roof truss, woodworking & support - Hilco Industrial

HILCO ONLINE AUCTION
By order of the secured party, assets of
ROOF TRUSS, WOODWORKING & SUPPORT EQUIPMENT
MATERIAL HANDLING & ROLLING STOCK
1998
Online Bidding Starts: Tuesday, November 25th at 10 am Local Time
Online Bidding Ends: Wednesday, December 3rd
Assets Located In Illinois
Hilco Industrial, LLC
A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s
Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong
Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York
San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)
www.hilcoind.com

HILCO ONLINE AUCTION
By order of the Secured Party,
assets of
TRUSS EQUIPMENT
Online Bidding Starts
Tuesday, November 25th
at 10am Local Time
Online Bidding Ends
Wednesday, December 3rd
Please visit www.hilcoind.com
for closing times.
1998
Preview
By appointment only. To schedule an
appointment or for general information
please contact Jack Washbourn at
248.254.9999 x11, Cell 248.459.9350
or Email jwashbourn@hilcoind.com
Preview Location
209 N. Bridge St. • Eleroy, IL
(Approx. 40 Miles West of Rockford)
Directions
Eleroy Illinois is located on US Hwy. 20,
Approximately 40 Miles West of Rockford, IL.
Eleroy is an extremely small community; the
Plant is Visible off Hwy 20 on the North Side.
Travel Information
Airlines:
American Airlines . . . . . . . . 800.433.7300
Northwest Airlines . . . . . . . . 800.225.2525
United Airlines . . . . . . . . . . 800.241.6522
Delta Airlines . . . . . . . . . . . 800.221.1212
Southwest Airlines . . . . . . . 800.435.9792
Further Information
• A buyer’s premium will be in effect.
The auction will be conducted in English,
accepting U.S. Currency only.
• Removal Deadline is Friday,
December 12, 2008 with Hours of
Removal between 8am to 4pm Monday
thru Friday. After December 12th at 4pm
buyer will incur a cost of $500 daily for
entry into the facility.
• For further information please contact
Jack Washbourn at 248.254.9999 x11,
Cell 248.459.9350 or
Email jwashbourn@hilcoind.com
• For Payment & Customer Service please
contact: Sandi Neely at 248.254.9999 x16
or Email sneely@hilcoind.com
ALPINE ENGINEERING PRODUCTS MODEL 705 RAM GANTRY WOOD ROOF TRUSS ASSEMBLY LINE
TRUSS EQUIPMENT
1 – ALPINE ENGINEERING PRODUCTS MODEL 705 RAM GANTRY WOOD ROOF TRUSS ASSEMBLY LINE,
S/N 705-071 (1998), (2) Floor Track Riding Gantry Style Finish Roller Presses, 14' Maximum Width, 7.5-HP Single
Roll Drive, 150' Overall Length, (19) Auto Set 6' x 14' Transfer Tables
1 – TRUSS LINE WITH KLAISLER MODEL 212H 12' 2-ROLL WOOD TRUSS FINISH ROLLER, S/N 1371, 18” Roll
Diameter, Independent 5-HP Geared/Sprocket Top & Bottom Roll Drives, (2) 8'W x 20'L Layout & Transfer Tables,
With Gravity Transfer Rollers, With Pneumatic Height Adjustment
1 – TRUSWAL SYSTEM MODEL PCT PARALLEL CHORD TRUSS MACHINE, S/N 41886 (1986), 30” Maximum
Width, (3) Roller Type Truss Heads, 45' Link Chain Metal Slat In-Feed Conveyor
1 – TRUSWAL SYSTEMS MODEL ROL SPLICER 2 X 4 TRUSS WOOD SPLICER, S/N 42186
1 – TRUSWAL SYSTEMS MODEL PC7 36” 3-STAND TRUSS ROLL MACHINE, S/N 717-86, Common 10-HP
Geared Chain/Sprocket Roll Drive Motor=
1 – TRUSWAL SYSTEMS MODEL MFT 440 3-STAND TRUSS ROLL MACHINE, S/N 8513, Common 10-HP Geared
Chain/Sprocket Roll Drive Motor (Stored)
1 – 8' WOOD TRUSS FINISH ROLLER, S/N NA, 18” Roll Diameter, Independent 5-HP Geared/Sprocket Top & Bottom
Roll Drives (Note: In Storage)
2 – 8' X 20' FRAMING TABLES, With Pneumatic Power Lift, Electric Power Lateral Transfer, Gravity Conveyor
8 – TRIAD 8' X 20' FRAMING LAYOUT TABLES, Pneumatic Adjustable, Power Cross Traverse 2-Strand Gravity
Roller Conveyor (Stored – Pole Shed)
1 – TRIAD MODEL SB 12-HEAD ASSEMBLY MACHINE, S/N 107, (6) Heads, With Electric Drill Motors,
Pneumatic Actuation
1 – DUAL 52” X 40' IN-FEED ROLLER CONVEYOR TABLE, 36' Gravity Section, 4' Power Section
2
For more information, visit us on the web @ www.hilcoind.com

CUT-OFF MARKING SAW • MITER, TABLE, BAND, & PANEL SAWS
KLAISLER MODEL 212H 12' 2-ROLL
WOOD TRUSS FINISH ROLLER
TRUSWAL SYSTEMS MODEL PC 36”
3-STAND TRUSS ROLL MACHINE
KOSKOVICH OMNI MISER AUTOMATED CUTOFF AND MARKING SAW
2004
CLARY MASTER COMPONENT MODEL 340 5-HEAD MITER SAW
ROCKWELL DELTA MODEL 14-RAS
14” RADIAL ARM SAW
AUTOMATED CUTOFF
& MARKING SAW
1 – KOSKOVICH OMNI MISER AUTOMATED
CUTOFF AND MARKING SAW, S/N OM2K4014
(2004), Linear Feed System, Bulk Feeder
Automated In-Feed, 5 Bunk Magazine Feeder,
4-Strand Live In-Feed Deck, Work Piece Length
to 16' Maximum, Cross-Cut Saw Blade, Omni
Edge Ink Jet Printer
MULTI-HEAD MITER SAWS
1 – CLARY MASTER COMPONENT MODEL 340 5-HEAD MITER SAW, S/N NA, 2-Strand Thru-Feed Conveyor,
90 Degree Head Adjustment, Work Piece Length 4' – 20', Linear Actuator Control, (1) Adjustable Saw Carriage Head,
Scrap Discharge Conveyor
1 – CLARY 4-HEAD MITER SAW, S/N 329022, Power Thru-Feed Conveyor, 90 Degree Head Adjustment, Scrap
Discharge Conveyor
TABLE, BAND, PANEL & MITER SAWS
1 – DELTA UNISAW NO. 34-806, 10” TILTING ARBOR TABLE SAW, S/N 94G74931, With Unifence Adjustable Saw
Guide & Custom Table Extension
1 – 12” TABLE SAW, MFG'R & S/N NA, 6' x 8' Custom Steel Table
1 – 30” C-FRAME VERTICAL WOOD CUTTING BANDSAW, Hermance Machine, S/N 31555
1 – ROCKWELL DELTA 14” RADIAL ARM SAW, S/N MX2-5303, With 15' Manual Crank Pusher Type Roller Conveyor In-Feed Table
2 – SPEED CUT MODEL SSA-17, 16” UNIVERSAL RADIAL ARM CUT-OFF SAWS, S/Ns V1902, U1837, With Turntable
Cutting System Miter Table & Gravity Roller Conveyor Tables
2 – ROCKWELL DELTA MODEL 14-RAS RADIAL ARM SAWS, S/Ns 1W6056, 1W6050
1 – ROCKWELL DELTA MODEL 14-RAS 14” RADIAL ARM SAW, S/N FL-2957, With Manual Crank Pusher Type Roller
In-Feed Conveyor
4 – MILWAUKEE MODEL 6486-20 PANEL SAWS, S/Ns 401A403190034, 401A402480037, 401A804250049
(Not In Service), 401A402230029
3 – MILWAUKEE MODEL 6480-20 PANEL SAWS, S/Ns 697A903120018, 697A903030085, 697A903030042
1 – MILWAUKEE MODEL 6490, 10” MAGNUM MITER SAW, S/N 799A49352-0024
1 – DEWALT MODEL DW715, 12” COMPOUND MITER SAW, S/N 299617
2 – DEWALT MODEL DW708, 12” SLIDING COMPOUND MITER SAWS, S/Ns 58665, 58677
7 – DEWALT MODEL DW705, 12” COMPOUND MITER SAWS, S/Ns 24728, 45795, 23323, 64536, 24665, 73191, 35675
DUST COLLECTORS
4 – DELTA MODEL 50850, 1-1/2-HP SINGLE BAG PORTABLE DUST COLLECTORS, S/Ns 016100, 012569, 031623, 031626
4 – DELTA TYPE AP400 1-HP SINGLE BAG PORTABLE DUST COLLECTORS, S/Ns 014042 SF2044, 013732 SF2044,
014048 SF2044, 013300
1 – JET MODEL DC-650 1-HP SINGLE BAG PORTABLE DUST COLLECTOR, S/N 9050289B
To schedule an auction, please contact us at 248.254.9999 3

TRUCK TRACTORS • TRAILERS • FORKLIFTS
2003
(1 OF 2) PETERBILT MODEL PB330 TANDEM AXLE
HYDRAULIC BOOM TRUCK TRACTORS
INTERNTIONAL MODEL 2674 6 X 4
TANDEM AXLE BOOM TRUCK TRACTOR
INTERNATIONAL MODEL 2674 6 X 4
TANDEM AXLE BOOM TRUCK TRACTOR
INTERNATIONAL MODEL 8300 4 X 2
SINGLE AXLE TRUCK TRACTOR
(1 OF 2) CASE MODEL 586E CONSTRUCTION
KING ROUGHT TERRAIN FORKLIFTS
HYSTER MODEL H165XL2,
14,800-LB. CAPACITY FORKLIFT
VIEW OF WABASH & DORSEY TANDEM AXLE
SINGLE DROP FLATBED TRAILERS
BOOM TRUCK TRACTORS
2 – 2003 PETERBILT MODEL PB330 TANDEM AXLE HYDRAULIC BOOM TRUCK
TRACTORS, VIN: 2NPNLDOX73M801350, 2NPNLDOX93M801351, National
Model 600D 16-TON Hydraulic Boom, S/Ns 35112, 35111, 47' Main Boom,
29' 2-Section Swing-Away Jib, Anti Two-Block, 4-Point Hydraulic Outriggers, Front
Bumper Mounted Hydraulic Stabilizer, Front Bumper Mounted Boom Support,
Peterbilt 330 Tandem Axle 5th Wheel Chassis, CAT. 3126E Diesel, Eaton Fuller
RT8908LL Transmission, 18,000-LB. Front Axle, Dana SPC-D5P41, 4:11
40,000-LB. Rears, Hendrickson Rubber Block Torsion Bar Suspension, Sliding 5th
Wheel, 385/65R22.5 Front Tires on Aluminum Disc Wheels, 11R22.5 Drive Tires on
Disc Wheels (#s 02 & 03) (Note: VIN# 1351 Hydraulic Boom Not In Service. Winch
& Main Boom Cylinder Removed.)
1 – 1995 INTERNATIONAL MODEL 2674, 6 X 4 TANDEM AXLE BOOM TRUCK
TRACTOR, VIN: 1HSGLAUT2SH211034, National Model 500C 15-TON Hydraulic
Boom, S/N 26326, 38' Main Boom, 25' 2-Section Swing-Away Jib, 2-Point Hydraulic
Outriggers, Front Bumper Mounted Boom Support, Cummins L-10/280 Diesel,
Eaton Fuller 8LL Transmission, Hendrickson Spring Suspension 425/65R22.5 Front
Tires on Spoke Wheels, 11R22.5 Drive Tires on Spoke Wheels, Air Slide 5th Wheel,
202” Wheel Base, Double Frame, Dual Hydraulic Power Steering (#8)
1 – 1992 INTERNATIONAL MODEL 2674, 6 X 4 TANDEM AXLE BOOM TRUCK
TRACTOR, VIN: 1HSGLCUT2NH424016, National Series 500B 12-1/2-TON
Hydraulic Boom, S/N 22881, 50' Main Boom, 23' 2-Section Swing-Away Jib, 2-Point
Hydraulic Stabilizers, Front Bumper Mounted Hydraulic Stabilizer, With Boom
Support, Cummins Diesel, Fuller 8LL Transmission, Hendrickson Spring
Suspension, 11R22.5 Tires on Steel Disc Wheels, 385/65R22.5 Front Tires, Sliding
5th Wheel, Double Frame, Dual Hydraulic Power Steering (#9)
TRUCK TRACTOR
1 – 1990 INTERNATIONAL MODEL 8300 4 X 2 SINGLE AXLE TRUCK TRACTOR,
VIN: 1HSHJGF4LH259912, IH Diesel, Eaton Fuller 9 Speed, Spring Ride, 295/75R
22.5 Tires on Aluminum Disc Wheels (#28)
SINGLE DROP DECK FLATBED TRAILERS
3 – 1995 WABASH 44' TANDEM AXLE SINGLE DROP FLATBED TRAILERS,
VINs: 1JJ4260TL344476 (#05), 1JJ44267TL344474 (#04), 1JJ4269TL344475
(#06), 31' Lower Deck, 13' Upper Deck, 96” Wide, Spring Suspension,
255/70R22.5 Tires on Steel Disc Wheels
2 – DORSEY MODEL DDGTW-I-273, 40' TANDEM AXLE SINGLE DROP FLATBED
TRAILERS, S/Ns 122695 (#11), 122696 (#12), 40,960 GVWR, Maximum
Structural Capacity 65,000-LBS., 29' Lower Deck, 11' Upper Deck, Spring Ride,
9R17.5 Tires on Spoke Wheels
3 – DORSEY MODEL DDGTW-I-276, 40' TANDEM AXLE SINGLE DROP FLATBED
TRAILERS, S/Ns 129058 (#17), 121556 (#07), 122964 (#02), 40,960 GVWR,
Maximum Structural Capacity 55,000-LBS., 29' Lower Deck, 11' Upper Deck,
Spring Ride, 9R17.5 Tires on Spoke Wheels
FLATBED TRAILER
1 – 1995 WABASH 48' TANDEM AXLE FLATBED TRAILER, VIN: 1JJF48265TL244478,
Fixed Tandem, Spring Ride, 96” Wide, 295/75R22.5 Tires on Steel Disc Wheels (#42)
FORKLIFTS
1 – HYSTER MODEL H165XL2, 14,800-LB. CAPACITY FORKLIFT,
S/N E007D04134X, Diesel, Dual 10:00-20 Solid Tires, 212.6” Lift, 2-Stage Mast,
172” Mast Height, Independent Hydraulic Power Fork Positioning, 9' Forks,
Enclosed Cab, 3-Speed Monotrol Transmission, (Approximately 4060 Hours)
2 – CASE MODEL 586E CONSTRUCTION KING ROUGH TERRAIN FORKLIFTS,
S/Ns NA, Diesel, 2 Wheel Drive, 6000-LB. Capacity to 12', 4000-LB. Capacity to
15', 21' Maximum Lift @ 2500-LBS., 2-Stage Mast, 116” Mast Height, Side Shift,
14.9-24 Backhoe Front Tires, 4' Forks, ROPS Canopy (#01 & #02) (Note: #01
Not In Service, Parts Only.)
3 – CASE MODEL 586C CONSTRUCTION KING ROUGH TERRAIN FORKLIFTS,
S/Ns 8980054 (#4), 8957181 (#11), NA (#2), Diesel, 2 Wheel Drive, 6000-LB.
Capacity to 12', 4000-LB. Capacity to 15', 21' Maximum Lift @ 2500-LBS., 2-Stage
Mast, 116” Mast Height, Side Shift, 14.9-24 Backhoe Front Tires, 4' Forks,
ROPS Canopy
4 For more information, visit us on the web @ www.hilcoind.com

TRUCKS • AIR COMPRESSORS • MAINTENANCE SHOP EQUIPMENT
WABASH 44' TANDEM AXLE SINGLE DROP FLATBED TRAILER
DORSEY MODEL DDGTW-I-273 40' TANDEM AXLE
SINGLE DROP FLATBED TRAILERS
(1 OF 2) JOY TWIST AIR TA-025TAS2C
25-HP HOR. TANK MOUNTED ROTARY
SCREW AIR COMPRESSORS
BRIDGEPORT 1-HP 8-SPEED
VERTICAL MILLING MACHINE
2000
CHEVROLET S-10 LS 4X4 EXTENDED CAB
& DODGE RAM 1500 PICKUP TRUCKS
2002
CLAUSING MODEL 5914,
12” X 36” ENGINE LATHE
TO 2006
(1 OF 2) SWEED MODEL
450AFWM SCRAP CHOPPERS
PICKUP TRUCKS
1 – 2002 DODGE RAM 1500 PICK UP TRUCK, VIN: 1D7HA16N42J138197,
2 Wheel Drive, Standard Cab, 4.7L Magnum V-8, Automatic, Air Conditioning,
Hauler Aluminum Ladder Rack, Diamond Plate Aluminum Cross-Over Tool Box
& (2) 46” Side Mount Tool Boxes (176,000 Miles)
1 – 2002 DODGE RAM 1500 SLT PICK UP TRUCK, VIN: 1D7HA16N72J203169,
Standard Cab, 2 Wheel Drive, 4.7L Magnum V-8 Engine, Automatic, Power
Windows/Locks/Mirrors, Air Conditioning (123,931 Miles)
1 – 2000 CHEVROLET S-10 LS 4 X 4 ENTENDED CAB PICK UP TRUCK,
VIN: 1GCDT19W3YK213594, 4.3L V-6 Engine, Automatic, Power
Windows/Locks/Heated Mirrors, 6' Box, With Spray-On Rhino Lining (94,946 Miles)
1 – 1988 CHEVROLET CHEYENNE 2500 4 X 4 PICK UP TRUCK, VIN: N/A, 5.7L
V-8 Engine, Automatic, Standard Cab, Meyer Snow Plow Attachment (917,130 Miles)
DUMP TRUCK
1 – 1977 FORD 8000 SINGLE AXLE DUMP TRUCK, VIN: K80DV047563,
CAT. 3208, 210-HP Diesel, Allison MT 650 Automatic Transmission, 27500
GVWR, 10,860-Lb. Front Axle, 19,040-Lb. Rear Axle, 9' Steel Dump Box,
24” Sides, Wausau Model R3610H 10' Hydraulic Snow Plow Attachment,
S/N 60928-2 (1994), Rear Hydraulic Salt Spreader Attachment, 10:00 x 20 Tires
YARD SWITCHER
1 – GMC 7000 SINGLE AXLE YARD SWITCHER TRACTOR,
VIN: T17DE9V604834, V-8 Engine Gas, 5 x 2 Speed, Hydraulic 5th Wheel
AIR COMPRESSORS
2 – JOY TWIST AIR MODEL TA-025TAS2C 25-HP HORIZONTAL TANK
MOUNTED ROTARY SCREW AIR COMPRESSORS, S/Ns 102882, 125110
1 – INGERSOLL RAND MODEL TS200 REFRIGERATED COMPRESSED AIR
DRYER, S/N DR10017554-060607 (2007)
A buyers of 16% premium will be in effect.
For complete sales terms & conditions visit
www.hilcoind.com
MAINTENANCE SHOP EQUIPMENT
1 – BRIDGEPORT 1-HP 8-SPEED VERTICAL MILLING MACHINE, S/N 12BR105107,
32” Table, 80-2720 RPM
1 – CLAUSING MODEL 5914, 12” X 36” ENGINE LATHE, S/N 507280, Spindle Speeds
52-2000 RPM, Threading, 1-1/4” Hole-Thru Spindle, 6” 3-Jaw Chuck
1 – ROCKWELL/DELTA MODEL 17-600, 17” VARIABLE SPEED FLOOR TYPE DRILL
PRESS, S/N 1581339, Spindle Speeds 230-4250 RPM
1 – GREENLEE MODEL 4-WAY METAL CUTTING BAND SAW, MODEL & S/N NA
1 – RAMCO MODEL RS-90P 7” CAPACITY HORIZONTAL/VERTICAL METAL CUTTING
BANDSAW, S/N 01840
1 – RAMCO MODEL RP50, 50-TON H-FRAME HYDRAULIC SHOP PRESS, S/N 03036
1 – MILWAUKEE MODEL 6176-20, 14” ABRASIVE CUT-OFF SAW, S/N 968D905-2119944
1 – PORTER CABLE MODEL 140, 12” ABRASIVE CUT-OFF SAW
1 – CENTURY 250 DC/295 AC AMP ARC WELDER, S/N NA
1 – AIRCO BUMBLEBEE 250 AMP AC/DC ARC WELDER, S/N NA
1 – MAC MODEL TW9600A 3/4” DRIVE 600 FT. LB. MICROMETER DIAL TYPE TORQUE
WRENCH
2 – SWEED MODEL 450AFWM SCRAP CHOPPERS, S/Ns 41168 (2006), 41169 (2006),
Portable Steel Stand
1 – 1-TON COLUMN MOUNTED JIB CRANE, With Coffing 1-TON Electric Chain Hoist
1 – COFFING 1-TON ELECTRIC CHAIN HOIST
1 – CM VALUESTAR 1-TON ELECTRIC CHAIN HOIST
1 – SIMPLICITY 860SE 24” GAS SNOWBLOWER
1 – CRAFTSMAN HYDRO LT 4000 42”, 14-HP RIDING LAWN MOWER, S/N NA, Kohler
OHV 14-HP Gas Engine
1 – YARD MAN MODEL 11A-503E755, 22” 6-HP PUSH LAWN MOWER, S/N 8184K31634
1 – EZ GO MODEL 52 2-PASSENGER 4-WHEEL BATTERY POWERED GOLF CART,
S/N 1114291
Quantity of Truck & Trailer Repair Parts, Truck Tires, General Maintenance Shop Equipment,
Work Tables, Conveyors, Shop Carts, Over (20) Cecor Portable Metal Scrap Bins, Platform
Trucks, etc.
OFFICES
Office Equipment Including Furniture, Miscellaneous Computer Equipment, Business
Machines, etc.
To schedule an auction, please contact us at 248.254.9999 5

Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK)
London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)
Hilco Industrial, LLC
Auctioneers • Liquidators • Appraisers
Headquarters
31555 W. Fourteen Mile Road, Suite 207
Farmington Hills, MI 48334
Ph: 248.254.9999
Fx: 248.254.9995
www.hilcoind.com
Presorted
First Class Mail
U.S. Postage
PAID
Detroit, Mich.
Permit No. 100
Forwarding Service Requested
HILCO ONLINE AUCTION
By order of the Secured Party, assets of
ROOF TRUSS, WOODWORKING & SUPPORT EQUIPMENT
MATERIAL HANDLING & ROLLING STOCK
1998
Online Bidding Starts: Tuesday, November 25th at 10 am Local Time
Online Bidding Ends: Wednesday, December 3rd
Assets Located In Illinois
HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062
All rights reserved • Printed in USA • COMP • IL License #444000215
Please visit our website at www.hilcoind.com to review our complete terms and conditions.
Terms of Sale
A buyer’s premium of 16% is in effect. Everything will
be sold to the highest bidder for cash at this online
auction, in accordance with the Auctioneer’s
customary “Terms of Sale”, copies of which will be
posted on the website at www.hilcoind.com. All items
will be sold “as is, where –is” without any warranties,
express or implied. Although obtained from sources
deemed reliable, the Auctioneer makes no warranty
or guarantee to the accuracy of the information
herein contained. Bidders are encouraged to
thoroughly inspect the items on which they intend
to bid prior to sale. Absolutely no items will be
removed until payment is made in full. Please visit
www.hilcoind.com for removal dates and times.
Subject to additions, deletions and prior sale.
Payment: ALL PURCHASES MUST BE PAID IN
FULL ON THE DAY OF THE AUCTION. If you intend
to pay by wire transfer, we will accept payment the
day after the sale ONLY IF a deposit of 25% of total
purchases is made on the day of the sale. Contact
our office for wire transfer instructions. Only cash,
wire transfer or certified check, payable to Hilco
Industrial, LLC will be accepted. Company checks
payable to Hilco Industrial LLC will be accepted only
if accompanied by a bank letter of guarantee, (see
sample letter below). All sales are subject to sales
tax. Purchasers claiming exemptions from taxes
must provide proof satisfactory to the Auctioneer of
their entitlement to claim such exemptions.
Sample Bank Letter
(Bank Name) unconditionally guarantees payment to
Hilco Industrial, LLC from (Company Name).
This guarantee will be valid for purchases made at
the Online Auction of Component Systems on
December 3, 2008.