Download Brochure - Hilco Industrial

Hilco induSTRiAl online AucTion
By order of
This auction will be conducted on Hilco’s all-new online auction platform
HilcoBid.net features:
• Advanced technology for the best online auction bidding experience.
• An online auditorium allows bidders to view up to 15 lots at once.
• Real-time updates and indicators to highlight new bids placed,
lots closing and time extensions.
• Simple interface and clean look. The new standard for online auctions.
Visit at www.hilcobid.net

By order of
coMPleTe PlASTicS coMPoundinG lineS
online Bidding Starts
Thursday, March 24th at 10am PT
online Bidding ends
Thursday, March 31st
Please visit www.hilcobid.net for closing times
Preview & locations
Wednesday, March 23rd
8am to 4pm local Time
Preview location 1:
5901 South 226 St. • Kent, WA 98032
Preview location 2:
7028 204th St. • Kent, WA 98032
For earlier inspection, please contact
Ken Planet at 248.254.9999 x33 or
Email kplanet@hilcoind.com
Further information
• A buyers premium of 18% for all sales is in effect with
a 3% discount for paying with cash, certified funds or
wire transfer. Auction will be conducted online in
english, accepting u.S. currency only.
• The removal deadline is Friday, April 15th with hours of
removal between 8am to 4pm monday thru friday. After
the noted deadline at 4pm, the buyer will incur a cost of
$500 for entry into the facility.
• For further information on machinery & equipment,
please contact Ken Planet at 248.254.9999 x33 or
email kplanet@hilcoind.com
• For payments please contact lesia Joseph at
616.732.1800 x19 or email ljoseph@hilcoind.com or
Hilco Accounts Receiveable at hin_ar@hilcoind.com
• customer Service, please contact Sandi neely at
248.254.9999 x16 or email sneely@hilcoind.com
• For auction registration questions, please contact Walter
Grant at 847.313.4754 or email wgrant@hilcoind.com
THERMOPLASTIC ELASTOMER /
STYRENE ETHYLENE BUTYLENE
STRYENE (SEBS) PRODUCTION LINE
1 – CompleTe line new in 2006 - IMCS Model 20-5033-00
Hydra Dump Loader; REIMELT/HENSCHEL TYPE FM500
Double Jacket Fluidizing Mixer, S/N 81 0500 009, Capacity 500
Liter, Weg 175 HP Motor, Bottom Scraper & Fluidizing Rod;
Discharge Hopper; MARTIN SCREW Horizontal & Vertical Auger
Material Conveyors; Dual BRABENDER Model DDW-FW PLUS
Gravimetric Feeders; MARIS Model TM 70 MP 12 Zone Extruder,
S/N 010506, External Screw 70 mm Dia, Speed 900 RPM, L/D
Ratio 44, Motor 270 kw, DeGass Pump 6.2 kw, Maris Gear Box,
Side Feeder Possible (Not Equipped), Maris Control Panel;
GALA SYSTEM #6 MAP Underwater Pelletizer; XALOY Model
EH-45 Hydraulic Screen Changer; Water Box & Cutter Head,
Model BFMOT Centrifugal Dryer w/Screens, GALA Control
Panel; KASON Classifier (Location K2)
1 – mARiS moDel Tm 30 mp CompoUnDinG eXTRUDeR, S/N 020206 (2006), 8 Zone, External Screw Diameter 30 mm,
Screw Revolution 1178 RPM, Siemens Main Motor 30 kw, L/D Ratio 46, Side Feed: Screw Diameter 30 mm, RPM 40-400,
Maris Gear Box #TM30MP020206; Xantech E-200 Display Screen; SCHENK ACCU-RATE Metering Monitor; GALA Model
LPU Laboratory Pelletizing System; SELLA Model -/40R/NM Temperature Controller, P/N XCN1004MI11 (Location K2)
This auction will be conducted
on Hilco's new online auction
platform, HilcoBid.net
2
HilcoBid.net features cutting-edge technology to provide
the best online auction bidding experience available.
Our Online Auditorium allows bidders to view up to
15 lots at once with real-time updates and indicators to
highlight new bids placed, lots closing and time extensions.
Similar lots are sychronized, so if you're outbid on a
particular lot, time will extend on all like items to give
you a chance to bid on a similar item.
With a simple interface and a clean look, HilcoBid is the
new standard for online auctions.
Visit at www.hilcobid.net,
create an account* and
register for an auction today.
*Please note: Previously registered Hilco Industrial Online buyers
will need to create a new account at HilcoBid.net. Bidders
may reuse previous username if it meets the site requirements.
Contact and credit card information will be required.
INjECTION MOLDINg MACHINES
4 – CinCinnATi milACRon moDel VT440-68 440 Ton x 68 oZ SHoT ToGGle ClAmp HoRiZonTAl inJeCTion
molDinG mACHineS, S/Ns T39A0300027, T39A0300032, T39A0300012 & T39A0300003 (To 2000), Camac
Control, Max Daylight 53.15", Mold Height Max 27.56" / Min 9.84", Clamp Stroke 25.6", Between Tie Bars 28.9" x 28.9",
Platens 39.4" x 39.4", 8.3-Ton Hydraulic Ejector, Stroke 5.83 (Locations K1)
2 – FeRRomATiK milACRon moDel mT225 22 225 Ton x 22 oZ SHoT ToGGle ClAmp HoRiZonTAl Two SHoT
inJeCTion molDinG mACHineS, S/Ns T84A0100086 & T84A0100070 (BoTH 2003), Xtreem ST Control, Core Pull, Screw,
Max Mold Height Open 674 mm, Press Stroke 410 mm, Max Mold Height Closed 264 mm, Clearance Between Tie Bars 22.4",
Vertical Injection Cylinder 7.6 Oz Shot, Caco Pacific Corp Model MRP750 Mold Rotating Plate, Moog Drive (Location K1)
1 – FeRRomATiK milACRon moDel K140-S/2F 140 Ton HoRiZonTAl Two SHoT inJeCTion molDinG mACHine
(imm 8), S/N 531 100 (1998), Between Tie Bars 19.5" x 19.5", Platens 29.5" x 29.5", Caco Pacific Model MRP750 Mold
Rotating Plate (Location K1)
1 – FeRRomATiK milACRon moDel ViSTA V55 55 Ton x 4.44 oZ SHoT ToGGle ClAmp HoRiZonTAl
inJeCTion molDinG mACHine, S/N S55A0500091 (2003), Hours 6,051; Xtreem ST Control, Clamp Stroke 11.02",
Daylight 24.8" Max, Mold Height Max 13.78 / Min 5.91", Platens 20.08" x 19.67", Clearance Between Posts 12.8" x 12.2",
Hydraulic Ejector; Maguire Model WSB-MB Weigh Scale Blender, S/N 89105; Maguire Microblender (Location K2)
1 – ARBURG moDel CenTeX 320C 500-170 55 Ton x 77 GRAm (85 cu. cm) SHoT HoRiZonTAl inJeCTion molDinG
mACHine, S/N 200970 (2006), Selogica Touch Screen Control, Clamp Force 500 Kn (50 Ton), Close Force 35 Kn (3.5 Ton),
Open Force/Increment 25/130 Kn, Open Stroke 350 mm, Mold Ht 200 mm Max, Clearance Between Tie Bars 320 mm x 320 mm,
Mould Platen 446 mm x 446 mm, Ejector Force 30 Kn / Stroke 125 mm; Arburg Injection Unit 170, Material Hopper (Location K-
2)
To schedule an auction, please call HilcoBid at 1-855-HilcoBid (44526243)

inJecTion MoldeRS • cHilleRS • TeMPeRATuRe conTRolleRS
MATERIAL STORAgE
& gRANULATOR
1 – imS moDel 111878 CoRneR TUmBleR,
S/N 10737, 1.5 HP Motor & Winsmith 943 Gear
Reducer, Barrel Height Max 34" Barrel Dia. Max
20" Approx; Safety Gate Fencing & Lock,
Auto/Manual (Location K2)
1 – polYmeR moDel 912 Spl DoUBle AnGle
CUT GRAnUlAToR, S/N 3000421, 7.5 HP
Motor, Opening 12" w x 9" h (Location K2)
1 – 10,500 GAllon FlUiD SToRAGe TAnKS
(Location K2)
1 – CRS mATeRiAl Silo, Weight Capacity 45,000
Lbs, Silo Diameter 12' x Height 24', Support Stand
13' x 13' (Location K2)
CHILLERS
1 – AeC AQUA SnAp moDel 30RAn045
pRoCeSS CHilleR, AEC Model 756087 Water
Tank, S/N 36G0138, 15 HP Process Pump, 15 HP
Standby Pump, 10 HP Chilled Water Pump;
Omron Digital Control (Location K2)
1 – AeC moDel C7000 CHilleR SYSTem,
S/N 97D0739, 20 HP Chiller Process Pump, 20
HP Chiller Standby Pump, 7.5 HP Chiller Recirc
Pump; RDS-I Remote Diagnostic Station, Model
C7000 Tank, Panel S/N 46857Q (Location K1)
1 – AeC moDel C500D CHilleD wATeR TAnK,
S/N 30L0437, Two (2) x 15 HP Motors & Pumps,
One (1) 7.5 HP Motor & Pump (Location K1)
TEMPERATURE CONTROLLERS
3 – GAmmAFlUX moDel e9500-18437 HoT RUnneR TempeRATURe ConTRolS, IDs #0698-18437-01, #0698-18437-02, &
#0698-18437-01, (Locations K1)
1 – GAmmAFlUX moDel e9500-18142 HoT RUnneR TempeRATURe ConTRol, ID 0298-18142-01 (Location K1)
5 – GAmmAFlUX moDel e9500 HoT RUnneR TempeRATURe ConTRolS, S/Ns 0399-19078-02, 0101-21078-01,
0998-18563-01 & 0898-18437-01 (Location K1)
1 – GAmmAFlUX moDel TTC-23390 HoT RUnneR TempeRATURe ConTRol, S/N 0403-23390-01 (Location K1)
1 – GAmmAFlUX moDel TTC-24481 TTC 2100 HoT RUnneR TempeRATURe ConTRol, S/N 0304-24481-01, Monitor (Location K1)
1 – GAmmAFlUX moDel TTC-25493 TTC 2100 HoT RUnneR TempeRATURe ConTRol, S/N 1204-25493-01, Monitor (Location K1)
3 – AeC moDel TCU 750 7.5 Hp wATeR TempeRATURe ConTRol UniTS, S/Ns 30M5518, 30M5519 & 30L5484 (Location K2,
K2 & K1)
6 – AeC moDel TCU 300 3 Hp wATeR TempeRATURe ConTRol UniTS, S/Ns 38L1099, 38L1098, 38L1097, 38L1093,
38L1092 & 38L1091 (Locations K1)
3 – AeC moDel TCU 100 1 Hp wATeR TempeRATURe ConTRol UniTS, S/Ns 38L1096, 38L1095 & 38L1094 (Locations K1)
1 – AeC moDel TFwinX wATeR TempeRATURe ConTRol UniT, S/N 97J5336 (Location K1)
1 – AeC wHiTloCK moDel Al-031Gp AUToloADeR HoppeR loADeR, S/N 98J0418 (Location K1)
1 – nATionAl BUlK eQUipmenT moDel 2-051-60CS mATeRiAl HoppeR FeeDeR, S/N 400940005-1, Top Diameter 54",
Dual Lid, 1.5 HP Drive (Location K1)
MATERIAL BLENDERS
1 – AeC wHiTloCK moDel oS-014-5 FoUR ComponenT mATeRiAl BlenDeR, S/N 35AO525, Four (4) Vacuum Pumps, Colorant
Feed (Location K1)
2 – AeC wHiTloCK moDel oS-007-4Q mATeRiAl BlenDeRS, S/Ns 33E0497 & 33E0498, Hopper with Auto Slide Gate, Max
Blending Capacity 350 Lbs/Hour, Allen Bradley Panelview 550 Terminal (Locations K2)
2 – mAGUiRe moDel wSB 241T FoUR ComponenT mATeRiAl BlenDeRS, S/Ns 96155-04 & 96605-04 (BoTH 2000),
Two (2) AEC Model TL-50 Loaders, MPI Blend Controls (Locations K1)
1 – mAGUiRe moDel wSB-222 FoUR ComponenT mATeRiAl BlenDeR, S/N 90370 Controller, Two (2) Auto Loader
Series One Plus Controls; Two (2) AEC Model SRL04 Vacuum Loaders, 1.5 HP; Add On Pellet Feeder (Location K1)
1 – wAlTHeR CoATinG SYSTem, Includes: Infeed Hopper & Tumbler; Walther Model MDG 45 Pressure Tank, S/N 62185; 48"
x 72" Floor Scale; Ten Lane Sorter; Bin Type Turntable; Sampler Unit (Location K1)
For more information, please visit us on the web at www.hilcobid.net 3

MATeRiAl duMPeRS • AiR coMPReSSoRS • cRAneS • PAcKAGinG
MATERIAL DUMPERS
3 – imCS moDel 20-5033Sp HYDRA DUmp mATeRiAl ConTAineR DUmpeRS,
S/Ns 15680, 15680 & 15680, Width 53", Dump Height 58", Manual Deflector w/Slide
Gate, (Locations K1)
1 – imCS moDel 20-5033Sp HYDRA DUmp mATeRiAl ConTAineR DUmpeR, S/N 14656,
Width 53", Dump Height 58", 12" Slide Gate, 7.5 HP Motor & Pum, (Location K1)
1 – imCS moDel 20-5021Sp HYDRA DUmp 12" SliDe GATe mATeRiAl
ConTAineR DUmpeR, S/N 13475, 2 HP Motor & Pump
7 – imCS moDel 25-6000 pneUmATiC GAYloRD ConTAineR TilT TABle FlooR
leVelS, S/Ns 16871, 15085, 15056, 14477, 12258, N/A & N/A, Load Capacity 2,000
Lbs, Tilt Capacity 1,250 Lbs (Locations K1)
AIR COMPRESSORS
2 – ATlAS CopCo moDel GA90CFF 125 Hp AiR CompReSSoRS, S/Ns AII 477078 &
AII 477134, Type GA90C, 480 CFM, Elektronikon II Control, New Core Installed 2011,
Filters (Location K1)
1 – GARDneR DenVeR moDel eBeRFH 25 Hp SCRew CompReSSoR,
S/N U60840, Hours 32,510; Ultra Air Filter, Auto Sentry S Control (Location K1)
1 – mAnCHeSTeR TAnK moDel mAwp 165 400 GAllon AiR ReCeiVeR TAnK, Cat
#3127 (1999), Nat'l BD 559438, GRN L4014.5C (Location K1)
1 – CAmpBell HAUSFelD moDel wl611200AJ 6.25 Hp poRTABle
CompReSSoR, S/N N/A, 30 Gallon Tank, Emerson Single Phase Motor, 120 Volt
(Location K2)
CRANES
1 – SpAnCo 3 Ton TRAVellinG GAnTRY CRAne, 3 Ton Electric Hoist, Span 14' Approx,
Height 16' Approx (Location K1)
1 – 2 Ton TRAVellinG GAnTRY CRAne, Width 10', CM Valustar Electric Hoist, 2-Way
Pendant Control (Location K1)
1 – VeSTil moDel wTJ-e-15-3 3 Ton FlooR moUnTeD JiB CRAne, Power Winch
Model E3000, Boom Extension 42" - 66" (Location K2)
VACUUM SEALERS
2 – AZeVeDoS inDUSTRiA moDel mV-100 VACUUm SeAleRS, S/Ns 51000 07 98
& 51000 12 98 (BoTH 1998), Vacuum / Gas Fill / Heat Seam (Locations K1)
PACkAgINg
1 – SAFeline meTAl DeTeCTion SYSTem, S/N 16338-01, Belt Conveyor 20" Wide,
Opening 5.5" High, Programmable Control (Location K1)
1 – CoUSinS pACKAGinG inC moDel lp2100 low pRoFile TURnTABle
STReTCH wRAppeR, S/N 02053-2L-4484, Turntable Diameter 57", Pac Sci Drive &
Emerson Gear Box, Film Roll Max 20" Wide (Location K1)
1 – CoUSinS pACKAGinG inC moDel lp2100 low pRoFile TURnTABle
STReTCH wRAppeR, S/N 270897-903, Turntable Diameter 57", Two (2) 1/2 HP Pac
Sci Drives, Film Roll Max 20" Wide, 115 Volt (Location K2)
1 – QUAnTiTY oF pioneeR AppRoX 60 BoXeS oF 24" X 42" X .004" CleAR BAGS
- 100 Count Boxes (Location K2)
1 – QUAnTiTY oF Aep AppRoX 23 RollS STReTCH wRAp, Width 20", Core Diameter 3"
1 – inTeRpACK moDel HSD2000nC HiGH SpeeD TApe HeAD, With Entrance
Conveyor, Between Posts 27" (Location K1)
PRINTINg MACHINES
1 – CoRK pRinTinG mACHine, 16 Piece Turnstile, Stainless Steel Table, Allen Bradley
Panelview 600 Terminal, IDC Motor, Allen Bradley SLC 5/03 I/O's, Diode S Hot Air Tool
(Location K1)
1 – CoRK pRinTinG mACHine (printer 5), 16 Piece Turnstile, Stainless Steel Table,
Quick Panel Jr Terminal, Vari-Speed Motor, Diode S Hot Air Tool (Location K1)
2 – ApeX moDel C-42 CoRK pRinTinG mACHineS (printer 3), S/Ns 94237 & NA (Location K1)
4
To schedule an auction, please call HilcoBid at 1-855-HilcoBid (44526243)

lAB & TeST equiPMenT • ToolRooM
LAB & TEST EqUIPMENT
1 – miTUToYo moDel pH-A14 14" opTiCAl CompARAToR, S/N 801010, Code #172-810A, 2-Axis
Mitutoyo DRO, Light Exchange (Location K2)
1 – inSTRon moDel 3345 low FoRCe SinGle ColUmn TeSTinG SYSTem,
ID 3345Q4946, Capacity 5 kn, Vertical Test Space 44.2", Dell PC & Monitor (Location K2)
1 – TApeX CoRp moDel TiTAn T-6 emBoSSeR, S/N N/A, Control Dials - Time Exposure / Time Dryer /
Temp Controller Washer / Temp Controller Dryer, Dial - Washout Unit (Location K1)
1 – Dillon moDel AFG-2500n QUAnTRol ADVAnCeD FoRCe GAUGe (Location K2)
1 – new HeRmeS inC moDel iS400 eleCTRoniC enGRAVinG mACHine, S/N N01.786/BL (2001),
Pendant Control, 32 cm cc, Cylinder & Plate Engraving, Plate Grayostyle 98 & Gravostyle 5 Software
Versions, Dell Optiplex 755 Computer & Monitor, Yellow Software Key (Location K1)
1 – GoTTFeRT moDel 1000 RHeo TeSTeR, S/N 62153/20327 (2006), Instrument Type
012.01.0/2006, PC & Monitor (Location K2)
1 – meCmeSin moDel mUlTiTeST 1 CompUTeR ConTRolleD TenSile TeST SYSTem,
S/N 06-1009-12, PC, Monitor & HP Design Jet 70 Printer (Location K-2)
1 – TC2 Dillon moDel QUAnTRol HARDneSS TeSTeR, S/N 03-1001-03 (2003), Dell Optiplex 850
PC & Monitor (Location K-2)
1 – eRGiTRon moDel peRFilAB CoRK eXTRACTion FoRCe meASURinG SYSTem, S/N 059,
Intertronic ID Gauge (Location K-2)
1 – niKon moDel SmZ645 miCRoSCope, S/N 1002937, Model C-PS Stand (Location K1)
1 – moTiC moDel Dm143 DiGiTAl miCRoSCope, NTSC System (Location K2)
1 – mini SCAn moDel 45/o-l Xe plUS SpeCTRomeTeR, S/N 6954 (Location K2)
2 – THeRmo eleCTRon CoRp moDel 3624 6lm pReCiSion inCUBAToRS, S/Ns 103198-20 &
804081588, Two Door, Interior 17" D x 36" W x 26" H, 120 Volt (Locations K2)
1 – THeRmo pReCiSion 280 SeRieS miCRopRoCeSSoR ConTRolleD wATeR BATH (Location K2)
1 – moCon moDel 2/21 oX-TRAn moDUlAR oXYGen peRmeABiliTY STYSTem, S/N 1103Q605, N2
& O2 Humidity Adjustments, Two (2) Twelve Station Manifold Units, HP Compaq Computer, Monitor,
HP Printer (Location K2)
TOOLROOM
1 – CnC mASTeRS moDel CnC Jr 3-AXiS CnC VeRTiCAl mill,
S/N 106786, Table Top Model, Travels: X - 19", Y - 7", Z - 5"; Column
Diameter 4.5", Table 8.25" x 28.75", 2 HP Drive Motor, PC & Monitor, Base,
NOTE: One Axis Motor not Working (Location K2)
1 – JeT moDel JmD-18 2 Hp VeRTiCAl mill, S/N 8101198,
Stock 350018, Table 9.5" x 32", 230 Volt - Single Phase, Quill Travel 5"
(Location K2)
1 – DAYTon moDel 3Z919C 20" DRill pReSS, S/N N/A, Single Phase -
110 Volt, 3/4 HP Motor, Vise (Location K1)
1 – JeT moDel GH-1340w-1 13" x 40" enGine lATHe, S/N 803W2301W,
Hole Through Spindle 1.5", Tailstock, Cross Slide, Tool Post, Inch/Metric,
Speeds 40-1800 RPM, 6" 3-Jaw Chuck (Location K2)
1 – JeT moDel HVBS-7mw HoRiZonTAl BAnD SAw, S/N 0011-861,
Stock 414459 (Location K2)
1 – Zee pRoTeCToR moDel pRoTeCToR i eYe wASH STATion
(Location K1)
1 – RiDGiD moDel Cm14000 14" ABRASiVe CUT-oFF SAw, S/N 99144
J0429, 110 Volt (Location K1)
1 – STeel woRK BenCH w/RYoBi 8" BenCH GRinDeR (Location K1)
1 – milwAUKee HeAVY DUTY Deep CUT BAnDSAw (Location K1)
1 – milleR moDel milleRmATiC 300 3-pHASe welD poweR
SoURCe, S/N LA051914, Radnor Gun; Excludes Tank (Location K2)
This auction will be conducted on Hilco’s new online auction platform, HilcoBid.net
HilcoBid.net features cutting-edge technology to provide the best online auction bidding experience available.
Our Online Auditorium allows bidders to view up to 15 lots at once with real-time updates and indicators to
highlight new bids placed, lots closing and time extensions. Similar lots are sychronized, so if you're outbid on
a particular lot, time will extend on all like items to give you a chance to bid on a similar item. With a simple
interface and a clean look, HilcoBid is the new standard for online auctions.
*Please note: Previously registered Hilco Industrial Online buyers will need to create a new account at HilcoBid.net. Bidders
may reuse previous username if it meets the site requirements. Contact and credit card information will be required.
Visit at www.hilcobid.net, create an account* and register for an auction today.
For more information, please visit us on the web at www.hilcobid.net 5

RollinG STocK • RAW MATeRiAlS • MiSc. SHoP & oFFice equiPMenT
ROLLINg STOCk
1 – Genie moDel GS-3246 SelF pRopelleD SCiSSoR liFT, S/N N/A, Capacity Platform Retracted
700 Lbs / Platform Extended 250 Lbs / 450 Lbs, Platform 3' 9" x 7' 5", Extension 3' Long, Built-in Battery
Charger, (Location K2)
1 – niSSAn moDel CYmo2l25S 5,000 lB eleCTRiC FoRKliFT, CHASSIS #CYM02-950421, Type ES,
Lift Height 187" Max, Triple Stage Mast, Side Shift, Forks 42" (Location K1)
1 – niSSAn moDel CYmo2l25S 5,000 lB eleCTRiC FoRKliFT, CHASSIS #CYM02-004637, Type ES,
Lift Height 187" Max, Triple Stage Mast, Side Shift, Forks 42" (Location K2), NOTE: Not Running
1 – miTSUBiSHi moDel 2FBC20 4,000 lB eleCTRiC FoRKliFT, S/N A2BC2-60216, Lift Height 188" Max,
Triple Stage Mast, Side Shift, Forks 48" (Location K2); NOTE: Delayed Delivery
1 – niSSAn moDel CSp01l18S 2,450 lB eleCTRiC FoRKliFT, CHASSIS #CSP01-9A0023, Type ES, Lift
Height 187" Max, Triple Stage Mast, Side Shift, Forks 42", 36 Volt Battery (Location K1)
1 – FeRRo FiVe FR SeRieS 36 VolT BATTeRY CHARGeR, S/N IPIU947036, Spec Z04174, DC Output 185
Amps, 18 Cells, Compucharge Control (Location K1), NOTE: Delayed Delivery
1 – HoBART moDel 1050H3-18 36 VolT BATTeRY CHARGeR, S/N 396CS12166, Spec S00188-001,
18 Cells, Battery Type LA (Location K2), NOTE: Delayed Delivery
1 – inTeRnATionAl / nAViSTAR moDel 4700 4x2 TRUCK, VIN 1HTSCAAM5YH280733, Miles 113,531;
Navistar Model DT466 Engine, Automatic Transmission, Day Cab, GVWR 25,500 Lbs, Front 8,000 Lbs
Capacity / Rear 17,500 Lbs Capacity, Dual 50 Gallon Tanks; METRO TRUCK BODY Enclosed
Trailer - Length 24' x Height 11' 10" Tall, Roll-Up Door Opening 92" W x 89" H; NOTE: Delayed Delivery
1 – BlUFF mFG moDel 15TFl7260 STeel DoCK BoARD FoRKliFT RAmp, S/N 33762, Width
64" x Length 60", Capacity 15,000 Lbs (Location K1)
1 – STeel DoCK BoARD FoRKliFT RAmp, Width 53" x Length 72" (Location K2)
RAw MATERIAL
• BIH10 Chemical Blowing Agent - Approx 33.600 Lbs
• POLYPROPYLENE - Approx 135,000 Lbs
• KEMAMIDE E Wax - Approx 500 Lbs
• HOSTAMAX ANTIOXIDANT
• CLARIANT COLORANT MATERIAL
MISCELLANEOUS SHOP & OffICE EqUIPMENT
2 – BiG ASS FAn 10 SpoKe CeilinG FAnS, Diameter 20' Approx,
Rheostat Speed Control (Location K1)
1 – QUAnTiTY oF STAinleSS STeel mATeRiAl (Location K2)
1 – enpAC 5300-Ye 600-GAl. Spill ConTAinmenT CADDY (Location K1)
1 – HAZ SToR oUTDooR SToRAGe loCKeR, Size 32" D x 64" W x 60" H
(Location K1)
1 – A&A SeCURAll moDel B-600 SAFeTY SToRAGe loCKeR,
Size 60"D x 84" W x 90" H, Includes Indco Model C-HS-320E Mixer,
S/N 0107425000101 (Location K1)
1 – SeCURAll 2-DooR FlAmmABle SToRAGe CABineT (Location K1)
2 – JUSTRiTe loT: Two (2) FlAmmABle SAFeTY CABineTS,
55 Gallon & 30 Gallon Capacity (Location K1)
1 – JUSTRiTe 25700 55 GAllon FlAmmABle SAFeTY CABineT (Location K1)
1 – eAGle 1905 16 GAllon FlAmmABle SAFeTY CABineT (Location K1)
1 – DURHAm 36" STeel CABineT wiTH ConTenTS: Brass Seals,
Brass Bushings, Pins & Guide Pins (Location K1)
1 – DAYTon pAlleT JACK (Location K1)
1 – DAYTon pAlleT JACK, Capacity 5,500 Lbs (Location K1)
1 – weSCo pAlleT JACK, Forks 48" (Location K1)
1 – weSCo pAlleT JACK, Capacity 27" x 48" (Location K2)
1 – RiDGiD 2 in 1 6.5 Hp BloweR VAC (Location K1)
1 – STinGeR 2.5 GAllon weT/DRY VAC (Location K2)
1 – BeRTolASo moDel epSilon R BoTTle FilleR, S/N PTS
1101008 (2001) (Location K2)
1 – imeR poRTABle miXeRS (Location K1)
1 – HUSKY GHm 105890 poRTABle miXeR, S/N 33859, Approx
5 Cu Ft, RPM 1680/1790, 110 Volt (Location K2)
1 – pARKeR 10mF poRTABle FilTRATion SYSTem,
S/N G 10C 1X853006, Leeson Motor (Location K1)
1 – US SCAle moDel FS4848-5K 5,000 lB CApACiTY FlooR
SCAle, S/N 032504-1, Class III; SPX Model 672 Precision
Scale, S/N 159124 (Location K1)
1 – US SCAle moDel FS4848-5K 5,000 lB FlooR SCAle,
S/N 61397-1; GSE Model 672 Precision Scale - 1000 g x .05 g, S/N
159126 (Location K2)
1 – iSHiDA moDel mTe-300 300 lB eleCTRiC SCAle,
S/N 0408731C, Capacity 300 x .1 Lb (Location K1)
1 – iSHiDA igx 150 KG eleCTRiC SCAle, S/N 06092112, Platform 21.5" x
15.5", Capacity 150 kg x .05 kg / 300 lb x .1 lb (Location K2)
1 – meTTleR ToleDo VipeR Sl30 75 lB. eleCTRiC SCAle, S/N
2548965, Platform 9.5" x 13.75", Capacity 75 Lb x .005 Lb (Location K1)
1 – meTTleR ToleDo pB602-S mono BloC eleCTRiC SCAle,
S/N 1119350692, Capacity 610 g x .1 g
1 – ADAm eQUipmenT moDel CBw-65a eleCTRiC SCAle ReAD
oUT, S/N AE3315 80275 (Location K2)
1 – STinGeR ST STeAmeR pReSSURe wASHeR/STeAm CleAneR,
S/N 1299-143, Wayne Oil Burner, Portable Base (Location K2)
1 – 10' FiBeRGlASS lADDeR, Capacity 300 Lbs
1 – 8' RollinG STAiRCASe, S/N C0504, Capacity 350 Lbs
2 – FlAG poleS (Location K1)
1 – Hp DeSiGn JeT 750C ColoR ploTTeR, S/N ESA5B05330 (Location K2)
LARGE QUANTITY OF LYON 48" STEEL CABINET; TENNSCO 36"
STEEL CABINET; 36" STEEL CABINET (Location K1); PALLET RACK
SECTIONS 42" x 108" (Location K1); PALLET RACK SECTIONS 36" x
120" (Location K2); DAYTON 32" INDUSTRIAL FANS, Floor Base
(Location K1); SAFETY GUARD RAILING - Sections 5' to 16' Long;
VESTIL MODEL PLPG 4848 PLASTIC PALLETS - 48" x 48" x 6"; NUCON
CORP MODEL 2A PE-HD PLASTIC PALLETS 45" x 48" x 6"; DIC
PALLET MODEL LB-1311 PLASTIC PALLETS 43" x 51" x 6", #2 HDPE;
ALLEN BRADLEY PANELVIEW & SLC PROCESSOR PARTS
QUANTITY OF WOOD TOP DESKS, STEEL FOREMAN DESKS; OFFICE
FURNITURE: LAPTOP COMPUTERS, DESKS, PARTITIONS, CHAIRS
6
To schedule an auction, please call HilcoBid at 1-855-HilcoBid (44526243)

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong
Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Toronto • Villahermosa (MX)
Hilco industrial, llc
A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s
Headquarters
31555 W. Fourteen Mile Road, Suite 207
Farmington Hills, MI 48334
Ph: 877-37-HILCO (44526)
Fx: 248.254.9995
www.hilcoind.com
Presorted
First Class Mail
U.S. Postage
pAiD
Detroit, Mich.
Permit No. 100
Forwarding Service Requested
Hilco induSTRiAl online AucTion
By order of
Terms of Sale
A buyer’s premium of 18% for all sales is in effect with a 3%
discount for paying with cash, certified funds or wire transfer.
Everything will be sold to the highest bidder for cash online,
in accordance with the Auctioneer’s customary “Terms of
Sale”, copies of which will be posted online and are subject
to additional terms that may be posted on the website the
day of sale. All items will be sold “as is, where-is” without any
warranties, express or implied. Although obtained from
sources deemed reliable, the Auctioneer makes no warranty
or guarantee to the accuracy of the information herein
contained. Bidders are encouraged to thoroughly inspect the
items on which they intend to bid prior to sale. Absolutely no
items will be removed until the day after the conclusion of the
sale and payment is made in full. Subject to additions,
deletions and prior sale.
Payment: ALL PURCHASES MUST BE PAID IN FULL ON
THE DAY OF THE AUCTION. If you intend to pay by wire
transfer, we will accept payment the day after the sale
ONLY IF a deposit of 25% of total purchases is made on
the day of the sale. Contact our office for wire transfer
instructions. Only cash, wire transfer or certified check,
payable to Hilco Industrial, LLC will be accepted. Company
checks payable to Hilco Industrial, LLC will be accepted
only if accompanied by a bank letter of guarantee, (see
sample letter below). All sales are subject to sales tax.
Purchasers claiming exemptions from taxes must provide
proof satisfactory to the Auctioneer of their entitlement to
claim such exemptions.
Sample Bank Letter
(Bank Name) unconditionally guarantees payment to
Hilco Industrial, LLC from (Company Name). This
guarantee will be valid for purchases made at the
Auction of SupremeCorq on March 31, 2011.
Follow
Us on:
HilcoBid is a division of Hilco Trading, llc • Headquarters 5 Revere drive, Ste. 206 • northbrook, il 60062 • All rights reserved
Printed in uSA • SuPR3508 • il license #444.00215 • Please visit our website at www.hilcobid.net to review our complete terms and conditions.