Prospekt - Grün GmbH

Road lane dryer WHT 27
Marking Technology
For drying and pre-heating of the road surface
The lane dryer WHT 27 is ideally suitable for lane drying before applying the marking.
A better adhesion of the marking material is achieved by warming up the road surface on cold
days. The lane dryer can also be used to remove thermoplastic and tape markings.
4-wheel chassis with solid rubber wheels, d = 250 mm in the rear and cast wheels in front
YANMAR diesel engine with electric starter and water protected control box with integrated
maintenance-free battery
toothed belt driven blowing unit
propane heated burning chamber
electronic ignition of propane gas - air - mixture
electronic control of ignition with optical indication via control lights
pressure regulator with hose-failure-protection
adjustment of drying head to both sides and outside the device frame possible

Marking Technology
Technical Data:
Road lane dryer WHT 27
Part-Number 950027000
engine power
blowing capacity
propane gas pressure
drying width
gas bottle holder
length
width
height
weight (without gas bottle)
5.1 kW / 7 HP
approx. 27,000 l/min.
1.5 bar
up to approx. 350 mm
suitable for one bottle 11 or 33 kg
approx. 1,700 mm
approx. 600 mm
approx. 1,600 mm
approx. 165 kg
GRÜN GmbH
Spezialmaschinenfabrik Straßenmarkierungsmaschinen
Siegener Str. 81-83 - D-57234 Wilnsdorf-Niederdielfen
Tel. +49(0)271/3988-0 – Fax: +49(0)271/3988-159
P.O.B. 21 03 - D-57228 Wilnsdorf-Niederdielfen
Internet-Address: www.marktec-gruen.com
E-mail: info@marktec-gruen.com update status 29.10.2008
technical modification reserved!
partial pictures with special equipment, which is not included in basic machine!