LOW SPIN WASHER RC 11 E - IMESA SpA

LOW SPIN WASHER RC 11 E
Loading capacity (ratio 1:10 Europe): 11 Kg
Heating:
Electric
Drum volume (lt): 105
Door diameter (mm): 282
G-Factor: 85
Voltage:
3x400V+N 50Hz
Machine dimension (WxDXH - mm):
720x955x1034
Net weight (Kg): 182
Packing dimension (LxPXA):
760x1045x1350
Gross weight (Kg): 205
Frontal, top and side panels in stainless steel AISI 304;
Drum and outer drum in stainless steel INOX AISI 304 (5 years warranty);
Ground fixing by means of four chemical bolts supplied with the machine.
Balanced water load: the washer is equipped with one hot and one cold water inlet valve. When the program is
started, the washing machine load cold alternate to hot water to reach the set washing temperature in the most
quicker and precise way, time of heating, and consequently the program length, is reduced.
IM9 electronic timer: six fixed programs which can be selected just pressing the corresponding key.
A led on the keypad signals the run program;
While the program is running three led are indicating which detergent is used.
The quick advance key allows to move inside the running cycle or to jump a complete program cycle bringing the
machine in stand-by.
The “Cool Down” key allows to insert a cooling before the drain step.
The spin cycle can be excluded just pressing the “NO SPIN” key before the program start.
Self diagnostic function with anomalies displaying.
Notes: Technical data and characteristics may be changed without any previous notice.
IMESA S.p.A. – Via degli Olmi 22 – 31040 Cessalto (TV)
Azienda certificata ISO 9001
(NR. CERT-00663-95-AQ-VEN-SICERT)

LOW SPIN WASHER RC 11 VD
Loading capacity (ratio 1:10 Europe):
11 Kg
Heating:
Direct Steam
Drum volume (lt): 105
Door diameter (mm): 282
G-Factor: 85
Voltage:
3x400V+N 50Hz
Machine dimension (WxDXH - mm):
720x955x1034
Net weight (Kg): 182
Packing dimension (LxPXA):
760x1045x1350
Gross weight (Kg): 205
Frontal, top and side panels in stainless steel AISI 304;
Drum and outer drum in stainless steel INOX AISI 304 (5 years warranty);
Ground fixing by means of four chemical bolts supplied with the machine.
Balanced water load: the washer is equipped with one hot and one cold water inlet valve. When the program is
started, the washing machine load cold alternate to hot water to reach the set washing temperature in the most
quicker and precise way, time of heating, and consequently the program length, is reduced.
IM9 electronic timer: six fixed programs which can be selected just pressing the corresponding key.
A led on the keypad signals the run program;
While the program is running three led are indicating which detergent is used.
The quick advance key allows to move inside the running cycle or to jump a complete program cycle bringing the
machine in stand-by.
The “Cool Down” key allows to insert a cooling before the drain step.
The spin cycle can be excluded just pressing the “NO SPIN” key before the program start.
Self diagnostic function with anomalies displaying.
Notes: Technical data and characteristics may be changed without any previous notice.
IMESA S.p.A. – Via degli Olmi 22 – 31040 Cessalto (TV)
Azienda certificata ISO 9001
(NR. CERT-00663-95-AQ-VEN-SICERT)

LOW SPIN WASHER RC 11 HW
Loading capacity (ratio 1:10 Europe): 11 Kg
Heating:
Hot water
Drum volume (lt): 105
Door diameter (mm): 282
G-Factor: 85
Voltage:
3x400V+N 50Hz
Machine dimension (WxDXH - mm):
720x955x1034
Net weight (Kg): 182
Packing dimension (LxPXA):
760x1045x1350
Gross weight (Kg): 205
Frontal, top and side panels in stainless steel AISI 304;
Drum and outer drum in stainless steel INOX AISI 304 (5 years warranty);
Ground fixing by means of four chemical bolts supplied with the machine.
Balanced water load: the washer is equipped with one hot and one cold water inlet valve. When the program is
started, the washing machine load cold alternate to hot water to reach the set washing temperature in the most
quicker and precise way, time of heating, and consequently the program length, is reduced.
IM9 electronic timer: six fixed programs which can be selected just pressing the corresponding key.
A led on the keypad signals the run program;
While the program is running three led are indicating which detergent is used.
The quick advance key allows to move inside the running cycle or to jump a complete program cycle bringing the
machine in stand-by.
The “Cool Down” key allows to insert a cooling before the drain step.
The spin cycle can be excluded just pressing the “NO SPIN” key before the program start.
Self diagnostic function with anomalies displaying.
Notes: Technical data and characteristics may be changed without any previous notice.
IMESA S.p.A. – Via degli Olmi 22 – 31040 Cessalto (TV)
Azienda certificata ISO 9001
(NR. CERT-00663-95-AQ-VEN-SICERT)