Dodge 6.7 Cummins EGR Delete Installation ... - H&S Performance

More documents

Recommendations

Info

STEP 21 Remove header bolt (third from the rear). STEP 22 Remove spacer from previously removed header bolt and install spacer on supplied header stud. 14 EGR/EGR Cooler Delete Kit Installation Guide • www.hsperformance.com
STEP 23 Install header stud. Torque to 40-50 ft. lbs. STEP 24 Thread supplied spacer onto previously installed header stud. Tighten as tight as possible using fingers. 1-888-628-1730 • EGR/EGR Cooler Delete Kit Installation Guide 15
Page 1 and 2: 1-888-628-1730 1-888-628-1730 • E
Page 3 and 4: KIT CONTENTS 9 1 9 2 3 5 10 4 6 7 8
Page 5 and 6: STEP 3 Remove 4 - 10mm bolts in EGR
Page 7 and 8: STEP 7 Replace gaskets (included) a
Page 9 and 10: STEP 11 Remove 4 - 10mm bolts. If p
Page 11 and 12: STEP 15 Remove 2 - 15mm nuts and re
Page 13: STEP 19 Install threaded plug. For
Page 17 and 18: STEP 27 Bolt H&S bracket to coolant
Page 19 and 20: WARRANTY & DISCLAIMER All EGR Kits

Dodge 6.7 Cummins EGR Delete Installation ... - H&S Performance

Create successful ePaper yourself

Delete template?

Save as template?