Download Brochure - Hilco Industrial

HILCAST TM WEBCAST AUCTION
Pursuant to the U.S. Bankruptcy Court,
assets formerly used by
THIS EQUIPMENT IS LOCATED AT 515 POPLAR STREET • KENTON, TN 38233
(22) PLASTIC INJECTION MOLDING MACHINES
WEDNESDAY, NOVEMBER 5TH
Beginning at 10am Local Time
Auction Location
515 Poplar St. • Kenton, TN 38233
(All equipment will be sold from this location)
2-Day Preview
Monday & Tuesday, November 3rd & 4th
9am to 4pm Local Time or Earlier By
Appointment. Please contact Mark
Reynolds at 205.595.5999 or Email
mreynolds@hilcoind.com
Preview Locations
515 Poplar St. • Kenton, TN 38233
396 State Hwy. • Winnsboro, SC
539 N. Belevedere Rd • Gallatin, TN 37066
Directions
To Kenton, TN Location:
From Nashville International Airport:
Exit the airport and take the ramp to I-40 W. Keep right at the fork to continue
toward I-40 W. Keep right at the fork to continue toward I-40 W and merge onto
I-40 W. Go 134 miles and take exit 82B for US-45 N toward Milan. Turn right at N
Highland Ave/TN-5/US-45. Continue to follow N Highland Ave/TN-5. Take the
ramp onto TN-186/TN-5/US-45 Continue to follow TN-5. Continue on TN-366/US-
45/US-45W. Go 3.4 miles and turn right at N Central Ave/TN-5/US-45W. Continue
to follow TN-5/US-45W. Go 7.2 miles and make a slight right toward TN-5/TN-
54/US-45/US-45W. Make another slight right at TN-5/TN-54/US-45/US-45W.
Continue to follow TN-5/US-45W. Go 20.2 miles and turn right at Williams St.
To Winnsboro, SC Location:
From Charlotte Douglas International Airport:
Head east on Airport Loop/Josh Birmingham Pkwy. Take the ramp onto Billy
Graham Pkwy. Proceed 4 miles continue on W Woodlawn Rd (signs for Rock
Hill). Slight right to merge onto I-77 S Entering South Carolina. Go 56 miles and
take exit 41 toward Winnsboro/Rd 41. Turn right at Old River Rd. Make a slight
left at SC-200. Turn left at 321/N Congress St. Continue to follow 321. Turn right
at 9th St/Ninth St. Turn left at Hunstanton Dr. Turn left to stay on Hunstanton Dr.
To Gallatin, TN Location:
From Nashville International Airport:
Proceed south on Terminal Drive to Donelson Pike. Turn left to take the Donelson
Pike North ramp toward I–40. Merge onto Donelson Pike/TN–255 North. Merge
onto I–40 W via the ramp on the left toward Knoxville. Proceed 1.4 miles on I–40
to Briley Pkwy./TN–155 N. Merge onto Briley Pkwy./TN–155 N via Exit 215B and
proceed 8.7 miles to I–65 N. Take the I–65 N exit, Exit 15 16, toward
Louisvlle/Ellington Pky./Briarville Rd./US–31E S. Merge onto I–65 N via Exit 16A
on the left toward Louisville. Proceed 5.5 miles on I–65 N. Keep right to take
Vietnam Veterans Blvd./TN–386 N via Exit 95 toward Hendersonville/ Gallatin.
Proceed 15 miles on Vietnam Veterans Blvd./TN–386 N. Vietnam Veterans
Blvd./TN–386 N becomes Long Hollow Pike/ TN–174. Proceed .7 miles to
Belvedere Dr N. Turn right onto Belvedere Dr N and proceed .1 mile to the preview
site, 539 N Belvedere Dr., Gallatin, TN 37066.
Travel Information
Airlines:
American Airlines . . . . . . . . . . . . . . 800.433.7300
Northwest Airlines . . . . . . . . . . . . . 800.225.2525
United Airlines . . . . . . . . . . . . . . . . 800.241.6522
Delta Airlines . . . . . . . . . . . . . . . . . 800.221.1212
Southwest Airlines . . . . . . . . . . . . . 800.435.9792
Further Information
• A buyer’s premium will be in effect. The auction will be
conducted in English, accepting U.S. Currency only.
• Removal Deadline is Friday, November 21st, 2008
with Hours of Removal between 8am to 4pm Monday
thru Friday. After November 21st at 4pm buyer will
incur a cost of $500 daily for entry into the facility.
• For further information please contact
Mark Reynolds at 205.595.5999
or Email mreynolds@hilcoind.com
• For Payment & Customer Service please contact
Sandi Neely at 248.254.9999 x16 or Email
sneely@hilcoind.com
VAN DORN DEMAG
MODEL700H-RS-125F-LP
700-TON X 125 OZ.
PLASTIC INJECTION
MOLDING MACHINE
FARRELL 1000-TON
PLASTIC INJECTION
MOLDING MACHINE
(1 OF 2) FARREL
700-TON PLASTIC INJECTION
MOLDING MACHINES
THE FOLLOWING EQUIPMENT IS LOCATED AT 515 POPLAR STREET • KENTON, TN 38233
(22) PLASTIC INJECTION MOLDING MACHINES
1 – VAN DORN MODEL 1000H-RS-165LP 1000-TON X 165 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 143, Hydraulic
Clamp, Platen Size 64” x 64”, Tie Bar Spacing 52” x 44”, Finley Tech Touch Screen Control (#5)
1 – FARRELL 1000-TON PLASTIC INJECTION MOLDING MACHINE, S/N 80WH1323-2, Hydraulic Clamp, Platen Size 70” x 63”, Tie
Bar Spacing 52” x 44”, Finley Tech Touch Screen Control (#4)
1 – VAN DORN DEMAG MODEL 700H-RS-125F-LP 700-TON X 125 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 659 (1994),
Hydraulic Clamp, Platen Size 62” x 53”, Tie Bar Spacing 45” x 36”, Path Finder Microprocessor Controls (#93)
1 – VAN DORN DEMAG MODEL 700H-RS-125F-LP 700-TON X 125 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 660 (1994),
Hydraulic Clamp, Platen Size 62” x 53”, Tie Bar Spacing 45” x 36”, Path Finder Microprocessor Controls (#11)
1 – FARREL 700-TON PLASTIC INJECTION MOLDING MACHINE, S/N 80WH1322-2, Hydraulic Clamp, Platen Size 60” x 51”, Tie Bar
Spacing 44” x 35”, Finley Tech Microprocessor Controls (#3)
1 – FARREL 700-TON PLASTIC INJECTION MOLDING MACHINE, S/N 80WH1-322, Hydraulic Clamp, Platen Size 60” x 51”, Tie Bar
Spacing 44” x 35”, Allen Bradley Panel View Plus 1000 Microprocessor Controls (#2)
1 – UBE MODEL UM 500-T 500-TON PLASTIC INJECTION MOLDING MACHINE, S/N 83956 (1999), Toggle Clamp, Platen Size 46” x
46”, Tie Bar Spacing 32” x 32”, Xycom Microprocessor Controls (#23)
1 – UBE MODEL PZ 500 UST-SA 500-TON PLASTIC INJECTION MOLDING MACHINE, S/N 24699 (1992), Toggle Clamp, Platen Size
46” x 46”, Tie Bar Spacing 32” x 32”, Humma UBE Injection Control System (#10)
1 – UBE MODEL PZ 500 UST-SA 500-TON PLASTIC INJECTION MOLDING MACHINE, S/N 24698 (1992), Toggle Clamp, Platen Size
46” x 46”, Tie Bar Spacing 32” x 32”, Humma UBE Injection Control System
1 – VAN DORN DEMAG MODEL 500H-RS-60F 500-TON X 60 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 719 (1994),
Hydraulic Clamp, Platen Size 47” x 47”, Tie Bar Spacing 32” x 32”, Path Finder Microprocessor Controls (#91)
1 – VAN DORN DEMAG MODEL 500H-RS-60F 500-TON X 60 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 718 (1994),
Hydraulic Clamp, Platen Size 47” x 47”, Tie Bar Spacing 32” x 32”, Microprocessor Controls (#90)
1 – HPM MODEL H400-32, 400-TON X 32 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 94245 (1996), Hydraulic Clamp, Platen
Size 43” x 43”, Tie Bar Spacing 30” x 30”, Command 9000 Microprocessor Controls (#12)
1 – HPM MODEL H300-ED-32, 300-TON X 32 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 96345 (1996), Hydraulic Clamp,
Platen Size 42” x 42”, Tie Bar Spacing 30” x 30”, CPI Microprocessor Controls (#13)
1 – VAN DORN MODEL 300-RS-30F 300-TON X 30 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 1472, Toggle Clamp, Platen
Size 36” x 40”, Tie Bar Spacing 24” x 24”, Relay Electrics (#6)
1 – NIIGATA MODEL NN275H 275-TON PLASTIC INJECTION MOLDING MACHINE, S/N 35756H (2000), Toggle Clamp, Platen Size
35” x 35”, Tie Bar Spacing 24” x 24”, Microprocessor Controls (#22)
1 – CINCINNATI MILACRON MODEL VT-220-20, 220-TON X 20 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N T37A0193024,
Toggle Clamp, Platen Size 30” x 30”, Tie Bar Spacing 21” x 19”, Camac VEL Microprocessor Controls (#24)
1 – VAN DORN MODEL 200-RS-14F 200-TON X 14 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 2384, Toggle Clamp, Platen
Size 30” x 32”, Tie Bar Spacing 21” x 18”, Relay Electrics (#10)
1 – TOSHIBA MODEL ISG 90V21-2, 90-TON PLASTIC INJECTION MOLDING MACHINE, S/N 392201 (2003), Hydraulic Clamp, Platen
Size 21” x 21”, Tie Bar Spacing 14” x 14”, Injectvisor V21 Microprocessor Controls, Techomagnete Electromatic Mold Chuck
1 – VAN DORN HT SERIES MODEL 85-RS-5F-HT 85-TON X 5 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 493 (1993),
Toggle Clamp, Platen Size 23” x 24”, Tie Bar Spacing 13” x 13”, CRT Path Finder Microprocessor Controls (#33)
1 – VAN DORN HT SERIES MODEL 85-RS-5F-HT 85-TON X 5 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 210 (1990),
Toggle Clamp, Platen Size 23” x 24”, Tie Bar Spacing 13” x 13”, CRT Path Finder Microprocessor Controls (#32)
1 – VAN DORN HT SERIES MODEL 85-RS-5F-HT 85-TON X 5 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 209 (1990),
Toggle Clamp, Platen Size 23” x 24”, Tie Bar Spacing 13” x 13”, CRT Path Finder Microprocessor Controls (#31)
1 – VAN DORN HT SERIES MODEL 85-RS-5F-HT 85-TON X 5 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 520 (1994),
Toggle Clamp, Platen Size 23” x 24”, Tie Bar Spacing 13” x 13”, CRT Path Finder Microprocessor Controls (#30)
Additional Plastic Injection Molders Available at the Winnsboro, SC Location (See Page 5)
2
For more information, visit us on the web @ www.hilcoind.com