USAFE: Safety - BITS
USAFE: Safety - BITS
USAFE: Safety - BITS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AFMAN91-221_<strong>USAFE</strong>SUP1_I 18 AUGUST 2005 29<br />
Table 6.1. Report Submission Schedule for Weapons, Explosives and Radiological Class A, B, C, D,<br />
and E Events.<br />
Reports required by this table are in addition to OPREP-3 reports required by AFMAN 10-206.<br />
If the<br />
mishap is a<br />
1 Class A or B<br />
mishaps<br />
then submit not later than By<br />
Preliminary message report (see<br />
note 1)<br />
within 8 hours.<br />
2 Status report (Figure A3.1.) within 10 days and as<br />
required afterward<br />
3 Final report (Figure A3.2) within 30 calendar days<br />
or 3 workdays following<br />
Formal Report<br />
Priority message (see<br />
note 2)<br />
Message format (see<br />
notes 3, 4)<br />
Message format<br />
4 Formal report (see notes 5, 6) within 30 calendar days AF Form 711-series<br />
5 Convening Authority briefing (if<br />
required)<br />
6 Class C Preliminary message report (see<br />
note 1)<br />
15 days after completing<br />
investigation<br />
Convening Authority<br />
direction<br />
72 hours Message format<br />
7 mishaps Status report (see note 3) as required<br />
8 Final report (see notes 5, 6) within 30 calendar days<br />
9 Formal report (when directed by within 30 calendar days AF Form 711-series<br />
MAJCOM or HQ USAF/SE)<br />
10 Class D<br />
mishaps and<br />
Class E<br />
events<br />
Final report (see notes 5, 6) within 30 calendar days Message format<br />
11 OT&E Preliminary message report within 24 hours Message format<br />
12 Status report every 30 days<br />
13 Final report (see notes 5, 6) Within 75 days<br />
14 Formal report (when directed by within 75 calendar days AF Form 711-series<br />
MAJCOM or HQ USAF/SE)<br />
NOTES:<br />
1. Use non-privileged, unclassified format for preliminary report (Figure A3.1.).<br />
2. Overseas commands use IMMEDIATE precedence.<br />
3. Use Figure A3.1. format for initial status report. Include new information discovered since<br />
the preliminary report and identify SIB members. Remember to place the safety privilege