QuickSpecs <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> <strong>7000</strong> <strong>Storage</strong> Service and Support, <strong>HP</strong> Care Pack, and Warranty Information Customers purchasing from a commercial reseller can find <strong>HP</strong> Care Pack Services at: www.hp.com/go/lookuptool DA - 14433 Worldwide — Version 5 — December 21, 2012 Page 10
QuickSpecs <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> <strong>7000</strong> <strong>Storage</strong> Configuration Step 1 - Choose a Base configuration <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> <strong>7000</strong> configurations start with the selection of the Base. The Base includes controller nodes, bays for small form factor drives, and PCIe slots for host adapter cards. <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> <strong>7000</strong> Base Configurations <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7200 2-node <strong>Storage</strong> Base <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 2-node <strong>Storage</strong> Base <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 4-node <strong>Storage</strong> Base A minimum of one (1) configuration base must be ordered. The <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7200 base configuration includes (2) controller nodes, 24 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards - one slot per node, (4) 2m SAS cables, (1) mounting rail kit, and power cords. The <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 2-node base configuration includes (2) controller nodes, 32 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards - one slot per node, (4) 2m SAS cables, (2) 1U rack filler panels to reserve 2U of rack space above the 2-node <strong>Storage</strong> Base for a future upgrade to a 4-node configuration, (1) mounting rail kit, and power cords. The <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 4-node base configuration includes (4) controller nodes, 64 GB of cache, (48) small form factor drive bays, (8) built-in 8 Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for host adapter cards - one slot per node, (8) 2m SAS cables, (4) node link cables, (2) mounting rail kits, and power cords. All base configurations include built-in Gigabit Ethernet ports for management and Remote Copy over IP. QR482A QR483A QR485A <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 Upgrade Controller Node Pair Use the <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 Upgrade Node Pair to convert an existing previously installed <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 2-node <strong>Storage</strong> Base into a 4-node configuration. <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 Upgrade Node Pair Used to upgrade the QR483A <strong>HP</strong> <strong>3PAR</strong> <strong>StoreServ</strong> 7400 2-node <strong>Storage</strong> Base to a 4-node configuration. One (1) pair of controller nodes beyond the base configuration is supported on the <strong>3PAR</strong> <strong>StoreServ</strong> 7400. The <strong>3PAR</strong> <strong>StoreServ</strong> 7400 Upgrade Node Pair includes (2) controller nodes, 32 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards - one slot per node, (4) 2m SAS cables, (4) node link cables, (1) mounting rail kit, and power cords The upgrade node pair includes built-in Gigabit Ethernet ports for management and Remote Copy over IP. QR484A DA - 14433 Worldwide — Version 5 — December 21, 2012 Page 11