FIRE - Hapero

Smart design meets -
efficient power
Size doesn’t tell you much about “intrinsic values”. Take HAPERO, they managed to install trend-setting
technique in the smallest possible space. Or take their electronic control system where HAPERO
are not resorting to some over-the counter product, but setting themselves the future standards of
pellet-stove generations.
Come in - and find out all about HAPERO!
Touch - Screen, Remote maintenance (Internet), data recording (USB), GSM - module
Automatic chimney closure between burning cycles
High no-load losses between burning cycles
Plug & Fire certification for quick and easy installation
Automatic cleaning of heat-exchanger pipes
Automatic burner bowl cleaning
Ready to be connected to an external air-supply system
Ready to be connected to an external control unit (both by wire or wireless)
Time-consuming and expensive instruction necessary
Automatic pellet supply up to 20m
Manually refillable
Automatic air-flow regulation by air-quantity sensor
REAF-MANAGEMENT: (radiation energy and air flow-management)
Control system to manage burning process in accordance with air supply and radiation
Ash compactation (15 kW), (automatic) ash removal (system) (25 kW / 35 kW)
Integrated return-flow booster
Return-temperature controller required
Intelligent boiler managment
Intelligent (heating) management of up to 3 heater circuits
Intelligent hot water storage management for up to three different hot water storage types
Solar buffer management with calorimeter; eligible for subsidies in some countries
Ready to be activated by external control unit (dry contact possible)
Can be controlled by an external control unit (0 – 10 Volt)
YES
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
NO
P
P
P
PLUG & EASY control (unit)
Economical to purchase
and assemble
Until now - the installation of a new heating system has always been associated with high costs.
HAPERO can provide you with the right solution at the right price.
HAPERO’s unique heating-circuit control system with motor mixers, Plug & Easy is the option of
choice for new and old buildings. By means of a wireless room thermostat (which is attached to the
pellet boiler) the heating circuit pump is controlled so that correct room temperature can always
be maintained. In the case of renovation and after the replacement of an old boiler the existing
heating-circuit pump and water pump can be reused. By regulating the pump additional power
is saved.
Stay ahead with HAPEROs innovative control systems
Scheme without safety devices
Due to its small size, the HAPERO pellet boiler fits in every heating room. After
connecting the heating circuit pump and inserted the batteries into the wirelessremote
control, the boiler can be started immediately. Just forget about timeconsuming
installation and adjustments!
All functions apply to the basement as well as living-room model.
The whole heating system can
be turned on or off by wireless
remote control. You can choose
between two-time modes and set
the desired room temperature.
The integrated microprocessor
controller communicates wirelessly
with thermostat and individually
controls the desired room
temperature for up to three radiators.
Thanks to Plug & Easy this
control method does not require
any settings to be performed by
operator. Not to mention the provision
of hot water, management
of circulation pump, buffer management
in connection with solar
is controlled by microprocessor.
2 HAPERO BALANCE 3