Welding and Testing Symbols - Institution of Engineers Singapore

More documents

Recommendations

Info

TERMS & CONDITIONS COURSE REGISTRATION Registration Any registration, whether on-line or fax will be on a first-come-first-served basis and will only be confirmed upon receipt of full payment by The Institution of Engineers, Singapore (IES) unless otherwise invoice to company. All registrations must be submitted with duly completed registration form. Email registrations will not be accepted. Closing Date & Payment The closing date of the event will be 5 working days prior to event commencement date. Cheques should be crossed ‘A/C payee only’ and made payable to ‘Institution of Engineers, Singapore’ or ‘IES’, with the Title of The Event indicated clearly written on the back of the cheques, and submitted with the duly completed registration forms to: IES Academy 70 Bukit Tinggi Road Singapore 289758 Confirmation of Registration Confirmation of registration will be given 5 working days prior to the commencement date via email, and you are required to acknowledge it. If you do not receive the said confirmation email, you are required to contact IESA general admin immediately at 6463.9211 (office). IESA reserves the right to allow only confirmed registrants to attend the Event. Withdrawals/Refunds of Fees Notice of withdrawal must be given in writing to IESA. Policy on refund of course fee is as follows: FULL refund if we receive your written notice of withdrawal at least 3 working days before the commencement of the Event. NO refund otherwise. No show of participant would not be accepted as reason for withdrawal/refund. Replacement is allowed but restrict to once only. However, when a member is replaced by a non-member, the participant has to pay the difference in the relevant fees applicable before the commencement date. Cancellation/Postponement Changes in Venue, Dates, Time and Speakers for the Events can occur due to unforeseen circumstances. IES reserves the full rights to cancel or postpone the Event under such circumstances without prior reasons. Every effort, however, will be made to inform the participants or contact person of any cancellation or postponement. Fees will be refunded in FULL if any Event is cancelled by IESA. Enquiries For further enquiries, please contact IESA general office at Tel: 6463.9211.
Module 4 Welding and Testing Symbols 11 January 2010 By Sze Thiam Siong Course Outlines The course covers the basic understanding of the information which can appear in a welding symbol, the identification of basic weld symbols, the use of supplementary symbols, and an understanding of the terminology associated with the basic welding symbols. It is essential that the Resident Engineer (RE) and Resident Technical Officer (RTO) who are involved in the welded construction to be familiar with the welding and testing symbols used in the drawings and applicable documents. The following topics will be discussed : ● Welding symbols elements ● Weld symbol locations ● Multiple reference lines ● Combined weld symbols ● Supplementary symbols ● Weld symbol dimensioning ● Fillet and groove weld symbols ● Weld size and depth of bevel considerations ● Flare groove welds Objectives At the end of this module the Resident Engineer (RE) and Resident Technical Officer (RTO) would be able to interpret welding symbols in the drawings and communicate effectively with the various people involved in the design and fabrication work through the use of proper welding and testing symbols. PROFILE OF SPEAKER Mr Sze Thiam Siong is the Director/General Manager of SETSCO, an established testing, inspection, training and consultancy firm. He holds a Bachelor of Engineering (B.Eng) Degree and is a qualified trainer for the American Welding Society (AWS) Certified Welding Inspector (CWI) Program. He is currently the Chairman of the Technical Committee on Non-Destructive Testing (NDT), Member of Technical Committee on Proficiency Testing and Member of Council Committee for Inspection Bodies (CCIB) and Member of Working Group for Structural Steelwork Inspection of the Singapore Accreditation Council (SAC). He is a Member of Technical Committee on Building Structure and Sub-structure of Spring Singapore. He is the 2 nd Vice-President, Chairman of Education/Training Committee and NDT Certification Committee of the Singapore Welding Society (SWS). He has worked many years in the industry and has extensive experience in the field of welding inspection involving pipelines, pressure vessels, structural steelworks and equipment. He lectures regularly at the various professional organizations such as Singapore Structural Steel Society (SSSS), Singapore Quality Institute (SQI), Singapore Welding Society (SWS) and BCA Academy.
Page 1 and 2: Module 4 Welding and Testing Symbol
Page 3 and 4: TERMS & CONDITIONS COURSE REGISTRAT
Page 5 and 6: Registration Form MODULE 4 - WELDIN
Page 35: Registration Form MODULE 4 - WELDIN
Page 87 and 88:
TERMS & CONDITIONS COURSE REGISTRAT
Page 89 and 90:
Registration Form MODULE 4 - WELDIN
Page 91 and 92:
Module 4 Welding and Testing Symbol
Page 93 and 94:
Page 95 and 96:
Registration Form MODULE 4 - WELDIN
Page 97 and 98:
Module 4 Welding and Testing Symbol
Page 99:
show all

Welding and Testing Symbols - Institution of Engineers Singapore

Create successful ePaper yourself

Delete template?

Save as template?