LineLazer - Series - Grün GmbH

More documents

Recommendations

Info

Marking technology LineDriver and LineDriver – Air Hydrostatic driven, comfortable move forward and backwards via foot pedal, simply to couple like a passenger car trailer – this drive unit upgrades the LineLazer to a powerful sit-on marking machine. The compressor upgrade on the LineDriver – Air allows the use of a bead gun and because of the powerful alternator e.g. a skip-line control can be installed. Name LineDriver LineDriver HD LineDriver – Air with upgrade kit compressor Article-Number 80087300 80087301 80087320 HONDA gasoline 4.1 KW 4.83 KW 7.1 KW 4 – stroke engine Fuel tank 3.6 Liter 3.6 Liter 6.1 Liter Compressor output not applicable not applicable 340 Liter/min. Weight ca. 120 kg ca. 125 kg ca. 175 kg Width ca. 66 cm ca. 66 cm ca. 66 cm Height ca. 104 cm ca. 104 cm ca. 104 cm Length ca. 147 cm ca. 147 cm ca. 165 cm Not only LineLazer models can be moved with the LineDriver, also other hand-guided devices like road lane dryer, demarcate milling machines or crack milling machines resp. joint cutters are ideal to combine with the LineDriver. LineDriver with LineLazer 200 HS LineDriver with road lane dryer GST LineDriver with demarcate milling machine
Marking technology LineLazer 200 HS – Compressor Good retro reflection values are essential for line markings on public places. Therefore the LineLazer 200 HS – Compressor is equipped with a compressor which allows the use of a pneumatically controlled bead gun. Besides that is the machine a normal LineLazer – with all proven features and advantages! LineLazer HS 130 – 2K / LineLazer HS 200 – 2K Instead of the „open system“ with spray resin and coated beads which was so far used for the manual processing of 2-component cold spray plastic these devices now offer various practical applications. The two material components are sprayed „wet in wet“ with open mixing system 1:1. The application ranges from car parks (underground parking) via block markings up to repair jobs after renewal of the road surface. The powerful model HS 200 – 2K is suitable to apply wide lines up to 50 cm. Where previously complex technique had to be used this flexible device is now quickly on the spot. Name LineLazer 200 HS – Compressor LineLazer HS 130 – 2K LineLazer HS 200 – 2K Article-Number 80086207 / 80087600 80160000 80150000 HONDA gasoline 6.0 kW / 8.0 HP 3.6 kW / 4.8 HP 6.0 kW / 8.0 HP 4 – stroke engine Compressor output 340 Liter/min. not applicable not applicable Pump capacity max. 7.5 l/min. max. 6 l/min. max. 10 l/min. Dimensions ca. 205 x 70 x 102 cm ca. 180 x 90 x 105 cm ca. 180 x 90 x 105 cm (L x W x H) Weight ca. 150 kg ca. 225 kg ca. 260 kg
Page 1 and 2: Marking technology LineLazer - Seri
Page 3: Marking technology LineLazer 3400 L
Page 7 and 8: Marking technology FieldLazer - the

LineLazer - Series - Grün GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?