Download Brochure - Hilco Industrial

HILCO ONLINE AUCTION
By order of
TRUSS MANUFACTURING EQUIPMENT, WALL PANEL SYSTEM,
LATE MODEL KENWORTH TRACTORS, TRAILERS,
FORKLIFTS, BOOM TRUCK, VEHICLES
Online Bidding Starts: Tuesday, February 10th at 11am ET
Online Bidding Ends: Tuesday, February 17th
Assets Located In Washington
Hilco Industrial, LLC
A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s
Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong
Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York
San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)
www.hilcoind.com

HILCO ONLINE AUCTION
By order of
ONLINE BIDDING STARTS
Tuesday, February 10th at 11am ET
ONLINE BIDDING ENDS
Tuesday, February 17th
Please visit www.hilcoind.com for closing times.
PREVIEW
February 10th to 16th
8am to 4pm Local Time
For further information, please contact
Joe Hanratty at 206.510.9576
For Machinery & Equipment please contact
Tim Pfister at 847.313.4747
or Email tpfister@hilcoind.com
LOCATION OF ASSETS
3500 Hoehne Avenue • Longview, WA 98632
DIRECTIONS TO PREVIEW
From Portland: Take 1-5 N Towards Seattle
(28.8mi), Take Exit 36 to Merge to WA-432W
Towards Long Beach / Longview / WA-4W
(4.7mi.) Turn Left on Washington Way
(1.2mi), Turn Right on Industrial Way (0.7mi),
Turn Right on Prudential Blvd (0.3mi), Turn
Right on Hoehne Ave - Facility on the Left.
FURTHER INFORMATION
• A buyer’s premium of 16% will be in effect for
all sales. This auction will be conducted online
in English, accepting U.S. Currency only.
• The removal deadline is Friday, February
27th, with hours of removal between 8am
to 4pm Monday thru Friday. After February
27th at 4pm, the buyer will incur a cost of
$500 for entry into the facility.
• For General & Equipment information,
please contact Tim Pfister at 847.313.4747
or Email tpfister@hilcoind.com
• For Customer Service & Payments please
contact Sandi Neely at 248.254.9999 x16
or Email sneely@hilcoind.com
REAL ESTATE ALSO AVAILABLE
BY PRIVATE NEGOTIATION
Please see page 6 of this brochure
for more information.
KENWORTH T-800B TRACTOR (T64),
VIN: 1XKDDB9X47R187271,
RTLO016918AASS,
18 Speed Auto Shift Transmission
(62,194mi) CAT C-15 Diesel 475-HP,
A-Cert Engine, 80,000 GVW (A#000468)
TRACTORS & TRAILERS
2008
2008 TRANSCRAFT TRAILER
KENWORTH T-800B TRACTOR (72),
VIN: 1XKDDB9X69R237977,
RTOD18910BAS2, 10-Speed Auto Shift
Transmission, CAT C-15, 475-HP, A-Cert
Diesel Engine, 80,000 GVW (14,935mi)
2007
2008
TRACTORS
1 – 2008 KENWORTH T-800B TRACTOR (72), VIN: 1XKDDB9X69R237977, RTOD18910BAS2, 10-Speed Auto Shift
Transmission, CAT C-15, 475-HP, A-Cert Diesel Engine, 80,000 GVW (14,935mi)
1 – 2007 KENWORTH TRACTOR (T64) MODEL T-800B, VIN: 1XKDDB9X47R187271, RTLO016918AASS,
18 Speed Auto Shift Transmission (62,194mi) CAT C-15 Diesel 475-HP, A-Cert Engine, 80,000 GVW (A#000468)
1 – 2007 KENWORTH TRACTOR (T65) MODEL T-800B, VIN: 1XXKDDB9X67R187272, RTLO016918AAS3,
18 Speed Auto Shift Transmission, (47,919mi) CAT C-15 Diesel, 475-HP, A-Cert Engine, 80,000 GVW (A#000469)
1 – 2004 KENWORTH T-300 TRACTOR (T38) MODEL T-300, VIN: 2NKMHD7X04M068374, Allison Automatic
Transmission, (166,275mi), CAT C-7, 275-HP Diesel Engine, Hydraulic Dump Flat Bed, 16’ x 96” Deck, Side Box,
Headache Rack, 34,000 GVW (A#000276)
1 – 2003 KENWORTH TRACTOR (20) MODEL T-800B, VIN: 1XKDDB9X83R394014, RTLO18918B Transmission,
(195,166mi) CAT C-15, 475-HP Diesel Engine, 80,000 GVW (A#000248)
1 – 1993 FORD L9000 TRACTOR (T33), VIN: 1FTYY95X7PUA14836, CAT 3406, 350-HP Diesel Engine, 9-Speed
Road Ranger, (250,406mi), PTO, 52,000 GVWR (A#00026)
TRAILERS
1 – 2008 TRANSCRAFT TRAILER (AT), VIN: 1TTF4520881085494, 45’ x 102” Deck, Aluminum Decking, Tie Downs,
Air Brakes, Sliding Front Axle, Princeton Piggy Back Fork Lift Ready
1 – 2007 TRANSCRAFT TRAILER (AQ), VIN: 1TTF4520171083360 MODEL EAGLE IIN FS2, 45’ X 102” Deck,
Moveable Front Axle Air Brake, Princeton Piggy Back Forklift Ready (A#000479)
1 – 2007 JDH TRUSSMASTER ROLL-OFF EXPANDABLE TRAILER (#AR), VIN: 1L9RD442X7C094633, 45’ x 101”
Deck, Tie Downs, Air Brakes, Hydraulic Tip (A#000484)
1 – 2006 TRANSCRAFT TRAILER (AD), VIN: 1TTF4520862014626, 45’ x 96” Deck, Tie Downs, Air Brakes,
Aluminum Deck, Princeton Piggy Back Fork Lift Ready (A#000324)
1 – 2006 LINCOLN TRUSS TRAILER (AM), VIN: 1L9U0432561104401, 42’ x 102” Deck, Tie Downs, Air Brakes, Built
In Dunnage (A#000403)
1 – 2006 LINCOLN TRUSS TRAILER (AL), VIN: 1L9U0432361104400, 42’ x 102” Deck, Tie Downs, Air Brakes, Built
In Dunnage (A#000404)
1 – 2006 LINCOLN TRUSS TRAILER (AP), VIN: 1L9U0432771104410, 42’ x 102” Deck, Tie Downs, Air Brakes, Built
In Dunnage (A#000428)
1 – 2001 LINCOLN TRUSS TRAILER (P), VIN: 1L9U0372811104283, 30’ x 101” Deck, Tie Downs, Air Brakes (A#000503)
1 – 1992 LYNNWOOD TRAILER (I), VIN: LTE49212286, 43’ x 96” Deck, Tie Downs, Air Brakes, Built In Dunnage (A#000423)
1 – 1991 WABASH EXPANDABLE TRUSS TRAILER, VIN: 1JJF69267ML151122, 45’ x 102” Deck, Rear Expanding,
Tie Downs, Air Brakes, Built In Dunnage (A#000180)
1 – 1990 LYNWOOD DUMP TRAILER (B), VIN: LTE79011050, 32’ X 96” Deck, Tie Downs, Air Brakes, Twin Hydraulic
Cylinders, Three Axle (A#000006)
1 – 1987 TRANSCRAFT STEP DECK TRAILER (L), VIN: 1TTE45302H1029027, 45’ x 96” Deck, Tie Downs, Air Brakes (A#000264)
1 – 1971 K-BULL TRAILER (D), VIN: 71147, 42’ x 102” Deck, Tie Downs, Air Brakes (A#000012)
2
For more information, visit us on the web @ www.hilcoind.com

WALL PANEL SYSTEM • TRUSS EQUIPMENT • SAWS
2006
WEINMANN WALL PANEL PRODUCTION SYSTEM
WALL PANEL SYSTEM
1 – WEINMANN WALL PANEL PRODUCTION
SYSTEM, PROFI WEM 250/06 Framing
System, S/N 0-396-01-0008 (2006), With
Saw for Multi Walls, 9’ Max., WHP100/L
0-394-01-0158 Automatic Stud Loading
System: PROFI WTW 150/06 Table 1, S/N
0-391-11-0117, Staging, PROFI WTW
150/06 Table 2, S/N 0-391-07-0794, With
Staging, PROFI WTW 150/06 Table 3, S/N
0-391-07-0695, With Staging & Sheathing,
PROFI WMS 150 Bridge, 0-392-07-0175
Nailing & Cut-Out/Trim System, With (1)
Router & (2) Nail Guns, PROFI WTW 150/06
Table 5, S/N 0-391-07-0797, With Staging,
Designed for Additional Bridge, PROFI WTW
150/06 Table 6, 0-391-09-0592, Top Plate
Installation, PROFI WTW 150/06 Table 7, 0-
391-07-0798, With Staging, PROFI WTW
150/06 Table 8, With Staging, 0-391-07-
0799, PROFI WTW 150/06 Table 9, 0-391-
07-0800, With Stacker, PROFI WHX 300
Handling Stacking System, 0-394-07-0289
1 – WEINMANN OPTIMAT WHP100/L MATERIAL
LOADING SYSTEM, 0-394-09-0187
1 – WEINMANN OPTIMAT PROFI WBZ120/6F
COMPONENT SAW, 0-390-09-0112
1 – WEINMANN WES COMPONENT NAILER,
S/N 0-396-07-0028 (2006), (4) Guns, Staple,
(Cripples, T’s, L’s, U’s)
1 – ROGERS 50-HP QNW-V-50-F ROTARY
SCREW AIR COMPRESSOR, S/N 060364
(2006), With Graphic Operator Access
Terminal, Toshiba Adjustable Speed Drive
1 – MANCHESTER 240-GALLON RECEIVING
TANK (2006), 200 psi
1 – ZEKS 250 HSGA400 COMPRESSED AIR
DRYER, S/N 268749 (2006), With Digital
Controls
TRUSS EQUIPMENT
1 – ROBBINS ENG ST1115624 SUPER TORQUE
FINISH ROLLER, S/N ST098806G (2007), 14’
Width (A#000415)
1 – PACIFIC AUTOMATIC 4-HEAD AUTO FLAT
STACKER (2006), With 4-Stack Placement, Exit
Roller Conveyor (A# 000433)
1 – ROBBINS ENG FAT MAN FLOOR TRUSS
PRESS, S/N ST0993.06F-1 MODEL FMII
SP886224, 40’ Length, Auto Clamping, 48 Working
Surface Truss Flipper, Over Head Plate Rack
(A#000414)
1 – ROBBINS ENG FAT MAN JACK JACK SPECIAL
TABLE TRUSS SYSTEM (A#000389)
1 – BIRD BLOCK DRILL, 3-Shaft
SAWS
1 – KOSKOVICH SERVO-OMNI ROBOTIC
COMPONENT SAW, S/N S02K634424 (2006), (5)
Saw Blades ((3) 20”, (1) 30”, (1) 12”), Pedestal
Control, 23-Axis, Matthews Ink Jet Printing
System, Blade Stands, Remote Monitor, Shaker
Side-Pans, Wired for 220/440 volt, 3 phase
(A#000400)
1 – EMSI SCRAP INCLINE CONVEYOR (A#000435)
1 – EMSI 20’ POWERED IN-FEED LIVE DECK
(2006), (5) Powered Cords (A#000434)
1 – ALTENDORF F45 SLIDING TABLE SAW,
S/N 06-04-10-051 (2006), 12” Blade, 72” Ripping
Capacity, Slider 3400 In-Feed System (A#000470)
1 – HOLTEC TRANS CUT II PRECISION CROSSCUT
SYSTEM (2005), 60” Cutting Width (A#000411)
1 – ALPINE 401A SPEED RAFTER CUTTING
SYSTEM, S/N 401A06008-000, With 10’ In-Feed
Conveyor, 20’ Out-Feed Conveyor (A#000431)
1 – ALPINE S5A-17 SPEED CUT METRA-CUT SAW,
S/N R1614, 20’ In-Feed & Out-Feed Conveyor
1 – SPEED CUT RADIAL ARM SAW, 16” Blade, 5-HP
1 – WILTON 8” X 13” HORIZONTAL BAND SAW,
S/N 7050141, 1-HP, 1” Blade, Manual Clamping
DOOR MACHINERY
1 – KVAL DL-2 DOOR LITE CUT-OUT MACHINE (2001), With
Thumb operated clamping system to lock cutter head, Edge
detailing for wood or metal doors, KVAL Acrobat Metal Door
Pre-Hanging Machine With Outswing door support, KVAL MDA-3
Door Pre-Hanging Station, Four Leg extensions for 38 1/2” pass
line height, (A#00534)
1 – NORFIELD MAGNUM DOOR & JAMB MACHINE (A#000092)
AIR COMPRESSOR
1 – ROGERS 50-HP QNW-V-50-F ROTARY SCREW AIR
COMPRESSOR, S/N 060225 (2006), With Graphic Operator
Access Terminal, Toshiba Adjustable Speed Drive (A#000408)
1 – MANCHESTER 240-GALLON RECEIVING TANK (2006),
200 psi
1 – ZEKS 250 HSGA400 COMPRESSED AIR DRYER, S/N 265859
(2006), With Digital Controls
MATERIAL HANDLING
1 – CRANE TECHNOLOGY INC 2-TON SINGLE GIRDER
TOP-RUNNING BRIDGE CRANE, With Harrington 2-Ton Hoist,
Radio Control, 45’ Span (Approx.), 15’ Under Hook (Approx.)
1 – GENIE GS-2032 800-LB. PLATFORM LIFT, S/N 28437 (2000),
Electric, 30”W x 90” Extendable Platform, Max 120”L
2 – 700-LB. SPREADER BARS, 12’ x 18’ Length
100 – 42” x 60” 4-WHEEL STEEL SHOP CARTS
15 – 14’ HEAVY DUTY PALLET RACKING, With 8’ Cross Members
1 – HARRINGTON 1-TON ELECTRIC HOIST, With Remote Controls
4 – 3 CU. YD. SELF-DUMPING HOPPERS
2 – 5 CU. YD. SELF-DUMPING HOPPERS
1 – BT 5000-LB. PALLET JACK
1 – INTERNATIONAL PALLET STRETCH WRAPPING MACHINE
1 – 11-STEP SAFETY LADDER
4 – STRAPPING CARTS, With Tools
PLANT & SUPPORT EQUIPMENT
1 – STINGER ST3 PLUS DIESEL HOT WATER PRESSURE
WASHING SYSTEM, S/N 394-1534
1 – ZEP DYNA CLEAN PARTS WASHER
1 – SOLAR 6/12 BATTERY CHARGER, 250/185 Amp, 60/40/2 Amp
4 For more information, visit us on the web @ www.hilcoind.com

DOOR MACHINERY • AIR COMPRESSOR • MATERIAL HANDLING
WEINMANN OPTIMAT PROFI WBZ120/6F COMPONENT SAW
KOSKOVICH SERVO-OMNI ROBOTIC COMPONENT SAW
2006
2006
ALTENDORF F45 SLIDING TABLE SAW
ROBBINS ENG FAT MAN FLOOR TRUSS PRESS
2006
PACIFIC AUTOMATIC 4-HEAD AUTO FLAT STACKER
2007
ROBBINS ENG ST1115624 SUPER TORQUE FINISH ROLLER
ROGERS 50-HP
QNW-V-50-F
ROTARY SCREW AIR
COMPRESSOR
2005
HOLTEC TRANS CUT II
PRECISION CROSSCUT
SYSTEM
2006
To schedule an auction, please contact us at 248.254.9999 5

For Sale
Tri-County Truss Facility
3500-3550 Hoehne Avenue, Longview
• 6 Buildings - 74,746 SF Including 12,000 SF Freestanding 2-Story Office Building
• Project Completed in 2007
• 37.79 Acre Site - Mostly Paved
• Heavy Industrial (M2) Zoning
• Located in The Mint Farm Close to I-5
• Located Between Seattle and Portland
• Heavy Power and All Major Utilities
• Office is Sprinklered with HVAC
• 15’ to 22’ Clear Height - Mostly Clear Span Space
• Most Floor Slabs 5” or 6” Reinforced Concrete
• Sale Price: $12,861,543
11235 SE 6th Street, Suite 130
Bellevue WA 98004
425 586 5600 phone
425 455 9138 fax
www.nai-psp.com
The information contained herein has been given to us by the owner of the property or other sources we
deem reliable, we have no reason to doubt its accuracy, but we do not guarantee it. All information
should be verified prior to purchase or lease.
Tri-County Truss Facility AS 1023
For More Information Contact:
Arie Salomon, SIOR, CCIM Mike Newton
direct 425 586 5636 direct 425 586 5626
asalomon@nai-psp.com
mnewton@nai-psp.com
Darrell Okada, SIOR, CCIM Jeff Forsberg, CCIM
direct 425 586 5623 direct 425 586 5610
dokada@nai-psp.com
jforsberg@nai-psp.com

For Sale
Tri-County Truss Facility
3500-3550 Hoehne Avenue, Longview
12,000 SF Two-Story Office Building Main Office Building
Office in Main Office Building
Office in Main Office Building

For Sale
Tri-County Truss Facility
3500-3550 Hoehne Avenue, Longview
Lockers in Panel Building
Lunchroom in Panel Building
Copy/Mail Room in Main Office Building
Office in Main Office Building

For Sale
Tri-County Truss Facility
3500-3550 Hoehne Avenue, Longview

For Sale
Tri-County Truss Facility
3500-3550 Hoehne Avenue, Longview
Production Building #3 Production Building #2
Production Building #1 Production Building #1
For More Information Contact:
Arie Salomon, SIOR, CCIM Mike Newton
direct 425 586 5636 direct 425 586 5626
asalomon@nai-psp.com
mnewton@nai-psp.com
Darrell Okada, SIOR, CCIM Jeff Forsberg, CCIM
direct 425 586 5623 direct 425 586 5610
dokada@nai-psp.com
jforsberg@nai-psp.com

Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK)
London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)
Hilco Industrial, LLC
Auctioneers • Liquidators • Appraisers
Headquarters
31555 W. Fourteen Mile Road, Suite 207
Farmington Hills, MI 48334
Ph: 248.254.9999
Fx: 248.254.9995
www.hilcoind.com
Presorted
First Class Mail
U.S. Postage
PAID
Detroit, Mich.
Permit No. 100
Forwarding Service Requested
ONLINE AUCTION
By order of
TRUSS MANUFACTURING EQUIPMENT, WALL PANEL SYSTEM,
LATE MODEL KENWORTH TRACTORS, TRAILERS,
FORKLIFTS, BOOM TRUCK, VEHICLES
Online Bidding Starts: Tuesday, February 10th at 11am ET
Online Bidding Ends: Tuesday, February 17th
Assets Located In Washington
HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062
All rights reserved • Printed in USA • (#DEAL) • IL License #444000215
Please visit our website at www.hilcoind.com to review our complete terms and conditions.
Terms of Sale
A buyer’s premium of 16% is in effect. Everything will
be sold to the highest bidder for cash at this online
auction, in accordance with the Auctioneer’s
customary “Terms of Sale”, copies of which will be
posted on the website at www.hilcoind.com. All items
will be sold “as is, where –is” without any warranties,
express or implied. Although obtained from sources
deemed reliable, the Auctioneer makes no warranty
or guarantee to the accuracy of the information
herein contained. Bidders are encouraged to
thoroughly inspect the items on which they intend
to bid prior to sale. Absolutely no items will be
removed until payment is made in full. Please visit
www.hilcoind.com for removal dates and times.
Subject to additions, deletions and prior sale.
Payment: ALL PURCHASES MUST BE PAID IN
FULL ON THE DAY OF THE AUCTION. If you intend
to pay by wire transfer, we will accept payment the
day after the sale ONLY IF a deposit of 25% of total
purchases is made on the day of the sale. Contact
our office for wire transfer instructions. Only cash,
wire transfer or certified check, payable to Hilco
Industrial, LLC will be accepted. Company checks
payable to Hilco Industrial LLC will be accepted only
if accompanied by a bank letter of guarantee, (see
sample letter below). All sales are subject to sales
tax. Purchasers claiming exemptions from taxes
must provide proof satisfactory to the Auctioneer of
their entitlement to claim such exemptions.
Sample Bank Letter
(Bank Name) unconditionally guarantees payment to
Hilco Industrial, LLC from (Company Name).
This guarantee will be valid for purchases made
at the Online Auction of Tri-County Truss on
February 17th.