Download product sheet - ME ACTIA GmbH

communication
interface
Power XS®
The powerful hardware for high level vehicle communication
and stand alone application
Designed for rough workshop use:
- robust aluminum housing
- rubber protectors
Personalization by software identifier and changeable label
Carrying strap
Multi protocol support
Similar tool used by one of the biggest automotive manufacturer!
VCI specialists since more than 25 years
I+ME ACTIA GmbH

Characteristics
&
Technical Data
Highlights
Technical Data
Hardware
The Power XS is the high
performance VCI for the next
generation of vehicle diagnosis.
It is the right tool for work shop
use because it is rugged, handy,
battery powered and booting fast.
The internal battery management
system ensures automatic charging
when connected to the car battery.
The watchdog and wake up
mechanism provides low energy
consumption in sleep- mode.
A PC or other client application
realized in the individual
environment of the customer could
be run on the Power- Engine, the
Linux operated processor system of
the Power XS.
Software
Together with the illuminated
graphic display and the
programmable buttons the Power
XS becomes a stand- alone tool for
diagnostic operations, calibration
and programming of vehicles. The
VCI- Engine, an additional 16 bit
micro controller, is used for the
vehicle communication and
protocol handling.
High brightness status LED's can
be observed easily while working
on the vehicle.
Future protocol enhancements are
already foreseen by means of the
MVCI expansion slot.
- Dimensions: 220 x 150 x 50 mm
- Temperature range : 0 … +70 °C
- Power supply : 8…32 V
- Connection to PC : WLAN IEEE802.11g supported
10/100 Ethernet
- Processor : 32 Bit main CPU@400MHz for server
and user applications
- Memory : 1MB RAM and 1 MB Flash
- RAM : 32 … 256 MB DDR RAM
32 … 128 MB NAND FLASH
- K- Line : 300 Bd … up to 320 kBd
- CAN : 10 kBit/s … 1 MBit/s
- Slots : SDcard slot for up to 2GB
PCcard interface for WLAN cards
- Weight : approx. 1.300 g (including batteries)
- Operating system: Linux for PowerPC kernel
- Certifications: IP54
FCC & UL
WEEE
RoHS conform
The Power XS is divided into Power Engine & VCI Engine
for maximum performance and optimized programming.
Linux operating system for PowerPC kernel
Peripherals
Environment
LCD Display
Input buttons
Power
management
Version
management
Serial
number
LEDs/Buzzer
Host PC / Tester
Networking drives (TCP/IP on LAN/WLAN)
Command Server
Complete control
PowerEngine
Flash File System
SPI Driver
User task
Access to application
Directory
Physical layer
drivers
CAN
ISO9141
SCI
J1850
CCD
...
Power Engine
Access to bootloader for firmware
Complete access
Diagnostics
- Supported protocols:
- K- Line ISO 9141
- KWP 2000 ISO 14230- 4
- SAE J1850 PWM
- SAE J1850 VPW
- CAN 2.0B ISO 11898
- CAN ISO 15765- 4
- SCI SAE J2610
- SAE J1708
- SAE J1939
- RP1210A
- J2534- 1, J2534- 2
- Multiple simultaneous links, e.g. J1939 and J1708
- 4 softkeys controlled by application
Bootloader updater
VCI Engine
C++ programming for XC161 firmware and protocol
Command
&
Firmware
Manager
Bootloader updater
Firmware
VCI Engine
Protocol
Manager
Physical layer
drivers
CAN
ISO9141
SCI
J1850
CCD
...
VCI Engine
I+ME ACTIA GmbH
Dresdenstr. 17/18
38124 Braunschweig
Germany
Tel : + 49 (0) 531 38 70 1 0
Fax : + 49 (0) 531 38 70 1 88
www.ime-actia.com
mail: info@ime-actia.de
I+ME ACTIA GmbH
This Product Information Sheet is offered without charge to the customers of I+ME ACTIA GmbH. Data is the most current known to I+ME ACTIA GmbH at the time of preparation and is believed to be accurate.
It should not be construed as guaranteeing specific properties of the products as described or suitability for a particular application. All Information are suitable for modification. © 2013 I+ME ACTIA GmbH IR11917D