kwb Katalog 2008-09 ENG

Masonry and hammer drills
Qualities
SDS max. Hammer Drills
Heavy Duty Hammer Drill, SDS max shank Ø 18 mm,
for hammer drills (5 kg and more), diameter to 40 mm,
Ø 12 - 15 mm with 2 cutting edges, Ø 16 - 40 mm with 4 cutting edges,
smooth and vibration reduced drilling up to 70%,
less danger of drill breakage when hitting steel reinforcement.
Pages 43 – 44
HB 44 SDS Plus Hammer Drills
Heavy Duty Hammer Drill, SDS plus shank Ø 10 mm,
for drilling machines SDS PLUS or Hilti TE,
shank quadruple flutes for optimum swarf removal, even with long drills,
minimal friction, special split point carbide tip, extra hard and tough,
specially ground for maximum drilling performance.
SDS
plus
Pages 45 – 48
SUPER ROCKER Masonry Drills for concrete and bricks
Suitable for pneumatic hammer drills, special carbide tip, diamond ground,
high temperature welded, hardened steel body, optimal u-form spiral.
Extra long life in concrete and granite;
up to 30% faster drilling.
Pages 49 – 50
ROCKER Masonry Drills for concrete and bricks
Round shank type 044, hexagon shank type 050, special 130° carbide tip,
high temperature welded, suitable for pneumatic hammers, asymmetrical.
Optimal life in concrete and masonry with excellent swarf clearance.
Pages 51 – 53
EASY CUT Multi Purpose Drills
118° diamond ground carbide tip, with specially ground edges, milled u-form spiral,
ground flutes. For universal use in tiles, bricks, plastic, aluminium, structural steel,
wood, engineering bricks, blocks, glass.
Page 54
Ceramic Drills
Diamond ground tungsten-titanium tip specially ground (to be self-sharpening), dry
drilling up to hardness 9 for ceramics, tiles, stone, vitrified ceramics
Page 55
039 Masonry Drills for bricks and concrete
130° carbide tip, roll forged spiral with half-round profile. For bricks,
engineering bricks, blocks, concrete. Also available in 200-, 400- and 600 mm
lengths as Profi Masonry Drill.
Page 56
41