AMQP Specification Transport
AMQP Specification Transport
AMQP Specification Transport
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AMQP</strong> <strong>Specification</strong>.<br />
Link<br />
5.14.6 Command: 0x030b (park messages)<br />
Signature: park( options: map, first: sequence-no, last: sequence-no )<br />
The park command is used to indicate that the specified range of incoming transfers cannot be processed at<br />
this time, but that other (future) transfers will continue to be processed, and therefore the indicated messages<br />
should be held on the link until unparked. Once a message has been parked it can no longer be released or<br />
rejected. Any continuation transfers within the specified range are ignored. For this command to have any<br />
effect, it MUST be sent before the identified transfers are acknowledged.<br />
Field Details:<br />
options: map<br />
options map (optional)<br />
first: sequence-no<br />
(required)<br />
The start of the incoming command range.<br />
last: sequence-no<br />
(optional)<br />
The end of the incoming command range. If not set then this is taken to be the same as first.<br />
<strong>AMQP</strong> <strong>Transport</strong> v. 1-0 Page 60 of 83
Change language