TD Ceraphant T PTP35 (PDF 1,11 MB) - Endress+Hauser Ireland
TD Ceraphant T PTP35 (PDF 1,11 MB) - Endress+Hauser Ireland
TD Ceraphant T PTP35 (PDF 1,11 MB) - Endress+Hauser Ireland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hygienic pressure switch for measurement and monitoring<br />
of absolute and gauge pressures<br />
<strong>Ceraphant</strong> T <strong>PTP35</strong><br />
www.ie.endress.com/e-direct<br />
• Suitable for hygienic applications<br />
• Surface finish R a ≤ 0.8 μm<br />
• Three buttons for local set-up, via ReadWin ® 2000 configuration<br />
software or FieldCare<br />
• Stainless steel housing 316L<br />
• Exchangeable modular process connections<br />
Application<br />
The <strong>Ceraphant</strong> T <strong>PTP35</strong> is a pressure switch designed for the<br />
monitoring and control of absolute and gauge pressures in hygienic<br />
applications. It is available with a wide range of process connections<br />
and is suitable for finely graduated measuring ranges from vacuum<br />
to 40 bar.<br />
DESINA<br />
compliant<br />
Function<br />
The process pressure acts on the metallic sensor diaphragm and the<br />
pressure-dependent change in capacitance of the ceramic sensor is<br />
measured. A microprocessor evaluates the signal and provides an<br />
appropriate output.<br />
Application example<br />
Product:<br />
Liquids, vapors and gases<br />
Accuracy:<br />
< 0.5 %<br />
Product temperature:<br />
-40 to +100 °C;<br />
135 °C max. 1 h<br />
Measuring range – limits:<br />
0 to 1 bar, 0 to 40 bar<br />
Filling oil:<br />
FDA-conformity<br />
Outputs:<br />
1 or 2 PNP or<br />
1 PNP with 4 to 20 mA<br />
A) 1 × PNP switch output<br />
1) Power supply<br />
2) Load (e.g. programmable logic<br />
contoller, process contol system, relay)<br />
Technical Datasheet<br />
<strong>TD</strong> 00043E/34/EN/02.12<br />
LL/INDD CS5
<strong>Ceraphant</strong> T <strong>PTP35</strong><br />
Technical data<br />
Dimensions (mm) and materials<br />
Output<br />
Output signal 1 or 2 × PNP or 1 × PNP with 4 to 20 mA<br />
Voltage drop PNP ≤ 2 V<br />
Overload protection Automatic testing of switching current<br />
Power supply U b<br />
Supply voltage 12 to 30 V DC<br />
Current consumption Without load < 60 mA, reverse polarity<br />
protection<br />
Performance characteristics<br />
Reference conditions According to DIN IEC 60770/61003<br />
Measured error < 0.5 %<br />
Long-term drift ≤ 0.15 % per year<br />
Sensor response time ≤ 20 ms<br />
Analog output Non-linearity: ≤ 0.2 % (limit point method)<br />
Non-conformity: non-linearity + hysteresis+<br />
non-repeatability: ≤ 0.5 % (limit point method)<br />
Operating conditions<br />
Medium temperature -40 to +100 °C (+135 °C max. 1 h)<br />
Ambient temperature -40 to +85 °C<br />
Storage temperature -40 to +85 °C<br />
Degree of protection M16 × 1.5 valve plug: IP 65; M12 × 1<br />
connector: IP65 (gauge pressure), IP66<br />
(absolute pressure)<br />
Vibration resistance 20 g to DIN 68-2-6 (10-2000 Hz)<br />
EMC Interference emission as per EN 61326<br />
class B electrical equipment, interference<br />
immunity as per EN 61326 appendix A<br />
(industrial use)<br />
Materials of construction<br />
Process connection 316L/R a ≤ 0.8 μm; housing 316L<br />
Filling fluid FDA compliant oil<br />
Seals<br />
EPDM, without (DA8, BB8)<br />
Operation<br />
Operating elements 3 buttons or PC and software<br />
Approvals<br />
3A; Desina compliant; 3.1.B certificates on request<br />
105<br />
52<br />
<strong>11</strong><br />
M12 × 1<br />
39<br />
24<br />
AISI 316L<br />
R a ≤ 0.8 μm<br />
PA<br />
Electrical connection<br />
DC voltage version with<br />
M12 × 1 connector<br />
A1: 1 × PNP switch output<br />
A2: 2 × PNP switch output<br />
A3: PNP switch output<br />
additional analog output<br />
DC voltage version with<br />
valve plug M16 × 1.5<br />
B1: 1 × PNP switch output<br />
DC voltage version with<br />
cable<br />
A1: 1 × PNP switch output<br />
A2: 2 × PNP switch output<br />
A3: PNP switch output with<br />
additional analog output<br />
Cable specification:<br />
5-core (5 × 0.22 mm 2 );<br />
Colors: 1 = brown,<br />
2 = white, 3 = blue,<br />
4 = black,<br />
ground = green/yellow<br />
SW 41<br />
BB<br />
G 1”<br />
Ø 41<br />
LB<br />
Ø 50<br />
Ø 66<br />
PH<br />
Ø 39<br />
Ø 56<br />
<strong>11</strong>.5<br />
32.5<br />
Ø 29<br />
18<br />
17<br />
DA<br />
Ø 27.5<br />
Ø 34<br />
PL<br />
Ø 51<br />
Ø 68<br />
LL<br />
Ø 68<br />
Ø 84<br />
28<br />
17<br />
18<br />
Dimension incl. coupling nut<br />
Accessory RNB130<br />
Input<br />
Input voltage range 85… 264 V AC, 45… 65 Hz<br />
Current consumption 0,75 A at 120 V AC; 0,45 A at 230 V AC<br />
(for nominal values)<br />
Output<br />
Nominal output 24 V DC / ±1 %<br />
voltage U N<br />
Output current 1,5 A (-25 to +50 °C, U OUT = 24 V) ;<br />
2 A (-25 to +40 °C, U OUT = 24 V)<br />
Dimensions in mm<br />
35<br />
102.5<br />
95<br />
99<br />
Installation according to operation instructions
Measurement range<br />
Meas. range, Unit, Overload<br />
Code Gauge pressure<br />
3H 0… 1 bar, 0… 100 kPa, 4 bar<br />
3M 0… 4 bar, 0… 400 kPa, 16 bar<br />
3P 0… 10 bar, 0… 1000 kPa, 40 bar<br />
3S 0… 40 bar, 0… 4000 kPa, 160 bar<br />
Negative gauge pressure<br />
7H -1… +1bar, -100… +100 kPa, 4 bar<br />
7M -1… +4 bar, -100… +400 kPa, 16 bar<br />
7P -1… +10 bar, -100… +1 000 kPa, 40 bar<br />
Absolute pressure<br />
4H 0… 1 bar, 0… 100 kPa, 4 bar<br />
4M 0… 4 bar, 0… 400 kPa, 16 bar<br />
4P 0… 10 bar, 0… 1000 kPa, 40 bar<br />
4S 0… 40 bar, 0… 4000 kPa, 160 bar<br />
Process connections 1)<br />
Code CLAMP ® connections<br />
DA8 ISO 2852 (½… ¾") 316L, 3A<br />
Hygiene connections<br />
BB8 Thread ISO 228 (G 1 A) 316L,<br />
O-ring seat seal, for muffle 52001051<br />
LB4 Varivent ® F pipe DN25-32, PN40, 316L, 3A<br />
LL4 Varivent ® N pipe DN40-162, PN40, 316L, 3A<br />
PH4 DIN <strong>11</strong>851 DN40 PN40, 316L, 3A<br />
PL4 DIN <strong>11</strong>851 DN50 PN40, 316L, 3A<br />
1)<br />
Additional process connections (e.g. conical sealing)<br />
are available on request.<br />
<strong>Ceraphant</strong> T <strong>PTP35</strong> Order no. Price/pcs. in €<br />
Output Plug Process connection 1 to 3 4 to 10 <strong>11</strong> to 35 Quantity: Total:<br />
1 × PNP<br />
2 × PNP<br />
1 × PNP<br />
with<br />
analog<br />
output<br />
M12 × 1***<br />
M16 × 1.5<br />
5 m cable<br />
M12 × 1***<br />
5 m cable<br />
M12 × 1***<br />
Code DA8, BB8 <strong>PTP35</strong>-A1A1__*1__**A 226.- 218.- 208.- pcs. €<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A1A1__*1__**A 258.- 249.- 237.- pcs. €<br />
Code DA8, BB8 <strong>PTP35</strong>-A2A1__*1__**A 242.- 233.- 223.- pcs. €<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A2A1__*1__**A 274.- 264.- 252.- pcs. €<br />
Code DA8, BB8 <strong>PTP35</strong>-A4A1__*1__**A 255.- 246.- 234.- pcs. €<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A4A1__*1__**A 287.- 277.- 264.- pcs. €<br />
Code DA8, BB8 <strong>PTP35</strong>-A1B1__*1__**A 242.- 233.- 223.- pcs. €<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A1B1__*1__**A 274.- 264.- 252.- pcs. €<br />
Code DA8, BB8 <strong>PTP35</strong>-A4B1__*1__**A 271.- 261.- 249.- pcs. €<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A4B1__*1__**A 303.- 292.- 279.- pcs. €<br />
Code DA8, BB8 <strong>PTP35</strong>-A1C1__*1__**A 278.- 268.- 256.- pcs. €<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A1C1__*1__**A 310.- 299.- 285.- pcs. €<br />
Code DA8, BB8 <strong>PTP35</strong>-A4C1__*1__**A 307.- 296.- 282.- pcs. €<br />
5 m cable<br />
Code LB4, LL4, PH4, PL4 <strong>PTP35</strong>-A4C1__*1__**A 339.- 327.- 312.- pcs. €<br />
* Please add code for measuring range. ** Please add code for process connection. *** Please order cable and plug separately (see below).<br />
Accessories (<strong>Ceraphant</strong> T <strong>PTP35</strong>) Order no. Price/pcs. in € Quantity: Total:<br />
Welding boss with sealing taper for<br />
front connected installation (BB8)<br />
52001051 45.- pcs. €<br />
5 m cable with M12 × 1 plug 52010285 8.50 pcs. €<br />
Configuration kit, USB connection TXU10-AA 88.- pcs. €<br />
Straight plug, without cable (self wired) 52006263 12.- pcs. €<br />
Angled plug, without cable (self wired) 51006327 6.50 pcs. €<br />
Power supply 24 V DC, for DIN rail RNB130-A1A <strong>11</strong>4.- pcs. €<br />
Total price: €<br />
Prices are applicable for <strong>Ireland</strong> until 30.09.2013, in Euro per unit. At <strong>Endress+Hauser</strong> sales and delivery terms excluding value added tax (VAT); Including cost of packing and despatch.<br />
E-direct catalogue (free)<br />
<strong>Endress+Hauser</strong> (<strong>Ireland</strong>) Ltd.<br />
Industrial Instrumentation Centre<br />
Clane Business Park<br />
Clane/County Kildare<br />
<strong>Ireland</strong><br />
Company:<br />
Name:<br />
Street:<br />
City, County:<br />
Phone:<br />
Fax:<br />
direct order:<br />
Internet<br />
Phone<br />
Fax<br />
E-mail<br />
Warranty<br />
Despatch<br />
www.ie.endress.com/e-direct<br />
045 98 92 17<br />
045 86 81 82<br />
e-direct@ie.endress.com<br />
Should an instrument break down<br />
during the warranty period you<br />
will receive a new instrument<br />
48-hour despatch service<br />
Date/Signature