IBX-650A_UMN_v1.00.pdf - ICP America
IBX-650A_UMN_v1.00.pdf - ICP America
IBX-650A_UMN_v1.00.pdf - ICP America
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>IBX</strong>-<strong>650A</strong> Embedded System<br />
An overview of the rear panel is shown in Figure 2-5.<br />
Figure 2-5: <strong>IBX</strong>-<strong>650A</strong> Rear Panel<br />
2.3.3 Bottom Surface<br />
WARNING:<br />
Never remove the bottom access panel from the chassis while power is still<br />
being fed into the system. Before removing the bottom access panel, make<br />
sure the system has been turned off and all power connectors unplugged.<br />
The bottom surface of the <strong>IBX</strong>-<strong>650A</strong> contains the retention screw holes for the VESA<br />
MIS-D 75 wall-mount kit, the DIN mount bracket and four foot pads. The SO-DIMM socket<br />
access panel is also located on the bottom surface. The SO-DIMM socket access panel is<br />
secured to the <strong>IBX</strong>-<strong>650A</strong> with one retention screw.<br />
Page 30
Change language