INTO 120VAC MB155 “BIG BOX”, DEC155, WITH LTT8-LUCKY, 

LC525-AC,X10, ASSORTED X-MARK”® TOKENS, PUSH BUTTON SWITCH FOR COIN PULSES, IRM800, & 

IR800 REMOTE. 

PS200 PermaSwitch PS200® 10 POSITION ELECTRONIC SWITCH $375.00 B 

LIGHTED FRAME DEMO 

SD100 MENU SIGN INSIDE OF LIGHTED FRAME FOR DISPLAY ON DISTRIBUTOR COUNTER. $1,383.20 B 

COMPLETE DEMO READY TO PLUG INTO 120VAC, WITH 10 POSITION ROTARY SWITCH, BT902-BHP 

BIG TIME, MS100-10 MENU WITH REMOTE, LAST COIN ALERT, & PUSH BUTTON TO SIMULATE COIN 

INPUT. 

JUMBO TIME DEMO 

SD102 JUMBO TIME TWOTIMER DEMO $1383.20 C 

BT922 COMPLETE WITH 120VAC TRANSFORMER, POWER CORD, IRM800 INFRARED RECEIVER, IR800 

REMOTE, 10 POTION ROTARY SWITCH, & PUSH BUTTON 

X-MARK® TOKEN AND “XEPTOR”® TESTER 

TESTERS AND TOOLS 

BT62 METAL HAND CRIMPING TOOL FOR COILED CORDS $27.27 A 

BT/LTT199-1 CABLE HOOKUP BETWEEN DISPLAY TIMERS AND LAPTOP OR COMPUTER $20.00 A 

CM45308 CABLE TO CONNECT IR800 REMOTE TO PC THAT WILL ALLOW YOU TO PROGRAM CLONE $9.92 C 

INFORMATION AND / OR SET WASH DOWN CYCLE CODE AND TIME. 


X10199-1 “XEPTOR”® CABLE HOOKUP BETWEEN RS232 PORT AND LAPTOP OR COMPUTER TO MONITOR $18.46 A 

AND / OR CHANGE CONFIGURATION OF “XEPTORS”® 

X1050-TS TEST STAND FOR MA800’S AND X10”S WITH 24VAC POWER SUPPLY DOES NOT INCLUDE XEPTOR $133.33 A 

Page 34

X-MARK® or SMART-MARK® METAL CODED TOKENS 

FOR MODEL X10 “XEPTORS® 

PRICING ON NORMALLY STOCKED SINGLE METAL X-MARK TOKENS 

SINGLE METAL STOCK X-Mark TOKENS 

Diameter 500 5,500 10,500 25,500 50,000+ 

0.900” .33 .31 .30 .28 C/F 

0.984” .39 .37 .35 .34 C/F 

1.073” .48 .46 .44 .41 C/F 

1.125” .52 .49 .47 .45 C/F 

BI-METAL STOCK X-Mark TOKENS 

Diameter 500 5,500 10,500 25,500 50,000+ 

0.984” .52 .49 .47 .45 C/F 

1.073” .55 .52 .50 .47 C/F 

Custom Tokens minim order per token -10,000, 25,000 or 50,000+ call for pricing 

** One time Die and Art work charge on all new custom token orders is $800.00. ** 

TERMS FOR CUSTOM- 50% DOWN PLUS $800.00 ART WORK & DIE CHARGES- 

BALANCE PRYOR TO SHIPPING 

Due to the volatility of the metal market, Custom Quoted Token pricing is only good for 30 days. 

STANDARD METAL CONTENT FOR CAR WASH & ARCADE TOKENS 

ALLOY NICKEL COPPER ZINC STOCK SIZE 

260 0 70% 30% X 0.900 & 1.073 / Nickel Plated 

240 0 80% 20% 

230 0 85% 15% 

752 18% 65% 17% X 0.986 / 1.073” 

TSA 1.9% 73.7% 24.4% X 0.986 / 1.073 / 1.125” 

TSA6 6% 70% 24% X 0.900 / 0.986 / 1.073” 

TSA6 6% 70% 24% X 0.986 & 1.073” x 0.080”** 

TSA9 9% 70% 21% X 0.1073” 

TSA & TSA6 - .080 THICKNESS X 0.0986 / 1.073 & PLATED BRASS 0.900 & 1.073 HAVE REEDED EDGE”** 

BI- METAL TSA / EDGE METAL – 752 / CENTER METAL X 0.984 / 1.073” 

The advanced technology of the IDX X10 series of Xeptors and the X-Mark or Smart-Mark site-specific tokens is the only token 

system that eliminates cross play (acceptance of other companies, or competitors tokens) in the car wash industry. This is 

achieved because of IDX’S patented technology and only IDX can guarantee that we will never sell a duplicate dedicated token 

that has been assigned to you within 100 to 150 miles of your establishment. The X10 Xeptor is the only token acceptor that does 

not allow cross play when programmed with the assigned X-Mark or Smart-Mark site-specific token and rejects all other noncoded 

pieces of metal out there disguised as a token. IDX monitors the placement of each X-Mark & Smart-Mark site-specific 

token code for each company location and matches it with the correct model of X10 Xeptor. Other manufactures of coin 

acceptors and tokens cannot match this guarantee. 

TO ORDER X-MARK OR SMART-MARK CODED TOKENS **ORDER BY SIZE, METAL, & CODE SET** 

NEW CODES WILL BE ASSIGNED BY ZIP CODE TO AVOID DUPLICATION OF CODE IN SAME AREA 

**PLEASE HAVE NAME OF CAR WASH, CITY, STATE, & ZIP CODE WHEN ORDERING** 

Page 35

HOLOGRAM OR MYLAR FOIL IMAGES 

MOUNTED ON 

X-MARK OR SMART MARK CODED TOKENS 

The pricing break down is as follows for stock X-MARK OR SMART-MARK tokens with 15mm HOLOGRAM 

****SINGLE METAL PRICING**** 

QUANTITY PRICE EACH PRICE EACH PRICE EACH PRICE EACH DISC CODE 

Size 0.900 Size 0.984” Size 1.073 Size 1.125” 

100-300 $0.97 $1.03 $1.12 $1.19 A 

400-600 0.95 1.01 1.10 1.17 A 

700-1000 0.92 0.98 1.07 1.14 A 

1,100-2,000 0.90 0.96 1.05 1.12 A 

2,100-4,900 0.88 0.94 1.03 1.10 A 

5,000-10,000 0.84 0.91 0.99 1.06 A 

EACH TOKEN WILL HAVE THE X-MARK OR SMART-MARK CODE ON BOTH SIDES 0F THE TOKEN AND THE 

HOLOGRAM ONLY ON ONE SIDE 

THE HOLOGRAM X-MARK TOKEN SIZES: 15mm IMAGE ” 0.900”/ 0.986” / 1.073”/ 1.125” TOKEN 

The pricing break down is as follows for stock X-MARK tokens with 15mm MYLAR FOIL FLAG 

MOUNTED ON STOCK X-MARK OR SMART MARK TOKENS 

****SINGLE METAL PRICING**** 

QUANTITY PRICE EACH PRICE EACH PRICE EACH PRICE EACH DISC CODE 

Size 0.900 Size 0.984” Size 1.073 Size 1.125” 

100-300 $0.68 $0.74 $0.83 $0.90 A 

400-600 0.64 0.70 0.79 0.86 A 

700-1000 0.60 0.66 0.75 0.82 A 

1,100-2,000 0.57 0.63 0.72 0.79 A 

2,100-4,900 0.55 0.61 0.78 0.77 A 

5,000-10,000 0.53 0.59 0.70 0.75 A 

CUSTOM 1 COLOR 15mm MYLAR FOIL IMAGES FOR X-MARK OR SMART-MARK TOKENS 

$0.21 EACH AT 5,500 IMAGES ONLY 

CUSTOM 2 COLOR 15mm MYLAR FOIL IMAGES FOR X-MARK OR SMART-MARK TOKENS 

$0.29 EACH AT 5,500 IMAGES ONLY 

CONSULT IDX FOR LARGER QUANTITY PRICING 

CUSTOM 2 COLOR 15mm MYLAR FOIL IMAGES MINIMUM ORDER IS 5,500 PIECES ONE TIME 

CUSTOM ART-WORK & DIE CHARGE IS $350.00. MINIMUM REORDERS ARE 5,500 PIECES. 

DELIVERY ON CUSTOM MYLAR IMAGES AFTER APPROVED ARTWORK, EXPECT LEAD-TIMES TO 

BE 3 TO 4 WEEKS 

**TERMS FOR CUSTOM - 50% DOWN PLUS ART WORK & DIE CHARGES- 

BALANCE PRYOR TO SHIPPING** 

Page 36

When you try the others, 

Come To IDX ® and Use The Best. 

X10 MA800 GEMINI TWIN II 

LITTLE TWO TIMER 

BIG TIME 

ZOLAR FOAM BLOWER AT411E 

JUMBO TIME 

Lucky Time 

PERMA SWITCH 

GigaTime 

“CARD-DISPLAY protocol” 

MX8 MX1 

MX48 FOAM-I-NATOR 

X-MARK® 

XEPTOR® 

WicketID 

Wicket Jackpot Display 

Page 37

SPRING 2009 - IDX Inc

Create successful ePaper yourself

Delete template?

Save as template?