Fuel - Tools.by

CONNECTION N A PIPE TO THE CHIMNEY OF THE HEATER
• minimum length of the pipe before bending is 1 meter
• never bend more than 45°, , a bending can be made several times
• when the pipe is through the wall there should be before and after the bend a
straight segment of at least 1 meter
• a cap against rain and wind needs to be
on top of the pipe
• there is no maximum length when the pipe
is going straight up
ALWAYS CONNECT PIPE
ON THE ORIGINAL
HEATER CHIMNEY!
ul. Magazynowa 5A, 62-023 GĄDKI, tel. +48 (0) 61 654 40 00, fax. +48 (0) 61 654 40 01, www.desapoland.pl, e-mail: office@desapoland.pl