FLOORING TECHNOLOGIES - Bostik

Application
The soundness of the substrates should be checked prior to flooring screed
applications. No application should be performed on the substrates that are not strong
enough to bear their own weight.
Swollen, flaked-off, loose substrates and old damaged layers should be removed from
the surface before applying the flooring screeds.
The substrate should be primed with a suitable primer in compliance with the
absorbency and porosity of the floor.
Bonding is excellent in the surfaces that are primed with right primer and the
consumption is reduced. The durability and performance of the flooring screed to be
applied on the top coat increase.
Before the application, the powder material is poured into a clean container filled with
clean water (please refer to mixing water ratio for flooring screeds) and slowly mixed
with a low-speed mixer until obtaining a lump-free mixture for minimum 5 minutes.
Flooring Technologies
10