Model 1500 GEOS / WG4 - Grundmann
Model 1500 GEOS / WG4 - Grundmann
Model 1500 GEOS / WG4 - Grundmann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> <strong>1500</strong><br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
Strict specifications such as the level handle end that<br />
turns back toward the door and certain technical<br />
details for casting in the fire-resistant insert, narrow<br />
the creative options when designing fittings for<br />
commercial buildings. However Gottfried Palatin is a<br />
tinkerer and a master of his craft. A gentle convexity<br />
on the handle nestles the lever handle in the hand and<br />
the tapering silhouette clearly distinguishes the model<br />
from its colleagues in the classic round tube design.<br />
Design: G O TTFRIED PALATIN<br />
lever handle model 1554<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 1504HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 1554 Lever handle bearings for selection Standards<br />
8<br />
56<br />
136<br />
42<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according to ÖNORM B 3859<br />
or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short ot long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 1554/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
46 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 1554 F1-SAT<br />
with square backplate D55<br />
lever handle model 1554 F1-SAT<br />
with short backplate, angled D52<br />
lever handle model 1554 F1-SAT<br />
with short backplate, rounded D51<br />
lever handle model 1554 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) Window pull model 1504H, HA<br />
ø ø<br />
ø8<br />
38<br />
<strong>GEOS</strong>-Fittings<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
90<br />
75,5<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 47
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 1600<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
In spite of its strict functionality or perhaps<br />
because of this extremely reduced language<br />
of form the model has been well established in<br />
the market for many years. A simple round tube<br />
bent once in a simple swing, a form that does no<br />
more, and does not want to do anything more<br />
than perform its function; something for purists.<br />
Design: GRUNDMANN<br />
lever handle model 1654<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 1604HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 1654 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859<br />
or DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short ot long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 1654/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
48 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 1654 E-POL<br />
with square backplate D55<br />
lever handle model 1654 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 1654 E-POL<br />
with short backplate, rounded D51<br />
lever handle model 1654 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) Window pull model 1604H, HA<br />
ø ø<br />
ø8<br />
38<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
166<br />
23 60 60<br />
46<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
21,5 24<br />
90<br />
75,5<br />
<br />
<br />
126,5<br />
E<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
ø 8<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 49
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 1700<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
Our U-shaped round tube lever handle remains the<br />
bestseller among commercial building fittings. This<br />
has been part of our product catalogue since 1976,<br />
it quickly proved itself as a virtually ideal solution<br />
for large commercial buildings as it is robust, has<br />
a clear language of form, and it is secure. A classic<br />
example of the almost unnoticed but far-reaching<br />
design of everyday culture.<br />
Design: GRUNDMANN<br />
lever handle model 1754<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 1704HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 1754 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 1754/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
50 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 1754 MS<br />
with square backplate D55<br />
lever handle model 1754 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 1754 E-POL<br />
with short backplate, rounded D51<br />
lever handle model 1754 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) Window pull model 1704H, HA<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<br />
<br />
<br />
<br />
ø ø<br />
ø8<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
90<br />
75,5<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 51
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 2100<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
Inspired by the intense construction activity of<br />
our new State Capital St. Pölten, we commissioned<br />
Michael Schaefer to design a commercial<br />
building fitting. He presented a design where<br />
the basic idea is characterized by a round neck<br />
resting within itself that transitions to a flat<br />
sympathetic handle with an end that has been<br />
pressed into an oval. This gives the lever handle<br />
a tapering dynamic swing to the door.<br />
Design: SCHAEFER-DESIGN<br />
lever handle model 2154<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 2104HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2154 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 2154/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
52 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2154 E-POL<br />
with square backplate D55<br />
lever handle model 2154 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 2154 E-POL<br />
with short backplate, rounded D51<br />
lever handle model 2154 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) ) Window pull model 2104H, HA<br />
ø ø<br />
ø8<br />
38<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
90<br />
75,5<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 53
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 2200<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
A high oval lever handle that tapers slightly –<br />
this is a simple description of the <strong>Model</strong> 2200.<br />
This discretely elegant design makes the <strong>Model</strong><br />
2200 a secret tip in the <strong>GEOS</strong> product line and<br />
it is particularly interesting for restoration of old<br />
buildings. Thus for example it can be effectively<br />
combined with the <strong>Model</strong> 600, an Early Modern<br />
apartment building classic.<br />
Design: GRUNDMANN<br />
lever handle model 2254<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 2204HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2254 Lever handle bearings for selection Standards<br />
60 8<br />
11<br />
136<br />
42<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 2254/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
54 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2254 F1-SAT<br />
with square backplate D55<br />
lever handle model 2254 F1-SAT<br />
with short backplate, angled D52<br />
lever handle model 2254 F1-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2254 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) Window pull model 2204H, HA<br />
ø ø<br />
ø8<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
65<br />
43<br />
31<br />
7<br />
ø10<br />
3<br />
35 12<br />
73<br />
11<br />
136<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
42<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
90<br />
75,5<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 55
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 2300<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
We added this model to our product line in the<br />
early seventies at the suggestion of a Swiss<br />
customer. Because the Swiss Railways used<br />
a very similar model, it became known as the<br />
“Swiss Railways door lever”. The form became<br />
famous through a concept by the architect Max<br />
Bill, who further developed this design for the<br />
Ulm College of Art.<br />
Design:<br />
GRUNDMANN<br />
(based on a concept for the<br />
Swiss Railway)<br />
lever handle model 2354<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 2304HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2354 Lever handle bearings for selection Standards<br />
8<br />
62<br />
ø 21<br />
133<br />
44<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 2354/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
56 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2354 F1-SAT<br />
with square backplate D55<br />
lever handle model 2354 F1-SAT<br />
with short backplate, angled D52<br />
lever handle model 2354 F1-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2354 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) Window pull model 2304H, HA<br />
ø ø<br />
ø8<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
65<br />
43<br />
31<br />
7<br />
ø 10<br />
3<br />
35<br />
75<br />
ø21<br />
133<br />
38<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105.5 21 31.5<br />
90<br />
75,5<br />
E 41<br />
178<br />
105.5 21<br />
<br />
<br />
189<br />
E 50<br />
105.5 21<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
112<br />
DIN 72<br />
21.5<br />
Backplates – fire retardant according to DIN 18273FS<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
<br />
<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
ø 8<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 57
Fittings for Commercial and<br />
Public Sectorse<br />
<strong>Model</strong> 2500<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
Stylistically this model that is distributed<br />
throughout the industry can be considered as<br />
«Early Modern». Thus it is the most modern of the<br />
classic lever handles. Since this form is shaped<br />
with such purity special value must be placed on<br />
execution of the details. Particular value is placed<br />
on a precise weld seam in the mitre and a cleanly<br />
worked lever handle end. And because the provisions<br />
for escape doors sensibly require a handle<br />
end that is bent back to the door, we have added<br />
the model 2500N to its side.<br />
Design: GRUNDMANN<br />
lever handle model 2554<br />
with roses D6 E-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 2504HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
window fitting model 1626HA<br />
(E-SAT only)<br />
with 90° latch<br />
prices see page 243<br />
Technical details<br />
Lever handle model 2554 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 2554/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
58 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2554 E-SAT<br />
with square backplate D55<br />
lever handle model 2554 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 2554 E-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2554 E-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm)<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>WG4</strong> roses (50 mm ø, rose height 7 mm)<br />
Window pull model 2504H, HA<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Window fittings model 1626H, HA<br />
<br />
<br />
<br />
ø ø<br />
ø8<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
<br />
<br />
<br />
<br />
<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
90<br />
75,5<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 59
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 2500N<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
This model is a sensible extension to the <strong>Model</strong><br />
2500, as it can also be proposed in accordance<br />
with the new EN standards for escape doors.<br />
However fans of mitre joint welded stainless<br />
steel parts could also go into raptures at the sight<br />
of this technically pure solution.<br />
Design: GRUNDMANN<br />
lever handle model 2554N<br />
with roses D6 F1-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
<strong>WG4</strong> prices see page 246<br />
window pull 2504NHA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2554N Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<strong>WG4</strong>-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 2554N/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
60 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2554N E-SAT<br />
with square backplate D55<br />
lever handle model 2554N E-SAT<br />
with short backplate, angled D52<br />
lever handle model 2554N E-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2554N E-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
<strong>GEOS</strong> roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) <strong>WG4</strong> roses (50 mm ø, rose height 7 mm) Window pull model 2504NH, HA<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<br />
<br />
<br />
<br />
ø ø<br />
ø8<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
189<br />
E 50<br />
105 21.5<br />
126,5<br />
E<br />
245<br />
21,5 24<br />
90<br />
75,5<br />
<br />
<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 61
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 4600<br />
<strong>GEOS</strong><br />
The new model «4600 <strong>GEOS</strong>» makes a very confident<br />
appearance. With large volume in vertical<br />
design, and exclusively in the best execution<br />
- stainless steel and ball bearings. It is designed<br />
for those buildings that are subjected to real continuous<br />
stress, such as hospitals and schools.<br />
For these types of applications there is no use<br />
starting with compromises.<br />
Design: GRUNDMANN<br />
lever handle model 4654<br />
with roses D6 E-SAT<br />
<strong>GEOS</strong> prices see page 214<br />
Technical details<br />
Lever handle model 4654 Lever handle bearings for selection Standards<br />
8<br />
63<br />
21<br />
50<br />
<strong>GEOS</strong>-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
<br />
<br />
141<br />
Suited for emergency exit doors<br />
according to EN 179<br />
<br />
Standard-Finish<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. <strong>GEOS</strong> 4654/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
62 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 4654 E-SAT<br />
with square backplate D55<br />
lever handle model 4654 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 4654 E-SAT<br />
with short backplate, rounded D51<br />
lever handle model 4654 E-SAT<br />
with long backplate, rounded D53<br />
Technical detailsails<br />
D6 roses (50 mm ø, rose height 8 mm)<br />
38<br />
<strong>GEOS</strong>-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
50<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
50<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
38<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
175<br />
E 41<br />
105 21.5 31.5<br />
24<br />
178<br />
E 41<br />
105 21.5<br />
189<br />
E 50<br />
105 21.5<br />
126,5<br />
E<br />
245<br />
21,5 24<br />
90<br />
75,5<br />
<br />
<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
112<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN 1125 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
112 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273<br />
ø 8<br />
<strong>GEOS</strong> backplate height: 8 mm<br />
<strong>WG4</strong> backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors<br />
63
Fittings for Commercial and<br />
Public Sectors<br />
<strong>Model</strong> 17300<br />
<strong>GEOS</strong> 17<br />
Aficionados among the fittings fanciers appreciate<br />
the L-shaped classic with a somewhat<br />
thinner round pipe. A mere 17 mm diameter<br />
bestows more subtlety and finesse. Anyhow one<br />
takes it not just for its pure beauty.<br />
Design: GRUNDMANN<br />
lever handle model<br />
17354/17K/55Z E-SAT<br />
prices see page 236<br />
Technical details<br />
Lever handle model 17354 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
ball bearing (K)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
<br />
Standard-Finish<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
for flush door leaves made of wood<br />
<strong>GEOS</strong>-lever handle sets (or entrance sets) with round<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. z.B. <strong>GEOS</strong> 17354/17K/55Z<br />
E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
64 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
window pull<br />
model 17304V E-SAT<br />
prices see page 243<br />
ball knob<br />
model 3154c/17148 E-SAT<br />
WC-thumb turn<br />
model 17184G E-SAT<br />
WC red/white-display<br />
model 17186 E-SAT<br />
Technical details<br />
Roses 17K (height: 6 mm, fire retardant rose: 8 mm) WC-thumb turn 17184G Ball knob 3154c Window pull 17304V (rose-height: 5 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<strong>GEOS</strong>-Beschläge<br />
<br />
Entfernung E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
<br />
<br />
<br />
<br />
<br />
BB 90 72 78<br />
PZ 88 88 72 92 72 78 78<br />
RZ 90 90 74 74 78 78<br />
<br />
WC (WC-Stift) 90/7 78/8* 78/8*<br />
Drückerstift 8,5 8,5 8 10** 9 8 9<br />
*) mit Ausgleichshülse 7/8 Vkt., **) mit Ausgleichshülse 8/10 Vkt.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 65
Fittings for Commercial and<br />
Public Sectors<br />
Knobs<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
In the Anglo-Saxon area the knob plays a much<br />
more prominent role than it does with us for<br />
opening and closing doors. We prefer the<br />
<strong>GEOS</strong><br />
knob 3154a/648AFH F1-SAT<br />
schaefer-design<br />
prices see page 239<br />
handle lever, which ergonomically is much more<br />
sophisticated. But these small spherical door<br />
openers are pretty and consequently we have<br />
consistently studied this theme. By the way our<br />
knobs can be ordered in designs that turn. With<br />
a turning doorknob it’s OK if you forget your key<br />
on occasion.<br />
Design: GRUNDMANN,<br />
SCHAEFER-DESIGN<br />
<strong>GEOS</strong><br />
knob 3054/648AFH F1-SAT<br />
design by <strong>Grundmann</strong><br />
prices see page 239<br />
<strong>WG4</strong><br />
knob 3254L F1-SAT<br />
design by <strong>Grundmann</strong><br />
(<strong>WG4</strong> only)<br />
Technical details<br />
Knob model 3054 3154a 3254L (<strong>WG4</strong> only)<br />
prices see page 269<br />
<br />
<br />
ø23<br />
<br />
<br />
<br />
39<br />
16<br />
ø49<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Advices and patterns of finishes see «Explanations»,<br />
necessary ordering information see price-chapter.<br />
66 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
Fittings for Commercial and<br />
Public Sectors<br />
WC-details<br />
<strong>GEOS</strong> / <strong>WG4</strong><br />
<strong>GEOS</strong><br />
<strong>WG4</strong><br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
You surely know the following situation: You are<br />
in a public place, standing indecisively in front<br />
of a toilet door, thinking whether the longed for<br />
«quiet little place» is occupied or not. WC roses<br />
and WC plates from <strong>Grundmann</strong> are all equipped<br />
with a red/white display. And we will continue<br />
with this discrete detail in the future as well.<br />
Design: GRUNDMANN<br />
<strong>GEOS</strong><br />
WC-rose with red/white-display<br />
prices see page 239<br />
<strong>WG4</strong><br />
WC-rose with red/white-display<br />
prices see page 269<br />
<strong>GEOS</strong> and <strong>WG4</strong><br />
WC-rose with thumb turn<br />
prices see page 239 and 269<br />
Technical details<br />
<strong>GEOS</strong> model 684GA (with thumb turn) and 686T (with red/white-display)<br />
<strong>WG4</strong> model 7084GA (with thumb turn) and 7086T (with red/white-display)<br />
ø51<br />
ø50<br />
8<br />
5<br />
19<br />
7<br />
ø8<br />
ø8<br />
15<br />
ø7<br />
ø7<br />
38<br />
5<br />
38<br />
<strong>GEOS</strong>-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<strong>WG4</strong>-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 67