Industry Guidelines for the Numbering and Bar ... - GS1 Australia

More documents

Recommendations

Info

If the unit is already marked with an EAN-13, UPC-A, ITF-14 or GS1-128 Bar Code Symbol for trade item identification purposes, the label should be placed so as not to obscure the pre-existing bar code symbol. The preferred location of the label in this case is to the side of the pre-existing bar code symbol, so that a consistent horizontal location is maintained. 6.3.1.2 Pallets Less than 1 metre in Height For pallets less than 1 metre in height, the logistics label should be placed as high as possible but not more than 800mm from the base of the unit. 6.3.1.3 Pallets and Other Units Greater than 1 metre in Height For pallets and other units greater than 1 metre in height, labels should be placed so that all the bar code symbols are at a height between 400mm and 800mm from the surface on which the pallet stands and no closer than 50mm from the vertical edge. Diagram 18: Location of the GS1 Logistics Label on pallets h < 800 mm h > 400 mm x x> 50 mm x The Australian Liquor Industry Guidelines Version 3.4 Draft © GS1 Australia – January 2009
7 Industry Sector Scenarios 7.1 Introduction The GS1 System prides itself on having a complete set of recommendations and requirements to ensure that all parties throughout the supply chain are aided and not hindered by the implementation of its system. The Australian Liquor Industry guidelines have been written to provide a snapshot view of the GS1 System. Used in conjunction with the GS1 Australia User Manual - Numbering and Bar Coding and assistance from GS1 Australia they have been designed to identify the key components of the system and enable suppliers within the industry to begin implementation throughout their business. The following section of the Australian Liquor Industry guidelines focuses on providing examples of trade items that exist within the industry and the methods of allocating Global Trade Item Numbers (GTINs). It is not feasible to include every possible variation of trade item available in such a document. It is up to suppliers to identify their own products and the associated method by which to allocate a GTIN and the respective bar code symbol type applicable. Input into this section of the Australian Liquor Industry Guidelines has been provided by the Australian Liquor Industry Working Group. 7.2 Australian Liquor Industry Requirements This is a practical guideline for companies who are intending to implement the numbering and bar coding of trade items. Table 1: Implementation Table GTIN required for POS items Required on Individual trade items GTIN required for trade items not sold at POS Required on trade items not sold at the point of sale where appropriate Attribute data identified at Industry Level Additional information may be required based on trading partner relationships SSCC* Will be required by most retailers for scan receipting Global Location Number Will be required once messaging standards implemented *When combined with eMessaging the SSCC (Serial Shipping Container Code) improves efficiency throughout the supply chain. In the event where eMessaging has not yet been fully The Australian Liquor Industry Guidelines Version 3.4 Draft © GS1 Australia – January 2009
Page 1 and 2: Industry Guidelines for the Numberi
Page 3 and 4: Acknowledgements This Numbering and
Page 5 and 6: 6.2.1 Shallow Trays................
Page 7 and 8: 1.2 The GS1 System GS1 identificati
Page 9 and 10: 2 Executive Summary As the Liquor I
Page 11 and 12: 4 Components of the GS1 Standards 4
Page 13 and 14: 4.2.1 Global Trade Item Number (GTI
Page 15 and 16: 4.2.3 Serial Shipping Container Cod
Page 17 and 18: 4.3 The Data Carriers - Bar Code Sy
Page 19 and 20: Diagram 7: GTIN and Bar Code Symbol
Page 21 and 22: 5 How to Number and Bar Code Trade
Page 23 and 24: • Reducing the magnification (siz
Page 25 and 26: 5.2 Trade Items NOT Sold at Retail
Page 27 and 28: 5.2.3 Allocating a GTIN-12 with Two
Page 29 and 30: 5.2.5 Allocating a GTIN-14 from a G
Page 31 and 32: Figure 16: Variable measure trade i
Page 33 and 34: 5.5 How to Allocate the Serial Ship
Page 35 and 36: 5.6.1 Components of the GS1 Logisti
Page 37 and 38: 5.6.4.2 Bar Code Symbol Orientation
Page 39 and 40: 6.1.2.3 Multipacks Single trade ite
Page 41: 6.3 Logistic Units For cartons and
Page 45 and 46: 7.4 GTIN Options for the Australian
Page 47 and 48: As described in Section 5.3 trade i
Page 49 and 50: The format of the GIAI: GS1 Company
Page 51 and 52: 7.7 GS1 Logistics Label Formats for
Page 53 and 54: Diagram 22: Example of the GS1 Logi
Page 55 and 56: Diagram 24: Example of a GS1 Logist
Page 57 and 58: 8.2 Global Location Numbers (GLN) 8
Page 59 and 60: 8.3.3 GS1 Data Matrix GS1 Data Matr
Page 61: 8.4.2.3 Accreditation GS1 Australia

Industry Guidelines for the Numbering and Bar ... - GS1 Australia

Create successful ePaper yourself

Delete template?

Save as template?